Owners Manual: MS990CGR (Instruction Manual)

ManualsBrandsToto ManualsPlumbingMS990CGR#01 Toilet & Washlet Unit

1155 Southern Road

Morrow, GA 30260

(770) 282 8686

For your safety, be sure to inspect your Neorest 600 occasionally.

● Is the power plug abnormally hot?

● Is the power plug covered with dust?

● Is the outlet loose?

● Is your Neorest 600 operating differently than usual?

* In case anything is abnormal, contact TOTO USA to prevent a fire or an electrical shock.

0GU9001R

2005.2.25

D06776-3

NEOREST 600

MS990CGR

Instruction Manual

✲ Thank you for your recent purchase of the TOTO Neorest.

Please read the enclosed information to ensure the safe

use of your product.

Important Safety Instructions ..........

Operational Instructions ..................

Tips for Using the NEOREST 600

....

Performance Features ....................

Parts and Features .........................

Before Using the NEOREST 600....

Introduction

How to Use the NEOREST 600......

For Best Results .............................

●

Adjusting the Temperature ..............

●

Deodorizing .....................................

●

Opening and Closing the Toilet

Seat and Lid....................................

●

Flushing...........................................

To Conserve Energy .......................

●

Using the Energy Saver Feature -

“TIMER ON/OFF”............................

●

Shutting Off Energy Saver

Feature - “TIMER ON/OFF” ............

●

Using the Energy Saver - “AUTO

ON/OFF” .........................................

●

Shutting Off the Energy Saver

Feature - “AUTO ON/OFF” .............

●

If You Are Using the “TIMER

ON/OFF" and the “AUTO ON/OFF”

Features at the Same Time ............

Operation

Caring for your NEOREST..............

●

Before Cleaning the NEOREST......

●

Daily Care and Maintenance ..........

●

Thorough Cleaning of the Product..

●

Other Care and Maintenance .........

Maintenance

Preventing Damage Due to

Frozen Water Pipes

...........................

●

How to Prevent Damage (Pipe

Drain Method)

..............................

Troubleshooting .................................

Specifications .....................................

Limited Warranty ...............................

Troubleshooting

Summary of content (24 pages)

