Installation Guide

Using the preference buttons (continued)

Press one of the three configured (numeral display colors reversed) pref-

erence buttons (1~3) and begin operation.

 In this example we press preference button 1.

Changing or deleting the settings (continued)

Operating the air blower, Hydro Hands / shoulder-warmer water or un-

derwater lighting at your preferred settings.

To end operation with the preference button, press the or

for operation.

 Please operate with the On/Off button set to on.

 This won’t work unless there is water in the bathtub. Please have at least 13-3/8” (34 cm) of water in

the bathtub.

 When the preference button does not display, please set all four of the lower buttons to off.

 Operating the air blower ► See page 18.

 Operating Hydro Hands / shoulder-warmer water ► See page 19.

 Operating the underwater lighting ► See page 20.

The three lower buttons are turned off when these settings are cancelled.

ӿ When the settings have been configured, the display colors of the numeral on the preference

button will be reversed.

When you have configured your preferred settings, press the Set button

and the settings will be complete.

 Settings are stored.

Operation