Installation Guide

30
Cleaning the NEOREST
Running the water
The shower is stored in the outlet module that fills the tub.
Open the lid on top of the tub filling outlet.
Pull out the shower hose.
Turn the cold water side knob counterclockwise.
Turn the hot water knob counterclockwise and ad-
just the water flow and temperature.
●Please do not use undue force. Otherwise, leaks or damage could
result.
●Starting with the hot water will result in only hot water coming out,
which could cause scalding.
Turning off the shower
Be sure to start with the hot water and turn the
knob clockwise.
Turn the cold water knob clockwise.
Reinsert the shower hose.
Close the lid.
●After cleaning the tub, please press the Purge button on the controller and drain
the water. ► See page 33.
ӿ Please be careful not to pinch your fingers.
ӿ Caution: Do not insert the shower head downward. It may be
damaged.
ӿ Starting with the cold water would leave just the hot water run-
ning, which could cause scalding.
ӿ Please turn the knob slowly. Turning it off rapidly can cause a loud “boom” (water hammer),
which will impact the plumbing fixtures and could lead to leaks and water damage.
Cleaning the tub