DATA PROJECTOR Operations Maintenance (SVGA / With Document Camera) Preparations (SVGA) Others TDP-S25 TDP-SC25 Before Using OWNER’S MANUAL
Before Using The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
10. Lightning storms 12. Do not place the product vertically For added protection for this product during storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. However, while it is thundering or lightning, do not touch the apparatus and any connected cable and/or equipment. This will prevent you from receiving the electric shock by an electric surge.
19. Replacement Parts 22. Do not get your hands between the camera arm and the main unit when setting the camera arm back in its original position. (Models equipped When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.
OTHER CAUTIONS AND INFORMATIONS Avoid Volatile Liquid Copyrights Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions. In the spaces provided below, record the Model and Serial No. located at the bottom of your projector. Model No. Serial No.
Before Using Others SAFETY PRECAUTIONS .................................................................................. IMPORTANT SAFETY INSTRUCTIONS ........................................................... POWER SUPPLY CORD SELECTION ............................................................. IMPORTANT PRECAUTIONS ........................................................................... EXEMPTION CLAUSES ....................................................................................
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If any item is missing, please contact the store immediately where you purchased the product.
Names of each part on the control panel and remote control Control panel Parts on the rear panel Remote Control (6) (5) MONITOR AUDIO OUT (2) (1) (4) (3) Remote control transmitter CONTROL S-VIDEO R TEMP FAN (1) (8) (2) (3) (6) (4) (13) (12) AUDIO IN COMPUTER 1 IN ( Y/PB/PR ) (15) (14) (13) VIDEO (2) (1) (3) (7) (8) (4) (6) (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (7) (5) Name : Main Function ENTER button MENU button SET UP button ON/STANDBY button ON indic
Names of each part on the document camera (TDP-SC25) (1) (6) (7) (4) (2) (3) Preparing and using the remote control ■ Loading dry-cell batteries into the remote control ■ Operating the remote control q Remove the battery cover. Point the remote control toward the projector’s infrared remote sensor, and press a button on the remote control.
Placement Connection Placement Styles Before connection As shown in the figures below, this device can be placed in 4 different styles. The factory setting is “floor-mounted front projection.” Set the Projection mode in the default setting menu p.32 , in accordance with your needs. • Read the owner’s manual of the device you are connecting to the projector. • Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.45 , etc.
Operations Turning the power on and off ■ Connecting the power cord Notes 1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or (Supplied) Power cord connector other power outlet. • The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the start-up screen not to appear via the Display setting menu p.31 .
Basic operations 5 Projector placement angle adjustments Turn on the power by following the instructions in “Turning on the power” p.22 . 2 Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, menu for language and lamp power selection and configuration is displayed in English. (If the screen is out of focus, adjust it according to the step 6 .) q Use the or button to select the desired language and press the button.
Using handy features ■ Using auto setting ● Manual adjustments and settings Control panel Remote Control 1 Press the SET UP button. The Set up menu appears. 2 Press the SET UP button again. The menu items of the Set up menu vary depending on the input type, as shown in the table below. buttons to adjust the items in the table below, then press Use the the RETURN button when you are finished. Select Item The menu item is automatically adjusted/set.
Using handy features (Continued) Using the menus ■ Cutting off the picture and sound temporarily (Mute) You can call up on-screen menus, and conduct a number of adjustments and settings using the operation buttons p.16 on the control panel (main unit side) and remote control. Remote Control The menu shown below is for operation instructions purposes and might differ from the actual display. Press the remote control’s MUTE button. The picture and sound are cut off.
Using the menu (Continued) ■ The image adjustment menu ■ The display setting menu Use this menu to adjust image-related items. Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Use this menu to set screen display-related items. Contrast Description Computer Y/PB/PR Adjust the image contrast. Higher Lower Video Camera S-video Yes Yes Yes Yes Brightness Adjust the brightness of the image.
Using the menu (Continued) ■ The default setting menu ■ Displaying Information (Status display) This menu shows placement status and other settings. This displays information about the input signal, lamp use time, etc. Description “Yes”: displayed, “No”: not displayed Projection mode Sets projection mode in accordance with Placement Style. No signal power off Set the timer to wait for the power to be turned off after signal input stops. Press . Switch with and . Off (not turned off)/1 min./5 min.
Using the document camera Please read this chapter if the model you purchased is TDP-SC25 which includes a document camera. ■ How to use the document camera Using the camera removed from the projector Status before preparation (When stored) Using the camera attached on the projector Status before preparation (When stored) 1) Set up arm. 1) Disconnect the RGB cable, then slide the lock switch to release lock. 2) While pushing the lock lever in the arrow direction, lift up the document camera.
Using the document camera (Continued) ■ Image projection with the document camera 1 Place the document. 6 If the screen is too dark or too bright, use the CAMERA GAIN (+/–) buttons to make it easier to see. The Sharpness of the camera image can also be adjusted using the Image adjustment menu p.30 . Set the document at the side of the projector. 7 After use, fold up the document camera. Fold up the camera using the reverse order from unfolding the document camera p.34 .
Maintenance About lamp ■ Immediately replace the lamp when a sign appears on the screen. • When the replacement time approaches, a message will appear on the screen. • The risk of burst will increase if the lamp is continuously used without being replaced. • Frequently check the used hours and prepare spares when the replacement time approaches. (Refer to “Status display”. p.
Others Lamp replacement (Continued) Used Lamps Trouble indications The indicator lights inform you of internal abnormalities. This projector’s lamps contain trace amounts of environmentally harmful inorganic mercury. Be careful not to break used lamps, and dispose of them in accordance with local regulations. TEMP FAN LAMP No power ⇒ Problem with projector • Unplug the power cord, and contact your dealer.
Before calling service personnel If you think something is wrong, check the followings before contacting customer service. Please see “Trouble indications” p.41 as well. If This Happens Check No power • Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover loose? p.39 Power goes out during use • Is the ambient temperature high? p.41 • Is the air intake or air exhaust blocked? No picture • • • • • Is the projector turned on? p.24 Is the mute function on? p.
Specifications ■ List of general specifications Item ■ List of supported signals (RGB signals) Specification 250 W TDP-S25: 3.0 kg Weight TDP-SC25: 3.9 kg External Dimensions TDP-S25: 285 × 98 × 254 mm (W × H × D) (including protruding parts) TDP-SC25: 369 × 98 × 259 mm (W × H × D) Cabinet material* PC+ABS resin and ABS resin Conditions for usage environment Temp: 5°C to 35°C; relative humidity: 30% to 70% Display pixels 1 chip DMD™ Picture elements 480,000 pixels (800H × 600V) Lens Zoom lens F=2.0-2.
Specifications (Continued) ■ CONTROL terminal Signal format 480i(525i)@60Hz 480p(525p)@60Hz 576i(625i)@50Hz 576p(625p)@50Hz 720p(750p)@60Hz fh(kHz) 15.73 31.47 15.63 31.25 45.00 fv(Hz) 59.94 59.94 50.00 50.00 60.00 720p(750p)@50Hz 1080i(1125i)@60Hz 1080i(1125i)@50Hz 1035i(1125i)@60Hz 1152i(1250i)@50Hz 37.50 33.75 28.13 33.75 31.25 50.00 60.00 50.00 60.00 50.00 ■ List of supported signals (Video, S-Video signals) Video mode fh(kHz) fv(Hz) fsc(MHz) NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 15.
