Installation Guide

12
Controller Screen
On/Off button
OFF Screen
ON Screen
ON Screen
Purge button
Drains remaining water from
the pipes. ► See page 33.
Setting button
To change volume and other settings
► See page 28.
Activates the ON screen.
(The Purge button is off.)
ӿ Example: When the four lower buttons are all off.
ӿ Example: When the four lower buttons are all on.
Displays when the air blower but-
ton is on. ► See page 18.
Air blower mode setting button
Water temperature/level button
Displays when the fill tub button is on.
► See page 17.
HydroHands/shoulder-warmer mode settings
button
Displays when the HydroHands/shoulder-warmer
button is on.
► See page 19.
Underwater lighting
mode settings button
Displays when the under-
water lighting button is on.
► See page 20.
To adjust the temperature of the bath water
while bathing.
► See pages 21 and 22.
Hot/cold water buttons
Preference buttons
To start operating at your preferred
settings.
► See page 25.
Air Blower button
► See page 18.
► See page 19.
► See page 20.
► See page 17.
Activates the OFF screen.
HydroHands/shoulder-warmer button
Underwater lighting button
On/Off button
Fill tub button
ӿ These will not work if
there is no water in the tub.
Please run at least 13-
3/8” (34 cm) into the tub.