Installation

9
ENGLISH
WARNING!
DO NOT USE IN-TANK BOWLCLEANERS.
The use of high concentration of chlorine or chlorine-related products can seriously
damage fittings in the tank. This damage can cause leakage and property damage.
TOTO
®
shall not be responsible or liable for any tank fitting failure or damage caused
by the use of in-tank bowl cleaners.
CARE AND CLEANING
Flush Tower
Drain Valve
Refill Tube
ill. 1
ill. 2
1) Shut off the water supply.
2) Flush the toilet to remove the water inside the
tank.
3) Remove the tank lid and place somewhere safe.
NOTE: Before removing anything from the tank,
note the placement of the drain valve, chain and
refill tube.
4) Unhook the refill tube from the overow tube of
the drain valve.
5) Unhook the chain from the trip lever.
6) Uninstall the tank (refer to the toilet installation
manual).
7) Remove the drain valve body from the tank.
8) Replace the drain valve in the same position as
the former drain valve.
9) Hand tighten the mounting nut of the drain valve
and use a wrench to tighten another 3/4 turn.
10) Reinstall the tank onto the bowl and place the
chain and refill tube the same way as it was for
the former drain valve.
11) Turn the water supply back.
12) Check for any leakage after the tank has been
filled.
MAINTENANCE INSTRUCTIONS
Replacing the Drain Valve