User Guide

4.30 Hinge Switch Board 4 Replacement Procedures
4-68 Satellite R10 Maintenance Manual (960-509)
4.30 Hinge Switch Board
Removing the hinge switch board
The following describes the procedure for removing the hinge switch board. (See Figure
4-46.)
1. Remove the following screws and hinge switch board.
? M2.0x3.0B FLAT BIND screw x2
2. Remove the plate placed under the hinge switch board.
Figure 4-46 Removing the hinge switch board
Installing the hinge switch board
The following describes the procedure for installing hinge switch board. (See Figure 4-
46.)
1. Install the plate fitting to the bosses on the hinge assembly.
2. Install the hinge switch board and secure it with the following screws.
? M2.0x3.0B FLAT BIND screw x2
M2.0x3.0
B
FLAT BIND
Hinge switch board