Manualshelf

Installation Guide

ManualsBrandsTOTO ManualsBathtubsTOTO Neorest 70-7/8" Acrylic Air Bathtub for Deck Mounted or Drop-In Installation with Center Drain
21222324252627282930
22
This adds hot water to raise the temperature of the bath water.
Raising the bath temperature (Heating water)
ӿ When the horizontal gauge (about 26 gallons or about 100 L) on the screen reaches the end, it will
stop automatically.
Switch screens.
Turn the Higher button to on.
The water will flow after about 10 seconds (but at most 20 seconds).
Press .
 This won’t work if the Lower button or the Higher button is on.
When the bath water has reached the desired temperature, turn off the
Higher button.
The water flow will stop after about 10 seconds.
 Please operate with the On/Off button set to on.
 This won’t work unless there is water in the tub. Put water in the tub. ► See page 17.
ӿ Turn this button off or check to see that it is
 Please press for one second.
Water that is 118°F/48°C will flow from the Fill-Tub outlet. Please be care-
ful of the high temperature.