Installation Guide

23
●The method is the same as for filling the bathtub. (► See page 17) Water at the preset temperature
will be added to the bathtub.
The amount of water in the tub after using the Fill-Tub feature will vary with the amount of starting water.
Adding more water (Add water)
The amount of water needed to reach the selected water level is calculated and
that amount of water is added to the bathtub.
ӿ
ӿ 26 gallons (100L) of water will be added to the bathtub when the amount of water to be added is calculated
at less than 26 gallons (100L).
When starting with less than 5-1/2” (14 cm) of water in the tub.
When starting with at least 5-1/2” (14 cm) of water in the tub.
The ending water level will be above the selected water level by the amount of
starting water.
Normal amount
Starting water
Starting water
Less than 5-1/2”
(14 cm)
Starting water
Tub filler
Tub filler
At least 5-1/2”
(14 cm)
The amount of water needed to reach
the selected water level is calculated.
Fill-tub feature ends
Fill-tub feature ends
Starting water
Starting water
Calculated amount
26 gallons (100L)
Less than 5-1/2” (14 cm)
of water in the bathtub
Water added by the normal
amount of the selected level
Fill-tub feature ends
Case 1: The calculated
amount of water is at
least 26 gallons (100L).
Case 2: The calculated
amount of water is less
than 26 gallons (100L).
►
►
Operation