Installation Guide

26
Using the preference buttons (continued)
Put water in the bathtub.
Press one of the three configured (numeral display colors reversed) pref-
erence buttons (1~3) and begin operation.
To end operation with the preference button, press the again.
 In this example we press preference button 1.
► See page 17.
Configuring the settings (continued)
 Please operate with the On/Off button set to on.
 This won’t work unless there is water in the bathtub. Please have at least 13-3/8” (34 cm) of water in
the bathtub.
 When the preference button does not display, please set all four of the lower buttons to off.
Operation using the preference buttons
To end operation with the preference button press the .
 After approximately 15 minutes the air blower, Hydro Hands / shoulder-warmer water or underwater
lighting will turn off automatically.
To restart, please turn one of the on.
 The timer can be set for up to about 30 minutes. ► See page 28.
Put water in the bathtub.
► See page 17.
Changing or deleting the settings