TEC Electronic Computing Scale SL-9000/9000N-FFB SERIES Owner’s Manual Table of Contents
Safety Summary Safety Summary Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions necessary for safe handling are included in this manual. All warnings and cautions contained in this manual should be read and understood before handling or maintaining the equipment. Do not attempt to effect repairs or modifications to this equipment.
Safety Summary Disconnect the plug. Connect a grounding wire. If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorized TOSHIBA TEC representative for assistance. Continued use of the machine in that condition may cause fire or electric shock. Disconnect the plug. When unplugging the power cords, be sure to hold and pull on the plug portion.
TABLE OF CONTENTS Page 1.INTRODUCTION ............................................................................................. 1.1 APPLICABLE MODEL ........................................................................... 1.2 ACCESSORIES .................................................................................... 1-1 1-2 1-2 2. SPECIFICATIONS ........................................................................................... 2.1 SCALE ...............................................
Page 12. PROGRAMMED DATA VERIFICATION REPORTS ....................................... 12-1 13.PASSWORD SECURITY ................................................................................. 13-1 13.1 SETTING PASSWORD AND PROTECT MENU................................... 13-1 13.2 CALLING MENU BY ENTERING PASSWORD .................................... 13-3 14. OPERATING PROCEDURES ......................................................................... 14-1 14.1 WEIGHING OPERATION .........................
EM1-31064 1. INTRODUCTION 1. INTRODUCTION 1. INTRODUCTION Thank you for purchasing the TEC SL-9000 Series electronic computing scale. As you will discover, the TEC SL-9000 series has many features and functions designed for user friendliness as well as complete customer satisfaction. The 256 x 64 dot fluorescent display provides customers with ample information, the 140 speed keys realize a higher degree of operability, and the 3 inch/sec. print speed ensures fast and clear printing.
EM1-31064 1. INTRODUCTION 1.1 APPLICABLE MODEL 1.1 APPLICABLE MODEL • SL-9000-15M-FFB-CA • SL-9000-30M-N-FFB-US • SL-9000-15M-FFB-QR • SL-9000-15M-N-FFB-CA • SL-9000-15M-N-FFB-QR The description of the model number is as follows. SL-9000-30M-N-FFB-US Destination Code Max. Capacity ex.) US, CA, QR etc. 30M: 30 lbs (decimal pound/multi-interval) Keyboard Type B: Built-in keyboard 15M: 15 Kg (multi-interval) Display Type FF: Fluorescent full dot display N: LAN (option) is available.
2. SPECIFICATION EM1-31064 2.1 SCALE 2. SPECIFICATION 2.1 SCALE Item US CA Maximum Capacity Minimum Scale Division 30 lb 0.005 lb (0~15 lb) QR Maximum Tare Display Range 2.000 lb 0 ~ 30.05 lb 15 Kg (30 lb) 0.002 Kg (0 ~ 6 Kg) 0.005 Kg (6 ~ 15 Kg) 0.005 lb (0 ~ 15 lb) 0.01 lb (15 ~ 30 lb) 1.000 Kg (2.205 lb) 0 ~ 15.025 Kg (0 ~ 30.05 lb) Unit Price Presettable Minimum Price Display $0.01 ~ 99.99 $0.01 $0.01 ~ 99.99 $0.
EM1-31064 2. SPECIFICATION 2.2 OPTION 2.2 OPTION Option Name Model No. or Part No. Description Source LON Connector TM8P-88P Part No. EAJ-0028001 A modular connector used to connect scales See Note 2 to each other in a LON configuration. LON Terminal Resistor 285D-8P Part No. EAJ-0029001 A modular resistor attached to the scales See connected at both ends of the LON Note 2 configuration. LON Cable S-STLAN-2P (200 m/roll) Part No.
EM1-31064 3. APPEARANCE 3. APPEARANCE 3.
EM1-31064 4. DISPLAY 4.1 US TYPE 4. DISPLAY 4.1 US TYPE SL-9000N CAPACITY WEIGHT 0 ~ 15 lb 15 ~ 30 lb e=d 0.005 lb 0.01 lb SCROLLING MESSAGE INDICATES SCALE AT ZERO 4.2 CA/QR TYPE SL-9000N CAPACITY WEIGHT 0 ~ 6 Kg CAPACITÉ 6 ~ 15 Kg e=d WEIGHT e=d 0.002 Kg 0 ~ 15 lbs 0.005 lbs 0.005 Kg 15 ~ 30 lbs 0.01 lbs NOTE: For the SL-9000 model, the model name on the display panel is "SL-9000".
EM1-31064 5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD 5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD SHIFT SET NEXT NEXT PLU AUTO CODE SEND RECEIVE ↑ ↓ CHANGE DELETE RETURN PLU PLU 1/4 ENTER - TEST ← → DELETE INSERT DELETE (A) (B) 1 1/2 " 2 # 3 $ 4 % 5 & 6 ´ 7 ` 8 ? 9 @ 0 * Q + W ( E ) R / T : Y ; U < | = O > P [ A \ S ] D ˆ F G { H J } K ~ L - È Z É X Â C Ê V → B ← N ↓ M ↑ SPACE , ZERO NOTE: > ! 1 -- PROG. CLEAR . FEED Blank keys have no function.
