05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS SECTION I BASIC FUNCTIONS Basic information before operation Display operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Touch switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Inputting letters and numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Current position display . . . . . .
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS Display operation CAUTION Take care not to jam your hand while the display is moving. Otherwise, you could be injured. 1U009 NOTICE Do not obstruct the display while it is moving. It could damage your navigation system. You can adjust the angle of the display by pushing the “TILT” button. Each push of the “TILT” button will tilt the display to positions 1 , 2 , 3 and then back to 0 in the reverse order.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS Inputting letters and numbers To input numerals and symbols When searching for an address or a name, or entering a memo, you can input letters and numbers via the touch screen. To input letters To display the alphabet keys, touch the To display the number keys and symbol keys, touch the “0-9” switch. “A-Z” switch or the “ To display the list ” switch. Enter numerals and symbols by touching the number keys and symbol keys directly.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS List screen operation When a list is displayed, you can scroll or page through the list by using the appropriate switch. If appears to the right of the item name, the complete name is too long for the display. Touch to scroll to the end of the name. Touch to scroll to the beginning of the name. INFORMATION The number of matching items is shown to the right side of the screen.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS Current position display When starting the navigation system, the current position is displayed first. This screen displays the current vehicle position and a map of the surrounding local area. The current position is automatically set as your vehicle receives signals from the GPS (Global Positioning System). If your current position is not correct, it is automatically corrected after your vehicle receives signals from the GPS.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS After you scroll the screen, the map remains centered at the selected location until you activate another function. The current vehicle position mark will continue to move along your actual route and may move off the screen. When you push the “MAP/ VOICE” button, the current vehicle position mark returns to the center of the screen and the map moves as you proceed along the designated route.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS To see information about the icon Touch the “Info.” switch. where the cursor is set The registered point is shown by on the map. To change the icon or name, etc., see page 68. You can register up to 106 memory points. If you attempt to register more than 106, a message appears for confirmation. To display information about an icon, set the cursor on it. POI INFORMATION When the cursor is set on a POI icon, the name and “Info.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS INFORMATION The desired Point of Interest can be displayed on the map screen. (For details, see page 49.) MEMORY POINT INFORMATION When the cursor is set on a memory point icon, the name and “Info.” switch are displayed on the top of screen. Touch the “Info.” switch. Information such as the name, location, and phone number are displayed. If you touch the “Enter ” switch, the position of cursor is set as a destination.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS Map scale INFORMATION Orientation of the map When the map scale is at the maximum range of 250 miles (400 km), is not shown. When the map scale is at the minimum range of 150 feet (50 m), is not shown. However, in the area where the foot print map is contained, when the map scale is changed to 150 feet (50 m), the switch changes to the switch. Touch the or switch to change the scale of the map display.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS You can change the orientation of the map from north-up to heading-up by touching the orientation symbol at the top left of the screen. North-up symbol Regardless of the direction of vehicle travel, North is always up. Heading-up symbol The direction of vehicle travel is always up. A red arrow indicates North.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS Even when the navigation system is receiving clear GPS signals, the vehicle position may not be shown accurately or inappropriate route guidance may occur in some cases. (a) Accurate current vehicle position may not be shown in the following cases: When driving on a small angled Y-shaped road. When driving on a winding road. When driving on a slippery road such as in sand, gravel, snow, etc. When driving on a long straight road.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS (b) Inappropriate route guidance may occur in the following cases: When turning at an intersection off the 12 designated route guidance. If you set more than one destination but skip any of them, auto reroute will display a route returning to the destination on the previous route. When turning at an intersection for which there is no route guidance. When passing through an intersection for which there is no route guidance.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS LICENSE GRANT GDT grants you a non-exclusive license to use your copy of the DATABASE for your personal use or for use in your business’ internal operations. This license does not include the right to grant sub-licenses. LIMITATIONS ON USE The DATABASE is restricted for use in the specific system for which it was created.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS WARNINGS The DATABASE reflects reality as existing before you received the DATABASE and it comprises data and information from government and other sources, which may contain errors and omissions. Accordingly, the DATABASE may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and due to the nature of the sources used.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS 4. Disclaimer of warranty EXCEPT AS STATED HEREIN, INFOUSA MAKES NO EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR WARRANTY OF MERCHANTABILITY. 5. Limitation of Liability EITHER INFOUSA OR SUPPLIER OF POI DATA SHALL NOT BE LIABLE FOR ANY INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES MADE OR ALLEGED IN CONNECTION WITH YOUR USE OF THE POI DATA.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS Disclaimer of Liability: DENSO SHALL NOT BE LIABLE TO YOU FOR ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF ITS NATURE, ALLEGING ANY LOSS, INJURY OR DAMAGES, WHETHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES, INCLUDING ANY LOSS OF PROFIT, REVENUE OR CONTRACTS ARISING OUT OF YOUR POSSESSION, USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS To confirm the database version and disc coverage area 1. Push the “MENU” button. The map database is normally updated once a year. Contact your dealer for information about the availability and pricing of an update. 2. Touch the “Map To display the disc coverage area, touch the “Covered Area” switch. Confirm the covered area on the screen. Contact your dealer to find out if there is a more recent update released. DVD” switch.
05 4RUNNER NAVI_U (L/O 0408) BASIC FUNCTIONS To replace map disc The slot for the map disc is behind the display. To lower the display, push the “OPEN” button. After replacing map disc, push the button again to close the display. CAUTION Do not place anything on the opened display, as such items may be thrown about in the compartment and possibly injure people in the vehicle during sudden braking or in an accident.