Full Product Manual

8. Place the cover (with the o-ring attached) over the top of the tank.

Fig. 8

9. Screw the lid onto the top of the tank. Make sure that it is secure,

or the filter will leak. Fig. 9

Fig. 9

10. Connect the UV clarifier plug into a properly grounded electrical

outlet. Fig. 10

Fig. 10

11. Wait several seconds for the light to turn on then check the

indicator light to verify if the light is functioning correctly.

Fig. 11

NOTE: This clarifier has a safety feature that only allows the UV

light to turn on if the lamp holder is fully seated into the

lamp housing.

Fig. 11

GFCI

Indicator light