Instruction Manual WASHLET C100 SW2034 (TCF6631U) SW2033 (TCF6630U) A100 SW2014 (TCF6601U) ■ Thank you for your recent purchase of the product. Please read the enclosed information to ensure the safe use of your product. ■ Be sure to read this Instruction Manual before using your product and keep it in a safe place for future reference.
The available functions vary according to the model. Check your model name and write a check mark in this field as needed. Product name (Model) Part No. Functions Cleansing Basic Functions Changing the washing method Drying Functions Convenient Functions SW2033 SW2014 Ref.
Safety Precautions .................... 4 Operational Precautions.......... 11 Parts Names ........................... 12 Preparation.............................. 14 DEODORIZER, PRE-MIST Product name, Part No. Temperature Adjustment.......... 18 Energy Saver Feature ............. 20 Maintenance Power Plug .............................. 24 Main unit .................................. 25 Deodorizing Filter .................... 25 Gap between the Main Unit and the Toilet Bowl ..................
Safety Precautions These precautions are important for safe usage. Be sure to follow them and use the product correctly. Symbols and Meanings WARNING May result in death or serious injury. CAUTION May result in injury or property damage. The following symbols are used to indicate important safety instructions for the use of the product. Symbol Meaning This symbol indicates a prohibited use of the product. This symbol is used to indicate a required step in the use of this product.
Do not use the Washlet if a malfunction occurs. Always unplug the plug from the outlet. Close the water shutoff valve to stop water supply. Introduction WARNING Possible malfunctions: Water is leaking from a pipe or the main unit. The product is cracked or broken. The product makes a strange noise or emits a strange odor. The product emits smoke. The product is abnormally hot. The toilet seat cushion is out of place.
Safety Precautions (Continued) WARNING Beware of irritation or burn. Improper use of the toilet seat may cause irritation or burn. When sitting for a long time on the toilet seat, switch the toilet seat temperature adjustment to "OFF". When any of the following persons use a heated seat or warm air drying, someone should switch the toilet seat temperature adjustment to "OFF" and switch the drying air temperature to "Low".
Preliminary studies in females suggest that overuse of continuous spraying can increase the possibility of vaginal mucosa drying and potential reduction in desirable microbial organisms. Although these studies have not been validated, please consult your healthcare provider for concerns regarding whether these circumstances may apply to you.
Safety Precautions (Continued) CAUTION To prevent a sudden water leak, do not remove the water filter drain valve when the shutoff valve is open. Doing so will cause water to spurt out. (Refer to Page 29 for instructions on cleaning the water filter drain valve.) Do not fold or crush the water supply hose; do not damage by cutting with a sharp object. Doing so may cause water leaks. Do not install the base plate, which is not attached. Doing so could cause a fire or damage.
1. Do not use while bathing. 2. Do not place or store the product where it can fall or be pulled into a tub or sink. Introduction DANGER To reduce the risk of electrocution: 3. Do not place in or drop into water or other liquid. 4. Do not reach for the product when it has fallen into water. Unplug it immediately. WARNING To reduce the risk of burns, electrocution, fire or injury to persons: 1. Close supervision is necessary when this product is used by, on, or near children or invalids. 2.
Safety Precautions (Continued) Grounding Instructions This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electrical current. The plug must be plugged into an outlet that is properly installed and grounded. DANGER - Improper use of the grounding plug can result in a risk of electric shock.
Operational Precautions ■ For prevention of malfunctions ● When you sit on the toilet seat, the seat switch turns ON, enabling you to use various features. (A click sound is heard when the seat switch is ACTIVATED.) ● Wipe plastic areas such as the main unit and control panel with a soft, wet cloth. ● Do not lean against the toilet lid.
Parts Names Toilet lid cushion Product name, part no., etc. Toilet lid Seat switch (Built-in) Warm air outlet cover * Water supply hose Wand cover Power plug Wand (Page.14) Shutoff valve (Page.14) Power cord 12 Control panel (Page.
Introduction Right side of main unit Deodorizer outlet * Main unit removal button (Page.26) Deodorizing filter * (Page.25) Toilet seat cushions Left side of main unit SW2033 Water filter drain valve (Page 29) Water drain plug (Page 35) * Except SW2014 The toilet seat and lid shape varies by model. Descriptions in this manual are based on the illustrations of SW2034.
Preparation Using the Product for the First Time 1.Turn on the power 1 2 Insert the power plug. The wand extends and then retracts. 2.Open the shutoff valve 1 Fully open the shutoff valve. Check that the POWER LED on the main display is lit up.
Basic Operations Washes your rear with mild water pressure. [FRONT] Serves as a bidet for ladies. Operation Drying [OSCILLATING] When you press this button again during use, the wand moves back and forth to wash your rear thoroughly. [DRYER]* Dries your rear. Stopping [STOP] Temperature adjustment button (Page 18) • Adjust temperatures ● Functions that operate when a button is pressed during "REAR", "SOFT REAR" or "FRONT" cleansing. Introduction Cleansing [REAR] Cleanses your rear.
