Installation Guide

25
ӿ When the settings have been configured, the display colors of the numeral on the preference
button will be reversed.
Put water in the bathtub.
With water in the bathtub, press one of the three preference buttons.
When you have configured your preferred settings, press the Set button
and the settings will be complete.
Operating the air blower, Hydro Hands / shoulder-warmer water, or under-
water lighting at your preference settings.
 In this example we press preference button 1.
This preference buttons can be set to your preferred operations (air blower, Hydro Hands / shoulder-
warmer water, underwater lighting). Up to three patterns can be set using the preference buttons.
Using the preference buttons
Operation
► See page 17.
Configuring the settings
 Please operate with the On/Off button set to on.
 This won’t work unless there is water in the bathtub. Please have at least 13-3/8” (34 cm) of water in
the bathtub.
 When the preference button does not display, please set all four of the lower buttons to off.
 Settings are stored.
 Operating the air blower ► See page 18.
 Operating Hydro Hands / shoulder-warmer water ► See page 19.
 Operating the underwater lighting ► See page 20.