EM1-31064 5. KEY LAYOUT 5.1 PROGRAMMING KEYBOARD Function Name of Key _ ← → 1. Displays the preceding PLU data. 2. Used for setting an auto code. 3. Calls the preceding label format # when setting the print position. Moves the cursor to the left. Moves the cursor to the right. DELETE (A) 1/2 1. Deletes the character selected by the cursor when setting commodity name or message. 2. Sets a unit price per 1/2 lb. INSERT 1 1.
EM1-31064 5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBOARD 5.
EM1-31064 5. KEY LAYOUT 5.2 OPERATION KEYBOARD AND SPEED KEYBOARD Operation Keyboard Function Function Name of Key PRT/* Prints a customer label. Saves tare and unit price after taking off the commodity from the platter. SAVE FOR DT/TM NEXT PLU VOID Sets the quantity of a commodity in "BY COUNT" mode. Displays the date. Selects the item for change Print/OFF. Corrects data just after the registration. 1. Enables calling the other 70 speed keys. 2. Selects the function for change Print/OFF. ESC.
EM1-31064 5. KEY LAYOUT 5.3 SELF SERVICE KEYBOARD Name of Key Function No function GROUP # No function ST This key is used for item or subtotal discount by entering a percentage. (Optional key by initial setting) % Feeds the label. FEED Issues a test label. TEST Adjusts the zero point. ZERO Changes the label issue mode between automatic issue and manual issue. (Optional key by initial setting) AUTO/ MANUAL 1 70 Calls the assigned PLU. to 5.
EM1-31064 5. KEY LAYOUT 5.3 SELF SERVICE KEYBOARD (For Programming/Unit-Price Change/Read Reset/Security) SHIFT NEXT PLU SET NEXT AUTO CODE ESC. PROG.
EM1-31064 6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 6. PROCEDURE BEFORE OPERATION 1. 2. 3. 4. 5. 6. 7. 8. 9. Unpack the accessories and scale from the carton. Install the remote display on the scale. (See Page 7-1.) Refer to Safety Precautions in this manual and set up the scale in a proper location. Load the label or receipt. (See Page 9-1.) Be sure to insert the power cord plug into an AC outlet. Adjust the level gauge. (See page 8-1.) Connect a PC-AT keyboard if necessary.
EM1-31064 7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE 7. INSTALLATION PROCEDURE Remote Display WARNING! Be sure to cover the connectors with the connector cover because of high voltage and current. If the connectors are exposed to water, a leakage may result. CAUTION: Never place the scale upside down. Doing so will cause a malfusction. 1. To install the remote display, insert the two screws provided on the bottom of the remote pipe into the holes in the scale base. 2.
EM1-31064 8. LEVEL ADJUSTMENT 8. LEVEL ADJUSTMENT 8. LEVEL ADJUSTMENT 1. Level Gauge Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle. Correct Incorrect 2. Adjustment Procedure 1 When the air bubble moves toward the left side, turn the right adjustable legs clockwise. 2 When the air bubble moves toward rear, turn the front adjustable legs clockwise.
EM1-31064 9. REMOVAL AND REPLACEMENT OF MEDIA 9. REMOVAL AND REPLACEMENT OF MEDIA 9. REMOVAL AND REPLACEMENT OF MEDIA WARNING! Since there is a cutter at the paper outlet, be careful not to injure your fingers when replacing media. CAUTION: Do not hold the label cassette by the portion A. Doing so may deform the label cassette, causing damage when setting it in position. Please be sure to hold the label cassette as the following figure shows. A 1. Open the right cover.
9. REMOVAL AND REPLACEMENT OF MEDIA EM1-31064 9. REMOVAL AND REPLACEMENT OF MEDIA 4. Loosen the P-2.6x6 screw and move the label guide plate according to the media width. 5. Secure the label guide plate with the P-2.6x6 screw. Screw (P-2.6x6) 48-mm label dowel Label Guide Plate 57-mm label dowel NOTE: Ensure that the label guide plate aligns with the dowel. 6. Refer to the figure below and set the media on the label cassette. 7. Insert the roll stopper into the media core fully. 8.
EM1-31064 10. OUTLINE OF OPERATION 10. OUTLINE OF OPERATION 10. OUTLINE OF OPERATION WARNING! Since there is a cutter at the paper outlet, be careful not to injure your fingers when issuing labels. Main Power Switch ON 2 Display OFF Main Menu Press the POWER key NEXT PLU 1 VOID Increment Decrement Scanning Display Press the POWER key or NOTE4 Press ESC Key 2 Menu Select the #1 Menu # Other than Menu #1. No Press Unnecessary Password Necessary Password Input Menu No. 2 Menu No.
EM1-31064 10. OUTLINE OF OPERATION 10. OUTLINE OF OPERATION ■ Registration Mode O:AVAILABLE No.
