User Guide

4 Replacement Procedures 4.29 LCD/digitizer harness & Wireless LAN antenna cables
Satellite R10 Maintenance Manual (960-509) 4-65
7. Remove the LCD harness ground plate from the display cover.
8. Remove the following screws and LCD harness hold plate from the display
cover.
? M2.5x6.0B FLAT BIND screw x2
9. Remove the following screws securing the hinge assembly.
? M2.5x6.0B FLAT BIND screw x2
10. Detaching the hinge assembly from the display cover, remove the hinge cap from
the hinge assembly.
Figure 4-44 Removing the hinge assembly
11. Pull out the LCD harness through the hole of hinge assembly.
12. Pull out the digitizer harness through the hole of hinge assembly
13. Pull out the wireless LAN antenna cables through the hole of hinge assembly
14. Peel off the wireless LAN antennas and remove them from the display cover.
M2.5x6.0B FLAT BIND
LCD harness ground plate
M2.5x6.0B FLAT BIND
LCD harness
hold plate
Hinge cap