Specification Sheet

#SS-00999, v.01
Printed in U.S.A. | © TOTO LTD. 07/12 | Printed on recycled paper ♻
Ph: [phone] | Fax: [phone] | www.totousa.com
These dimensions and specifi cations are subject to change without notice
ABA991X#01FCP
Neorest
®
Air Bath
™
SE
SPECIFICATIONS
• Size 70-7/8"L x 55-1/8"W x
30-1/8"H
• Warranty Three Year Limited Warranty
• Material Acrylic tub, brass faucets
• Shipping Weight 883 lbs.
• Shipping Dimensions 59-1/2"L x 96"W x 38-1/4"H
70 7/8" [1800mm]
55 1/8" [1400mm]
9 13/16" [250mm]
3 1/8" [80mm]
30 1/8" [765mm]
35 7/16" [900mm]
9 11/16" [246mm]
INSTALLATION NOTES
Refer to the Installation Manual for instructions.
Supply Equipment Specifi cations:
• Supply pressure 29-108.75psi (0.20-0.75 MPa)
• Supply temperature 140º-158ºF (60º-70ºC)
• Hot water usage:
Max. temperature 113ºF (45ºC)
Max. fl ow rate 9.2 gal/min (35L/min)
Max. capacity 151 gal (570L)
• Hot/Cold water inlet and Fill Air Bath outlet are NPT 3/4.
A tankless water heater is recommended. Hot water supply
should be 75% of capacity or greater. Actual hot water
needed will depend upon total system needs.
Floor support under bath must provide a minimum of 85 lbs/
square foot (415 kg/square meter) loading.