EM1-31064 11. PROGRAMMING PROCEDURES How to access the Programming Menu 11. PROGRAMMING PROCEDURES How to access the Programming Menu Enter a menu number ESC. 0 Select the programming menu Page unnecessary neccesary Password Programming starts Enter the Password Programming completes Select an item No. (See next page.) 0 ~ 9 PROG. NOTES:1. When the selected menu ( 0 ) is protected from an access, refer to Section 13.2 and enter the password. 2. In Sections 11.1, 11.2 and 11.
EM1-31064 11. PROGRAMMING PROCEDURES How to access the Programming Menu Table 1: NO. Title and Contents of Programming Menu TITLE MENU Page ITEM No.
EM1-31064 11. PROGRAMMING PROCEDURES How to enter characters How to enter characters Use the following procedure to enter a commodity name, address and ingredient message. Example) 1st line: TEC STORE 2nd line (TEL) 0123-45-6789 T E C SPACE S T O R E RETURN 1/4 1st line content SHIFT ( SHIFT T E DELETE E (A) 1/2 L 6 7 8 9 2nd line content NOTES: 1. ← and → keys are the cursor keys. 2.
EM1-31064 11. PROGRAMMING PROCEDURES 11.1 UNIT PRICE CHANGE 11.1 UNIT PRICE CHANGE Menu Page: Item No.: 1 0 The unit prices stored in PLU can be changed with this menu. In this procedure, use the operation keys (except when calling a PLU by using a speed key). a
EM1-31064 11. PROGRAMMING PROCEDURES 11.2 PLU DATA SETTING 11.2 PLU DATA SETTING Menu Page: Item No.: 1 1 Setting or changing the contents of PLU (PLU#, UPC#, Commodity Name, etc.). b
11. PROGRAMMING PROCEDURES EM1-31064 11.2 PLU DATA SETTING Pressing the ↓ key instead of the ENTER key proceeds to the next menu. Pressing the ↑ key returns to the preceding menu. Verification label of PLU data PACKED ON Preset Tare Quantity PLU# SELL BY T1.000 NET WT. C T15.0% PRICE lb Commodity Name Mode Flag (W: Weigh, F: Fix, B: By-count) Compulsory Tare (C: Compulsory, Blank: Not compulsory) Shelf Life Preset % Tare Price UPC# TEC STORE (TEL) 0123-45-6789 NOTES: 1.
EM1-31064 11. PROGRAMMING PROCEDURES 11.3 INGREDIENT MESSAGE 11.3 INGREDIENT MESSAGE Menu Page: Item No.: 1 2 Ingredient messages can be printed on a label with a maximum of 54 characters per line in small letters or 32 characters per line using boldfaced small letters, by up to 38 lines. C
EM1-31064 11. PROGRAMMING PROCEDURES 11.4 NUTRITION FACTS 11.4 NUTRITION FACTS Menu Page: Item No.: 1 3 Using the following procedure, nutrition information and caloric intake can be set. Serving Size and Servings Per Container consist of a maximum of a 18 characters. However, total number of characters including title characters must not exceed 30. d f
EM1-31064 11. PROGRAMMING PROCEDURES 11.4 INUTRITION FACTS A Additional Information Area 2~6. (0~99999 or 0.0~999.9) e ENTER Enter the Vitamin A. (0~999) ENTER Enter the Vitamin C. (0~999) ENTER Enter the Calcium. (0~999) ENTER Enter the Iron. (0~999) ENTER Additional Information Area 7~12 (0~999) PROG.
EM1-31064 11. PROGRAMMING PROCEDURES 11.4 INUTRITION FACTS • Set the Daily Value Table d AUTO CODE Enter the Basic Calories. (Content No. 1) Enter the Basic Saturated Fat. (Content No. 3) ENTER Enter the Basic Total Fat. (Content No. 2) Enter the Basic Cholesterol. (Content No. 4) ENTER Enter the Basic Sodium. (Content No. 5) ENTER Enter the Basic Dietary Fiber. (Content No. 7) ENTER Enter the Basic Total Carbohydrate. (Content No. 6) ENTER ENTER ENTER ee NOTES: 1. DAILY VALUE (Max.
EM1-31064 11. PROGRAMMING PROCEDURES 11.4 INUTRITION FACTS • Deleting Nutrition Data d DELETE PLU Enter the PLU#. (max. 6 dig.) ENTER e • Memory file sort The memory file is sorted when a memory full error occurs.
EM1-31064 11. PROGRAMMING PROCEDURES 11.5 PLU VERIFYING LABEL 11.5 PLU VERIFYING LABEL Menu Page: Item No.: 1 4 PLU data stored in the scale are verified in the following procedure. g
EM1-31064 11. PROGRAMMING PROCEDURES 11.6 ADDRESS AND COMMERCIAL MESSAGE SETTING 11.6 ADDRESS AND COMMERCIAL MESSAGE SETTING Menu Page: Item No.: 1 5 A store address printed on label and a commercial message shown on the display can be set within the following character limits using the procedure below.