Automatic Functions Cleaning Features As you approach As you sit DEODORIZER As you stand up* Deodorizer stops ➝It stops after about 2 minutes (SW2034, SW2033 only) Starts the deodorizer A mist is sprayed inside the toilet bowl to make it more difficult for dirt to adhere PRE-MIST (SW2034, SW2033 only) A mist is sprayed inside the toilet bowl * To sanitize the toilet bowl every time it is used, water remaining in the wand is drained after you stand up from the toilet seat.
Operation Note Changing settings If dirt adheres... ■ If dirt adheres to the wand during use, you can extend the wand to clean it. ●Cleaning the wand (Page 28) DEODORIZER ON/OFF (Page 32) • The pre-mist will not spray for about 90 seconds after you stand up from the toilet seat.
Temperature Adjustment Warm Water / Toilet Seat / Drying * Three different temperature levels (high / medium / low) and "OFF" setting can be made.
Operation When "OFF" OFF To turn the warm water temperature and toilet seat temperature "OFF" *The "DRYER" cannot be turned "OFF". 1 2 Select a temperature button you want to turn "OFF" from · and press it. • The current temperature level appears. 1 Press the button selected in step repeatedly until the temperature level is set to "OFF".
Energy Saver Feature You can save energy by turning the toilet seat heater to a low temperature (or turning the heater "OFF") during periods when the toilet will be used infrequently. It takes about 10 days for the product to determine the periods when it is used relatively less frequently.
When energy saver is in operation Toilet seat Warm water heater heater AM 0 6 8 5 9 0 Lit (Orange) Set temperature*1 Low Set temperature*1 OFF Set temperature*1 Low temperature*2 Operation Example) Time period with infrequent use (from 9:00PM to 6:00AM): Low Time period the toilet is never used (8:00AM to 5:00PM): OFF Time period with infrequent use Lit PM Low temperature*2 Time period the toilet is never used Lit (Orange) OFF *3 OFF OFF OFF *1 The temperature set on Page 18.
Energy Saver Feature How to set ENERGY SAVER Lit (Orange) The ENERGY SAVER LED will be lit if the energy saver feature is working.
Energy-saver setting button Press .
Maintenance Power plug (Perform monthly) WARNING Always disconnect the power plug from the outlet before cleaning, maintenance or inspection. (see left) (Failure to do so may cause electric shock or malfunction, resulting in a breakdown.) Dry cloth 1 Wet cloth Disconnect the power plug and wipe it with a dry cloth. *For safety, disconnect the power plug before cleaning or maintenance. 2 Insert the power plug. The POWER LED lights up.
Main Unit (Perform daily) Deodorizing filter (Perform monthly) (SW2034, SW2033 only) Soft cloth soaked in water 1 2 • Toilet paper • Dry cloth • Nylon scrubbing pads (May cause damage.) 2 Remove the deodorizing filter. Hold the knob and pull outward. Do not pull with undue force. (May cause damage or malfunctions) Unplug the power plug. Wipe with a soft cloth that has been soaked in water and wrung-out thoroughly.
Maintenance Gap between the Main Unit and Toilet Bowl (Perform monthly) You can remove the main unit to clean the top of the toilet bowl and the bottom of the main unit. Soft cloth soaked in water 1 Unplug the power plug. 2 Remove the main unit. Toilet paper, etc. (May cause damage.) If the power is not unplugged, the unit may malfunction or cause a failure or electric shock. • Do not pull the unit with undue force (because the water supply hose and power cord are attached).
Gap between the Main Unit and the Toilet Lid (Perform monthly) The toilet lid can be removed for thorough cleaning. Soft cloth soaked in water 1 Unplug the power plug. 2 Remove the toilet lid. Toilet paper, etc. (May cause damage.) Removing and Reinstalling Hold with both hands :Pull the left side outward. B :Disconnect the right side. 3 Wipe with a soft cloth that has been soaked in water and wrung-out thoroughly. 4 Reinstall the toilet lid. :Join the pin and the hinge on the right side.
Maintenance Wand (Perform monthly) If you notice dirt Soft cloth soaked in water Wand Water filter drain valve 28 Toilet paper, etc. (May cause damage.) 1 Press 2 Wipe with a soft, wet cloth. 3 Press . The wand extends and water sprays out for cleaning. The wand automatically retracts after about 5 minutes. Do not pull, push or press the wand with excessive force. (May cause damage or malfunction.) The wand retracts. .
Water filter drain valve (Perform once every 6 months) 1 Close the shutoff valve. The water supply stops. CAUTION Do not remove the water filter drain valve while the shutoff valve is open. Shutoff valve (Otherwise, water may leak out) 2 Press press to extend the wand, and then again to return the wand. (Release the pressure from the water supply pipe.) Maintenance 3 4 Unplug the power plug. Remove the water filter drain valve.
Changing Settings Setting List To change the settings, check that all LEDs on the control panel are flashing! Setting Types PRE-MIST AUTO FUNCTIONS CLEANING DEODORIZER Note • If you do not press a next button within about 60 seconds after the LED flashes, the flashing LED will be disabled. If you fail to complete the setting, redo from the beginning.
