Operation Manual
20
Connections
AV
S
SELECT
P
I
VIDEO OUT AUDIO OUT
SUBWOOFER SURROUND
FRONT
CENTER
COAXIAL OPTICAL
DIGITAL
L
R
5.1CH
SURROUND
2CH BITSTREAM
/ PCM
VIDEO
Y
P
B
P
R
AC IN
Notes
• Refer to the owner’s manual of the connected equipment as well.
• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
• If your television set has one audio input, connect the DVD player to a Y cable adapter (not supplied) and then connect to
your TV.
• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD
player away from the tuner and radio.
• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
Connecting to a TV (Using the phono type jacks)
AV
S
SELECT
P
I
VIDEO OUT AUDIO OUT
SUBWOOFER SURROUND
FRONT
CENTER
COAXIAL OPTICAL
DIGITAL
L
R
5.1CH
SURROUND
2CH BITSTREAM
/ PCM
VIDEO
Y
P
B
P
R
AC IN
Normal TV
TV equipped with
an S video input
Select the connection type depending on the TV. (TV equipped with an S video input / Normal TV)
To wall outlet
To wall outlet
Signal flow
Signal flow
To 2CH AUDIO OUT
(R:red, L:white)
To S VIDEO OUT
To VIDEO OUT
(yellow)
To 2CH AUDIO OUT
(R:red, L:white)
S video cable
Audio cable
Audio/video cable
To audio
input
To video input
(yellow)
To STo audio
input
Connecting to a TV (continued)
• Make the following setting.
“Bitstream” or “PCM”
TV
TV equipped with an
S video input
Normal TV
See “Customizing the Function Settings” beginning from
56
.
Setting
“Video Out Select”
60
“Audio Out Select”
61
“Bitstream” or “PCM”
“S Video”
No need to set.