Installation Guide
24
Adding more water (Add water) continued
ӿ When the selected water level has been reached there will be music and the filling will stop auto-
matically.
Press the to on.
If changing the Fill-Tub temperature or water level, please do so.
Press .
When the desired water level has been reached turn the off.
The water flow will stop after about 10 seconds.
Please operate with the On/Off button set to on.
After about 10 seconds (but at most 20 seconds), water will flow from
the fill-tub outlet.
Put water in the tub. ► See page 17.
ӿ The controller will automatically go back after about one minute without operation.