Use and Care Manual

9. Connect the extension tubes to the diverter valve. Pay

attention to the markings on the ends of the diverter valve.

The end with the “P” connects to the pump. The end with the

“↑” points up, and connects to the fountain head. Fig. 9

NOTE: Tubes and diverter valve are NOT INCLUDED.

Fig. 9

10. For 1/2 in. tubing, connect the tubing onto the second output

of the diverter. Connect the other end of the tubing to a

spitter or other water feature. Fig. 10

NOTE: Tubing, diverter valve, and adapter are NOT

INCLUDED.

Fig. 10

11. Connect the fountain head to the top extension tube. Adjust

the diverter valve to split the flow between the fountain head

and the spitter. Fig. 11

NOTE: Fountain head kit is NOT INCLUDED.

Fig. 11

Extension tube

Diverter valve

1/2 in.

tubing

Fountain head

Diverter

valve

1/2 in.

tubing

Extension

tube

Connect

to spitter