Installation Guide
19
Using HydroHands and shoulder-warmer water
Fill the tub with water.
Press the to on.
HydroHands and shoulder-warmer water come out from the ejection noz-
zle and the shoulder-warmer water outlets, respectively.
Set the operating mode (ejection/outlet nozzle).
►See page 17.
● Please operate with the On/Off button set to on.
The bathtub won’t function unless it has water in it. Fill the bathtub with hot water to Level 1 or more.
HydroHands and shoulder-warmer are operated at the same time. These functions cannot be
operated individually.
As lukewarm water in the piping comes out when the operation is started, it may feel cool at first. It is
also possible to set HydroHands/shoulder-warmer warm-up operation. ► See page 28.
Operating Mode
Two-sided ejection/outlet
(Initial setting)
One-sided ejection/outlet
One-sided ejection/outlet
After starting operations 2 or 3, the system will automatically stop after approximately 15 minutes has
expired.
The time settings on the timer can be set to approximately 30 minutes. ► See page 28.
When you want to stop HydroHands/shoulder-warmer water, press the
to off.
Operation