All LEDs on the control panel flash. Press about 10 seconds or longer Settings cannot be changed unless all LEDs flash Available Settings* Applicable Models Set whether or not to spray mist automatically after sitting on the toilet seat ON/OFF SW2034 SW2033 Set whether or not to deodorize automatically after sitting on the toilet seat Setting Ref. Page Page 32 ON/OFF *The black text is the initial setting.
Changing Settings CLEANING Set whether or not to spray mist automatically after sitting on the toilet seat 1 PRE-MIST Press until all LEDs on the control panel start flashing (about 10 seconds) (SW2034, SW2033 only) Set whether or not to deodorize automatically after sitting on the toilet seat DEODORIZER (SW2034, SW2033 only) 32
FRONT button STOP button 2 Press at the same time. 2 All LEDs flash The setting changes each time the button is pressed and Press SEAT button WAND CLEANING button ON Flickering (Orenge) OFF OFF The setting changes each time the button is pressed . ON Flickering (Green) OFF 3 Press .
What to Do? Freeze Damage Prevention When the ambient temperature is likely to drop to 0°C (32°F) or lower, take measures to prevent freezing. Attention! ●When the ambient temperature is likely to drop to 0°C (32°F) or lower, do not use the energy saver feature. (May damage the product.) ● Warm the bathroom or take measures against freezing so that the ambient temperature does not drop below 0°C (32°F). Freeze damage prevention 1 Close the shutoff valve. (4)Drain the water from the water supply hose.
Long Periods of Disuse If the toilet is in a location you will not visit for a long time, drain the water. (The water in the tank may become contaminated and cause skin irritation or other problems.) How to drain the water 1 Drain the water from the toilet tank. (Step 1 2 on Page 34) 2 Drain the pipe. (Step 3 (1) to (5) on Page 34) 3 Remove the water drain plug. • The water comes out from near the wand for about 90 seconds. 4 Reinstall the water drain plug.
Troubleshooting First, try the actions described on pages 36 to 39.If the problem persists, consult the installer, seller or the contact listed on the back cover of this manual. CAUTION If a water leak occurs, close the shutoff valve. Shutoff valve Please check first Is the POWER LED lit? ■ SW2034·SW2033 Is the POWER LED flickering? ➞The main unit is not mounted properly. Mount the main unit again.
Rear and Rear soft, front cleansing, wand Please check Ref. Page ● When the temperature is low, it takes time for the wand to come out after the control panel button is pressed because the water must be warmed up first. - ● Did you sit on the toilet continuously for 2 hours or longer? (If so, operation is stopped for safety purposes.) ➞Stand up from the seat and then use again.
Troubleshooting Warm air drying (SW2034, SW2033 only) Trouble Please check The dryer temperature is low ● Is the control panel preset temperature set to a low level? Stops in the middle of use ● The feature stops automatically after 10 minutes of continuous use. ● Does the seat switch have difficulty detecting? ➞ Sit back on the toilet seat. If you get up slightly from the seat, or sit forward on the seat, the seating switch may temporarily stop detecting your presence. Ref.
Deodorizer (SW2034, SW2033 only) Trouble The deodorizer seems to be not working A strange odor is emitted Ref. Page Please check ● Is "DEODORIZER" set to "OFF"? ➞Set to "ON". ● Even after sitting down, you do not hear operation sounds. ➞Sit back on the toilet seat. ● If you hear an operation sound when you sit on the toilet seat. ➞Clean the deodorizing filter.
Specifications SW2034 Item Rated power supply AC 120 V 60 Hz Rated power consumption 406 W Type of water heater 1.2 m (3.93 ft) Water protection level Rear cleansing Spray volume Rear soft cleansing Front cleansing Water temperature Toilet tank capacity Heater capacity Safety device Backflow prevention device Warm air temperature* Functions Warm air dryer Airflow volume Heater capacity Safety device Heated seat Surface temperature Heater capacity IPX4 Approx. 0.27 to 0.43 L/min. (Approx. 0.
Limited Warranty 1. TOTO warrants its washlet series ("Washlet") to be free from defects in materials and workmanship during normal use when properly installed and serviced, for a period of one (1) year from date of purchase. This limited warranty is extended only to the ORIGINAL PURCHASER of the Product and is not transferable to any third party, including but not limited to any subsequent purchaser or owner of the Product.
Reference 43
TOTO U.S.A., Inc. 1155 Southern Road Morrow, GA 30260 Phone : (770) 282 8686 Warranty Registration and Inquiry For product warranty registration, TOTO U.S.A. Inc. recommends On-Line Warranty Registration. Please visit our web site http://www.totousa.com. If you have questions regarding warranty policy or coverage, please contact TOTO U.S.A. Inc., Customer Service Department, 1155 Southern Road, Morrow, GA 30260 (888) 295 - 8134 or (678) 466 - 1300 when calling from outside of U.S.A.