EM1-31064 11. PROGRAMMING PROCEDURES 11.7 COMBINATION MESSAGE 11.7 COMBINATION MESSAGE Menu Page: Item No.: 1 6 You can combine some messages set in Section 11.6 together and create a maximum of 24 different combination messages. Message construction 8 7 6 5 n n n n 4 3 2 1 n n n n Message display time: Message display time ranges from 00 to 99 (seconds). When "00" is entered, no message will be displayed. 3rd message: 01 to 08: represents message No. 1 to 8 11 to 23: represents logo No.
EM1-31064 11. PROGRAMMING PROCEDURES 11.7 COMBINATION MESSAGE 3. Display method varios depending on message construction. 1) message combination a. single message ............. either scrolling or fixed is available. b. multiple message .......... scrolled regardless of selection. 2) logo combination Logo must be a single logo and a fixed display. When logos are combined, no message will be displayed. 3) combination of message and logo It is prohibited.
EM1-31064 11. PROGRAMMING PROCEDURES 11.8 SPECIAL INFORMATION 11.8 SPECIAL INFORMATION Menu Page: Item No.: 1 7 When the Net Weight Statement label is selected, 3 lines (32 characters/line) of special information can be printed on the label position where the net weight data is to be printed. The special information can be printed in the weigh and By Count mode. In the Fix mode, the net weight data is printed.
EM1-31064 11. PROGRAMMING PROCEDURES 11.10 SPEED KEY SETTING 11.10 SPEED KEY SETTING Menu Page: Item No.: 1 9 The SL-9000 has a maximum of 70x2 speed keys which are very convenient to call PLUs quickly. (Refer to page 5-3 regarding the Key Layout.) i
11. PROGRAMMING PROCEDURES EM1-31064 11.11 PRINT FORMAT 11.11 PRINT FORMAT Menu Page: Item No.: 2 0 The SL-9000 can memorize 5 different print formats. After print formats are set, you can call them by entering the print format number.
EM1-31064 11. PROGRAMMING PROCEDURES 11.11 PRINT FORMAT Table 2: Label Format Number Table Select the format # for the label to be used by referring to the table below. Format No. 00 10 11 12 13 14 15 16 21 22 23 24 25 26 31 32 33 34 35 36 41 42 43 * 44 48 49 (50) (60) (61) (62) (63) (64) (65) (66) (71) (72) (73) (74) (75) (76) (81) (82) (83) (84) (85) (86) (91) (92) (93) (94) Print format ING. Commodity Basic form NON POS POS 0 0 6 12 18 22 38 37 NET WT.
EM1-31064 11. PROGRAMMING PROCEDURES 11.12 DATE/TIME SETTING 11.12 DATE/TIME SETTING Menu Page: Item No.: 2 1 Date, time, machine number, and store code are set in this procedure. k
EM1-31064 11. PROGRAMMING PROCEDURES 11.12 CMT/PL-3 PL-3 Operation Connect the PL-3 to the SL-9000 by using RS-232C Cable, then turn on the power of the SL-9000 and the PL-3. Insert a data disc into the PL-3 and adjust the transmission rate to the SL-9000 ( 7 2 : 4800 BPS or 7 3 : 2400 BPS) by using the rotary switch. Press the SAVE key of the PL-3, then check whether the SAVE LED is on. Program the file number of the data disc by using the rotary switch. ( 4 1 : File No. 1, 4 2 : File No. 2, .....
EM1-31064 11. PROGRAMMING PROCEDURES 11.12 CMT/PL-3 Table4 : Transmission Item List ITEM # Title on the Display Contents of Transmission 2 VERIFY PLU & ING = CMT 2 COMPARE PLU & ING. IN OLD FORMAT 3 READ PLU & ING. FM CMT 3 READ PLU & ING. IN OLD FORMAT 4 WRITE PLU TO CMT 4 SAVE PLU IN NEW FORMAT 5 VERIFY PLU = CMT 5 COMPARE PLU IN NEW FORMAT 6 READ PLU FM CMT 6 READ PLU IN NEW FORMAT 7 WRITE ING TO CMT 7 SAVE ING. IN NEW FORMAT 8 VERIFY ING = CMT 8 COMPARE ING.
EM1-31064 11. PROGRAMMING PROCEDURES 11.14 IN-LINE/LOCAL 11.14 IN-LINE/LOCAL Menu Page: Item No.: 2 3 When the SL-9000 is used as a satellite in an in-line system, the “ID #” and “Transmission delay time” can be set by the following procedure.
EM1-31064 11. PROGRAMMING PROCEDURES 11.15 LON SYSTEM 11.15 LON SYSTEM Menu Page: Item No.: 2 4 The SL-9000 scales which consist of a master, satellites, and a backup master are connected each other by the LON cable to transmit data such as PLU, ING., NUTRI, etc. ID# 1 is reserved for the master terminal. ID# 2 is reserved for the backup master terminal or satellite terminal. ID# 3 to 32 are for satellite terminals. Setting numbers other than the above results in an error.