PAGE 1
Instruction Manual NEOREST 600 MS990CGR 1155 Southern Road Morrow, GA 30260 (770) 282 8686 Introduction Important Safety Instructions .......... 2 Operational Instructions .................. 5 Tips for Using the NEOREST 600.... 6 Performance Features .................... 7 Parts and Features ......................... 9 Before Using the NEOREST 600.... 11 How to Use the NEOREST 600...... 13 For Best Results ............................. 15 the Temperature .............. 15 Deodorizing ...................
PAGE 2
Important Safety Instructions When using electrical products, especially when children are present, basic safety precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING DANGER Possible malfunctions: ● ● 8. 9. 10. 11. 12. 2 Water leaks from either the main unit or the water pipes. The product makes a strange noise or emits a strange odor. ● ● ● The product feels extremely hot. The product is cracked or broken. The product is smoking.
PAGE 3
WARNING Operational Instructions To reduce the risk of burns, electrocution, fire or injury to persons: 17. Always use the NEOREST at a room temperature of 32°F (freezing temperature) or above to prevent frozen pipes and hoses. ● Frozen water pipes will cause the toilet and the pipes to break resulting in water leakage. Refer to Page 38 for instructions on how to prevent frozen pipes. Always follow these precautions to ensure the safe use of your product.
PAGE 4
Performance Features Tips for Using the NEOREST 600 Protect the environment and reduce the use of electricity. Use the timer and save energy. Use the Auto Energy Saver to automatically reduce the toilet seat temperature when the toilet is not being used. See page 25.
PAGE 5
Energy Saving Features Timer ON/OFF Auto ON/OFF ON/OFF Button ● ● ● Conserve energy by pre-setting the timer to turn off the toilet seat heater for the same time period each day.(Can be set for 3, 6 or 9 hour periods of time). Parts and Features Page 23, 24 Lid anti-bacterial Remote controller The unit memorizes the time of day at which the toilet is least used and automatically reduces the toilet seat temperature to conserve energy.
PAGE 6
Before Using the NEOREST 600 Remote Controller Front Preparations Pulsating Wash On/Off Button Oscillating Wash On/Off Button (See Page 13) Insert batteries into the remote controller. Remote Control Flush Button (See Page 20) Dead Battery Warning LED (See Page 11) Dryer Button (See Page 14) ➀ Remove the remote control from the wall hanger. ● Grasp the sides of the remote with both hands and lift straight up.
PAGE 7
How to Use the NEOREST 600 Insert the plug into the wall outlet. ● Connect the power cord to a 120V (60 Hz) GFCI protected power outlet. When you stand at a distance of approximately 1 foot from the front of the Neorest, the lid will automatically open. (Auto Open/Close, See page 17,18) Sit on the seat Open the water shutoff valve. ● Use the wrench provided or a flat head screwdriver to open the water shutoff valve. Functions become available when the seat sensor is activated.
PAGE 8
For Best Results Dryer Dryer Button Warm air dries wet areas. Adjusting the Temperature Wipe excess water away with toilet paper for faster drying. ● 1 Stop Button Turns the dryer off. ● Stand up from the toilet seat ● Use the remote controller to adjust the water temperature, toilet seat temperature or dryer heat to the desired setting. See page 11, if you have installed the theft prevention mounting blocks. Wall Hanger The Deodorizer is automatically shut off after 1 minute.
PAGE 9
Deodorizing Opening and Closing the Toilet Seat and Lid There are two ways to open and close the toilet seat and lid. The remote control method and the automatic method. 1 Sit on the toilet seat Remote Controlled Opening/Closing of Toilet Seat and Lid The deodorizer function automatically starts. ● (lights up) controller. The “DEODORIZER” light on the main unit display lights up.
PAGE 10
1 Stand in front of the toilet. When Standing in Front of the Toilet Motion detection sensor ● The Lid automatically opens Raise the toilet seat with the remote controller. You must stand in front of the toilet for at least 6 seconds or the lid will not automatically close. After using the toilet, move at least 1 foot away from the toilet. If the lid does not open, move at least 1 foot away from the toilet, wait 10 seconds, and then stand in front of the toilet again.
PAGE 11
Automatic Flushing Flushing ● The toilet will automatically flush when the user moves away from the toilet. (This function prevents the There are 2 settings for flushing water. The remote controlled setting and the auto setting. toilet bowl from being left unflushed.) Confirm that the Auto Flush display on the back of the remote controller is "On". Remote Controlled Flushing ● The toilet can be flushed by pushing the flush button on the remote controller. 1 [ ] indicates Auto Flush is "On".
PAGE 12
To Conserve Energy When standing in front of the toilet ● You must stand in front of the toilet for at least 6 seconds in order to activate the automatic flush function. Using the Energy Saver Feature - “TIMER ON/OFF” You can set your Neorest to turn off the seat heater to save energy by pressing the “TIMER ON/OFF” button. The heater turns off for 3, 6 or 9 hours to save energy. Each day afterwards, the Neorest automatically goes into Energy Saver mode at the same time. 1.2 Gallon light flush (4.
PAGE 13
