Specification

4 5
OPERATION (cont.)CONTROL PANEL
USING YOUR TOASTER
1. Insert regular bread slice into the bread slot, which can be inserted with two slices at most each
time.
NOTE: Make sure the crumb tray is completely positioned in place before use.
2. Plug the power cord into the outlet.
3. Turn color control knob to your desired color. There are 7 color levels, the lowest “1” is for white
and the highest “7” is for dark. The middle “4” can toast the bread to golden color.
NOTE
a). Toasting color for one slice is darker than that for two bread slices at the same level.
b). If toasting continuously, toasting color for the latter bread is darker than that for the anterior bread
at the same level.
4. Lower carriage handle down vertically until it is latched in place, and the appliance will begin
toasting at once.
NOTE: Carriage handle can be latched only when the unit is plugged in.
5. Once the bread has been toasted to the preset color, the carriage handle will be automatically pop
up. Also you can uplift the carriage handle a little to remove the bread readily.
NOTE: During toasting, you may also observe the toasting color. If it is satisfactory, you can press the
Cancel button to cancel the operation at any time, but never lift carriage handle to cancel toasting.
CAUTION
1. If toaster starts to smoke, press “Cancel” button to stop toasting immediately.
2. Remove all protective wrappings prior to placing bread slice into toaster.
3. Avoid toasting the food with extremely runny ingredients such as butter.
4. Never attempt to remove bread jammed in the slots without unplugging the toaster from the electri-
cal outlet first, Be sure not to damage the internal mechanism or heating elements when removing
bread.
5. In order to achieve uniform color we recommend that you should wait minimum 30s between each
toasting so that color control can reset automatically.
6. The bread slot is only applicable for toasting regular bread.
OPERATION
BEFORE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element, usually it will emit
the odor for the first use. It is normal and will not occur after several times use, for the first use it is
suggested operating according to the below steps, except without bread, then let the toaster cool
down and begin toasting the first slice.