EM1-31064 11. PROGRAMMING PROCEDURES 11.15 LON SYSTEM Data Transmission The following data is down-line-loaded. Page 1: (0). All (PLU+ING+NUTRI) Page 2: (0). SPEED KEY (1). PLU (1). LOGO (2). ING. (2). VENDOR (3). NUTRITION (3). FREE FORMAT (4). U. PRICE (4). ADDRESS (SL-9000N only) (5). DATE/TIME (5). INITIAL (#0 ~ #19, SL-9000N only) (6). MESSAGE LINK (Message) (9). CHANGE PAGE (7). LOCK SCALE (Check the LON cable) (8). OPEN SCALE (Release the lock after checking the LON cable.) (9).
EM1-31064 11. PROGRAMMING PROCEDURES 11.16 BAR CODE FORMAT 11.16 BAR CODE FORMAT Menu Page: 2 Item No.: 6 With the SL-9000 scale, four kinds of bar code formats are available. These formats can be changed freely. Example) Current format 2 9 C1 C2 C3 Flag Changed format 0 C4 C5 C6 P2 P3 UPC # 2 C2 C3 C4 Flag P4 P5 C/D Price C5 C6 P1 PC/D P2 Total check digit P3 P4 C/D Price check digit or Total check digit weight check digit.
EM1-31064 11. PROGRAMMING PROCEDURES 11.16 BAR CODE FORMAT 2. When the ENTER key is pressed, bar code format is checked. An error occurs in the following cases. 1 Check digit (C/D) is at other than digit-13. 2 Price check digit (PC/D) cannot be calculated. (Price is other than 4 or 5 digits.) 3 Price is not set serially beginning from P1 (P1 to P4, or P1 to P5). 4 Weight is not set serially beginning from W1 (W1 to W5). 3.
EM1-31064 11. PROGRAMMING PROCEDURES 11.17 TITLES 11.17 TITLES Menu Page: Item No.: 2 7 You can register and change displayed/printed titles of the additional information area for nutrition facts using the following procedure. Registered or changed titles are stored in the RAM. When ALL clear or RAM clear is executed, these titles will be cleared and the initial titles will resume. Before starting this operation, set the initial setting #7-3 to 1.
EM1-31064 11. PROGRAMMING PROCEDURES 11.18 TRANSFERRING LOGO DATA 11.18 TRANSFERRING LOGO DATA Menu Page: Item No.: 2 8 Logo data is created on a PC and stored into RAM through the CMT interface. Two different sizes of logos, 320x118 dots and 256x64 dots, are available on the SL-9000 series. 64KB of RAM area is secured for logo data, in which the maximum of 13 logos (320x118 dots) or 26 logos (256x64 dots) can be stored. Before starting the following operation, set the initial setting #10-7 to 1.
EM1-31064 11. PROGRAMMING PROCEDURES 11.18 TRANSFERRING LOGO DATA
EM1-31064 11. PROGRAMMING PROCEDURES 11.19 IDIOM SETTING 11.19 IDIOM SETTING Menu Page: Item No.: 2 9 Up to 50 terms frequently appearing in ingredient messages can be preset using the following procedure. The idiom number must be set from 1 to 50 in order. One idiom can contain a maximum of 20 characters. r
EM1-31064 11. PROGRAMMING PROCEDURES 11.21 FREE FORMAT SETTING 11.21 FREE FORMAT SETTING Menu Page: Item No.: 3 1 When using 57-mm wide labels, up to three print formats can be changed freely. Moreover, characters can be rotated and magnified, and print items are salectable. Enter the coordinate of each print item’s lower left corner using the lower left corner of a label as the origin. When a print item is located beyond the label width, an error will occur.
11. PROGRAMMING PROCEDURES EM1-31064 11.21 FREE FORMAT SETTING NOTES: 1. The following print items cannot be magnified. 1 LOGOs 2 Safe handing precautions 3 Ingredient messages 4 Bar code 5 FSP block (SL-9000N only) 2. Base label format numeric data is shown automatically. X coordinate: 0-383 dots (1 dot = 0.132 mm) Y coordinate: 0-1300 dots (1 dot = 0.154 mm) Format data beyond the effective print area results in an error. 3.
EM1-31064 11. PROGRAMMING PROCEDURES 11.21 FREE FORMAT SETTING Print area size No.
EM1-31064 12. PROGRAMMED DATA VERIFICATION REPORTS 12. PROGRAMMED DATA VERIFICATION REPORTS 12. PROGRAMMED DATA VERIFICATION REPORTS The programmed data can be printed on journal paper. Before issuing these reports, load the journal paper. The programmed data verification reports cannot be issued with any label. The keys to be used in the following procedures are those on the numeric key pad, which is framed in black in the figure on page 53, but not on the programming keyboard.
