Installation Guide

18
Air blower operation
ӿ If the controller is not used, the system returns to auto after around one minute.
Fill the tub with water.
Press the to on.
Air will come out of the air jet cap.
Change the screen.
Press .
Description of operation Mode
 After starting operations 2 or 4, the system will automatically stop after approximately 15 minutes has expired.
 The time settings on the timer can be set to approximately 30 minutes. ► See page 28.
 When you want to stop the air blower, turn the
to off.
● The operating mode and bubble intensity settings are stored in memory.
Normal
►See page 17.
● Please operate with the On/Off button set to on.
Set the operating mode and bubble intensity.
Normal operation
Other operation
Bubble Intensity
5
4
3 (Initial setting)
2
1
Cannot be set
Cannot be set Pulsating
Oscillating
Runs at the bubble instensity settings.
The bubble intensity changes as follows: 5→4...→1→2...→5...
The bubble intensity changes as follows: 5→1→5→1→...