* Example When you want to save energy for 6 hours between 0:00 a.m. and 6:00 a.m. (while your family is sleeping), press the “Timer” button at midnight. ● The energy saving starts automatically at the same time and duration on every following day. Using the Energy Saver - “AUTO ON/OFF” The Neorest can be set to remember the times of day that you normally use the toilet, and will automatically lower the temperature of the toilet seat to save energy when you do not expect to use the toilet.
PAGE 14
Notes Shutting Off the Energy Saver Feature - “AUTO ON/OFF” Precaution concerning the Energy Saver: ● It takes the Neorest two or three days to establish during which time periods the toilet is not used often. During that time, the energy-saving mode will go into effect gradually. When replacing the batteries of the remote control: ● Press the Energy Saver button on the remote controller. ● ● The energy-saving settings will disappear and must be re-entered.
PAGE 15
If You Are Using the “TIMER ON/OFF” and the “AUTO ON/OFF” Features at the Same Time Caring for your NEOREST 600 Before Cleaning the NEOREST Press the “TIMER ON/OFF” button on the remote controller when you want to begin saving energy. Note: For more details, see “TIMER ON/OFF” on page 23. Each component can be disassembled for a thorough cleaning. Caution! Next, press the “AUTO ON/OFF” button. (See note.) Be sure to turn off the Auto Lid OPEN/CLOSE and Auto Flush buttons before cleaning the unit.
PAGE 16
Daily Care and Maintenance Thorough Cleaning of the Product Cleaning the main unit, toilet seat and lid. Cleaning the main unit, toilet seat and lid. ● Each component can be disassembled for a thorough cleaning. Wipe the components with a soft damp cloth. ● Wet and wring out a soft cloth for wiping the surface of the components. 1, 2 Remove the lid. ● Open the lid at a 90° angle, grasp with both hands and lift straight up. Approximately 90˚ Cleaning very dirty components.
PAGE 17
Cleaning the deodorizer filter. Reattach the toilet seat ● ● ● ✲ ✲ (Filter should be cleaned once a month.) Grasp the toilet seat with both hands, making sure to keep the black line on the seat cord straight. Insert the toilet seat straight into the seat pins. Lower the toilet seat. Be careful not to get the seat cord twisted when installing the toilet seat. Do not install the seat at an angle or use force when pushing down on it.
PAGE 18
Other Care and Maintenance Remove the water supply filter ● Remove the filter cover with the wrench. The filter will come out with the filter cover. ● Cleaning and inspecting the power plug. Water supply filter ● Filter Filter cover Water shutoff valve unit Check the power plug once a month to make sure that it is in proper working condition. Wrench Remove the power plug.
PAGE 19
Cleaning the wand. ● Cleaning the toilet bowl. ● The toilet bowl can easily be cleaned while flushing with water. Perform routine cleaning of the toilet bowl. ✲ Be careful not to get toilet bowl cleaner on the plastic components. The wand can be cleaned without spraying warm water. Extend the wand. Clean the toilet bowl with toilet bowl cleaner before pushing the "Rinse Cycle" button. Push the "Wand Cleaning" button on the remote controller. ● ● 1 The wand comes out.
PAGE 20
Preventing Damage Due to Frozen Water Pipes Troubleshooting During cold months, or when there is a risk of frozen water pipes, follow the steps below to prevent the pipes and hoses from freezing, which could cause damage to the components and result in water leakage. WARNING How to Prevent Damage (Pipe Drain Method) ● The water in the toilet bowl and Washlet unit are automatically drained at fixed intervals to prevent the pipes and hose from freezing.
PAGE 21
Deodorizer Rear Wash · Front Wash (Continued) Problem Possible Cause Water sprays into the toilet bowl from the wand for a few seconds when sitting on the toilet seat When the toilet seat sensor is enabled, a small amount of water is discharged before warm water is sprayed from the wand. Also, changing your position while seated on the toilet will cause the toilet seat sensor to turn ON or OFF and a small amount of water may discharge from the wand area. This is not due to a malfunction.
PAGE 22
Auto OPEN/CLOSE Problem The lid will not automatically open and close. Remote Controller Possible Cause Is the Auto OPEN/CLOSE function OFF? When it is OFF, the Auto OPEN/CLOSE will not be display. Push the "Auto" function of the seat and lid OPEN/CLOSE on the remote controller to turn it ON. (See page 17, 18.) Is the sensor light on the main control display ON?Are you facing the toilet when standing in front of it? Stand facing the toilet. (See page 17, 18.
PAGE 23
Toilet Seat Sensor Auto Flush (Continued) Problem Possible Cause Even when not seated on the toilet seat, the "Rear Wash", "Air deodorizer" and "Warm Air Dryer" functions turn on when the buttons are pushed. Is the toilet seat sensor covered with something? Even when seated on the toilet seat, the "Rear Wash", "Air deodorizer" and "Warm Air Dryer" functions do not turn on when the buttons are pushed. Or, the "Auto Open/ Close" and the "Auto Flush" fail to operate.
PAGE 24
Limited Warranty Specifications Item Contents 120 V AC, 60 Hz 1288 W Average Power Consumption per Hour *1 21 Wh Cord Length 3 feet Toilet Bowl Functions Power Power Usage Flush Volume 1.6 Gallons per Flush (6.0 LPF) with alternate 1.2 Gallon light flush (4.5 LPF) Water supply system Direct connection to city water tap Flush Type "Cyclone" Siphon jet Bowl Style Elongated Freeze proofing Flushing system Flushing volume 40 L/h Washlet Rear 9-14.