12. PROGRAMMED DATA VERIFICATION REPORTS EM1-31064 12. PROGRAMMED DATA VERIFICATION REPORTS Table 7 Report Name Menu # Contents 50 PLU programmed data report All the preset PLU data are listed in the PLU # order (from small to large #). 51 Commodity description report All the preset commodity names are listed in the PLU # order (from small to large #). 52 Speed key programmed data report The PLU # and the commodity name preset on each speed key is listed.
13. PASSWORD SECURITY EM1-31064 13.1 SETTING PASSWORD AND PROTECT MENU 13. PASSWORD SECURITY You can protect all menus (except REG. menu) and set two step passwords for access to protected menus. 13.1 SETTING PASSWORD AND PROTECT MENU
13. PASSWORD SECURITY EM1-31064 13.1 SETTING PASSWORD AND PROTECT MENU B Enter password B in 4 digits. 1 2 3 4 PRT * Select the menus the password B cannot access. Remote display P M R S X Z O X O O X O: Valid 2 6 PRT * w X: Invalid : Not need ESC. NOTES: 1. Select validity of the password by pressing the key. 2. When the same password is entered for password A and B, password A has priority over the password B. 3.
13. PASSWORD SECURITY EM1-31064 13.2 CALLING MENU BY ENTERING PASSWORD 13.2 CALLING MENU BY ENTERING PASSWORD ESC.
EM1-31064 14. OPERATING PROCEDURES ■ NOTES BEFORE STARTING OPERATION 14. OPERATING PROCEDURES ■ NOTES BEFORE STARTING OPERATION (1) Insert the power plug into the AC outlet and turn the power ON. (2) A sixteen-second scanning will be performed after pressing the POWER key. (3) Do not move the unit while it is in operation. Should it become necessary to move it at any time, turn the power switch to the OFF position and be sure to reajust the level indicator after relocating the scale.
EM1-31064 14. OPERATING PROCEDURES 14.1 WEIGHING OPERATION 14.1 WEIGHING OPERATION Menu: REG., M. DOWN, or REWRAP Mode: WEIGH The weigh mode is used to weigh a commodity and to issue labels. The label contains data such as a weight, unit price (price per weight) and total price (calculated as a result of the weighing operation). The following is a basic operation seen at the sales floor of a store or at a back room where different kinds and weights of commodities are repacked.
14. OPERATING PROCEDURES EM1-31064 14.2 FIX PRICE OPERATION (FOR US TYPE ONLY) 14.2 FIX PRICE OPERATION (FOR US TYPE ONLY) The FIX mode (Fix Price Mode ) is used to issue a label for a commodity of a fixed price PLU (i.e. the price determined by the store), the weight of which may vary from commodity to commodity. In this mode, the Unit Price of the commodity looked up from the PLU file will be printed as the Total Price regardless of its actual weight, and the weight is also printed on the label.
EM1-31064 14. OPERATING PROCEDURES 14.3 BY COUNT OPERATION 14.3 BY COUNT OPERATION The BY-COUNT mode is used to issue the label of commodities in a package (or may not be packed). The whole package quantity (or a certain quantity) and the whole package price (or the price per the quantity) are usually preset. Thus, it is not necessary to weigh the commodities by the scale in such cases. Menu: REG., M.DOWN, or REWRAP Mode: BY-COUNT Example) In case of purchasing 10 DONUTS at the price of $1.
EM1-31064 14. OPERATING PROCEDURES 14.3 BY COUNT OPERATION Example) An open price item can be sold as below: 1 1 piece at 15 dollars 2 15 pieces at 10 dollars 3 15 pieces sold at 0.5 dollars per 10 pieces Enter the PLU #. 5 Press: 1 PLU ex.) 1 Enter quantity Press: 1 5 Enter price FOR ex.) 2 ex.
EM1-31064 14. OPERATING PROCEDURES 14.4 PRINT COUNT OPERATION 14.4 PRINT COUNT OPERATION With this procedure, a specified number of the same labels can be issued. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX or BY-COUNT Example A) When operating in Weigh mode. PRESET COUNT Press: Set the number of labels. (Max. 99 labels) 5 0 PRT Press: * Enter the PLU #. 3 0 9 Press: PLU PLU data is saved. SAVE 1 Remove the commodity. Place a commodity on the platter. (Ex. 0.700 lb.
EM1-31064 14. OPERATING PROCEDURES 14.4 PRINT COUNT OPERATION Example B) When operating in Fix or By Count mode. Press: PRESET COUNT Set the number of labels. (Max. 99) 2 5 PRT Press: * Enter the PLU #. 1 Press: 5 PLU [BY COUNT] PRT * Press, to save the PLU data: SAVE [FIX] SPLIT PRICE operation Place a commodity on the platter. (Ex. 1.320 lb.) MANUAL : Batch PRT The next label is issued after removing the current label.
EM1-31064 14. OPERATING PROCEDURES 14.4 PRINT COUNT OPERATION Example C) When issuing only the nutrition information label. Note that nutrition information can be printed only on several types of label. Refer to page 11-19. PRESET COUNT Select basic data and nutrition information labels or a nutrition information label by pressing this key. Set the number of labels. (Max. 99 labels) 9 9 PRT * Enter the PLU #.
EM1-31064 14. OPERATING PROCEDURES 14.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) 14.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) Menu: REG., M.DOWN, or REWRAP Mode: FIX When the initial settings #1-7 and #1-8 are set to 1, a Net Weight Statement is printed on the label. A unit price and a tare registered in each PLU are printed as a price and a net weight. Example) The preset Price is $2.10 and the preset Net Weight is 12 oz.
EM1-31064 14. OPERATING PROCEDURES 14.5 ISSUING LABELS WITH NET WEIGHT STATEMENT (FOR US TYPE ONLY) NOTES: 1. To print NET WT. data. from the FIX mode, load a label which has an area to print a NET WT Statement. 2. The quantity sold number and price data in NET WT. statement operation will be accumulated in the memory. No weight data will be accumulated. 3. The position of the decimal point is adjustable and a comma or period is selectable by the initial setting. 4. Weight data is shifted to the left. 5.
EM1-31064 14. OPERATING PROCEDURES 14.6 TARE/SAVE FUNCTION PROCEDURES 14.6 TARE/SAVE FUNCTION PROCEDURES Menu: REG., M.DOWN, or REWRAP Mode: WEIGH or FIX (Tare % function is available in WEIGH mode only.) There are two kinds of tare subtraction procedures, one is “Direct tare”, the other is “Preset tare”. The SAVE key is used to save the tare, unit price, and PLU data after taking a commodity from the platter. Tare % 0.200 lb 2 0 0 Place a container on the platter. (Ex. 0.
EM1-31064 14. OPERATING PROCEDURES 14.7 CALLING AND PRINTING GRADE LINES 14.7 CALLING AND PRINTING GRADE LINES A grade line is a short message added to a commodity name. A grade line can be selected from maximum of 49 programmed grade lines and printed on the label. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH or FIX, or BY COUNT Enter the PLU #. 3 1 Press: Press: Enter the G.LINE #. (1 to 49) Press: PLU MANU.
EM1-31064 14. OPERATING PROCEDURES 14.8 CALLING AND PRINTING LOGOS 14.8 CALLING AND PRINTING LOGOS When the initial setting #10-7 is set to “1”, a logo containing a picture, a mark, a POP message etc., can be printed on the ingredient label having 12 lines or more. Logo data is created on the PC and stored into the memory through the CMT/PL-3 interface. Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT Press: LOGO Select the LOGO type (LOGO (1) ↔ LOGO (2) ↔ F.
EM1-31064 14. OPERATING PROCEDURES 14.9 SELECTING PRINT ITEM 14.9 SELECTING PRINT ITEM Menu: REG, M.DOWN, or REWRAP Mode: WEIGH, FIX, or BY COUNT Press: PROG. NEXT PLU Select an item. (Refer to Table. 9) 1 ‘ 1 or VOID 1 2 0 7 0 2 7 ‘ 3 0 Print ←→ Non print 1: Print 0: Non print Idle time till the Auto message is displayed.
EM1-31064 14. OPERATING PROCEDURES 14.10 DATE CHANGE NOTES:1. A store code can be printed in place of a ‘packed on date’ and ‘sell by date’ by changing the initial settings #6-5 and #6-6. To print a store code, select ‘packed on date’ or ‘sell by date’ as a print item using the above procedure. 2. Setting data will not be changed by turning the power off, changing the mode or calling a PLU. 3. The 0 key has no function. 4.
EM1-31064 14. OPERATING PROCEDURES 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) Menu: REG., M.DOWN, or REWRAP Mode: FIX, or BY COUNT Up to 99 label per PLU can be issued in non-scale mode. Up to 30 items can be preset. (However, if 0 is preset, issuing will be canceled.) Enter the PLU #. 1 Item# ( 1 to 30) Press: PLU# Preset number of labels PLU MANU.
EM1-31064 14. OPERATING PROCEDURES 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) Changing a Unit Price and Calling G.Line/LOGO x Enter the quantity. Call the Grade Line. Enter the required Grade Line# (1 to 49). Press: 3 0 GRADE LINE 1 2 PRT * Call PLU designation LOGO. (See NOTE) LOGO Select the LOGO type (LOGO (1) ↔ LOGO (2) ↔ F. Shopper) SL-9000N only Enter the required LOGO# (1 to 26).
EM1-31064 14. OPERATING PROCEDURES 14.11 BATCH PRINT MODE (with 30 Items Run Assignment) Stopping or Canceling Label Issue z Clear an error or stop issuing a label. Cancel an output Press: C VOID PRT * Stop issuing the labels and cancel PLUs which have not been output. C A Completed NOTES: 1. When the label for NET. WT statement is not selected, pressing the PRESET COUNT key in FIX mode results in an error. 2. Programmed items are reset when: 1 the power is off. 2 changing the menu. (PROG.
EM1-31064 14. OPERATING PROCEDURES 14.12 VISUAL COMMODITY LIBRARY 14.12 VISUAL COMMODITY LIBRARY Menu: REG., M.DOWN, or REWRAP Mode: WEIGH, FIX or BY COUNT In the following procedure, entering a group # (the upper two digits of PLU#) allows you to call 6 commodities which belong to the group. This function is convenient when calling a commodity which PLU# you do not know. Enter a group #.
EM1-31064 14. OPERATING PROCEDURES 14.13 FLOATING VENDOR 14.13 FLOATING VENDOR Menu: REG Mode: WEIGH, FIX, or BY COUNT Floating vendor function allows you to register different commodities sales together. This function is available when the Initial Setting #11-1 is set to 1 and using a receipt. Be sure to select IN-LINE in Section 11.15 LON SYSTEM even if no scale is connected, then enter the ID# 1, turn the power off and then on.
EM1-31064 14. OPERATING PROCEDURES 14.13 FLOATING VENDOR (2) Restraints in case of clerks' name printing on labels 1) "GRADE LINE" can not be selected and printed. 2) Commodity name can not be printed on the 4th line of 57 mm width label and 2nd line of 48 mm width label, because 1 line of commodity is used for clerk's name printing. 3) The printing position of clerk name will be selected by the initial setting for GRADE LINE position. Initial 3-6 (G.
EM1-31064 15. TOTAL OPERATION 15. TOTAL OPERATION 15. TOTAL OPERATION In Read or Reset mode you can issue a sales report or reset report with either label or journal paper. Menu: READ or RESET REPORT The totals will not be cleared after they are printed on labels or journal paper. RESET The totals will be cleared after they are printed on labels or journal paper. 5 ESC. or 6 Issue each Report ESC. Label ←→ Journal No.
EM1-31064 15. TOTAL OPERATION 15.1 HOURLY TOTAL REPORT 15.1 HOURLY TOTAL REPORT Ex.) REPORT Menu 0 PRT * NOTES:1. When issuing an hourly report, hours with no sales are not printed. 2. An hourly report is printed as follows: 1) Label: Issued sequentially in on-demand mode. 2) Journal paper: Issued with journal paper. 3) Label with backing paper: Issued sequentially in batch mode. 3.
EM1-31064 15. TOTAL OPERATION 15.4 VENDOR TOTAL REPORT A Individual Total Ex.) Individual PLU Total (PLU #100) 1 0 PRT 0 * B Block Total Ex.) UPC Block Total (UPC #100100~100199) 1 0 0 PRT 1 * NOTE: The key represents 0 through 9. The most significant digit in the starting number is followed by an appropriate number of keys. C Zone Total Ex.) PLU Zone Total (PLU #100~107) 1 0 0 PLU 1 0 7 PRT * D Entire PLU Total PRT * NOTES:1.
EM1-31064 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE Take the following action if an error message appears on the commodity name display along with the buzzer sounding. WARNING! If you cannot solve the problem with the following solution instruction, do not attempt further troubleshooting by yourself. Turn the power off, unplug the scale, then contact TOSHIBA TEC Authorized Service representative for assistance.
EM1-31064 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE Label Issue Mode Message Cause Solution DATA ENTRY ERROR Error in key input. Press the C key, and re-input the right data. PLU NOT FOUND The PLU # being called is not registered. Press the C key, and check the PLU #. TOTALS OVERFLOW GRAND TOTAL or PLU TOTAL memory has been exceeded at the time of issuing a label. Press the C key, then the ESC. key and select ‘RESET’. Then sum up the exceeded memory.
EM1-31064 16. ERROR MESSAGE TABLE 16. ERROR MESSAGE TABLE CMT Operation Mode Message Cause Solution Mismatch of the model type. Mismatch of the base unit. MISMATCH SCALE SPEC Mismatch of the VERSION. Press the CLEAR key. Mismatch of the TRANSMITTING DATA. Mismatch of the scale capacity. Parity error Framing error Overrun error BAD TAPE OR CMT Press the CLEAR key. Data error Two or More Hardware error Press the CLEAR key.
EM1-31064 17. CLEANING THE PRINT HEAD 17. CLEANING THE PRINT HEAD 17. CLEANING THE PRINT HEAD WARNING! Since there is a cutter at the paper outlet, be careful not to injure your fingers when cleaning the print head and cutter. If the print head is dirty, printing will not be clear. The print head should be cleaned with a print head cleaner everyday before use, according to the following procedure: 1. Open the label cover and remove the label cassette. (See page 9-1) 2.
EM1-31064 18. TROUBLESHOOTING 18. TROUBLESHOOTING 18. TROUBLESHOOTING WARNING! This scale has been manufactured under strict quality control. If you have any trouble, however, DO NOT ATTEMPT TO FIX IT BY YOURSELF. Pull the power plug out of the outlet, and contact the TOSHIBA TEC Authorized Service representative. Problems Solution “----” is displayed at power on. Was the power turned ON when something was on the platter? → Make sure nothing is on the platter and turn the power on again.
E PRINTED IN SINGAPORE EM1-31064J
