2009 Navigation System Quick Reference Guide 10/16/08 12:58:48 PM 413067M1.
TABLE OF CONTENTS LIMITATIONS OF THIS QUICK REFERENCE GUIDE 1 BASIC OPERATION 2 DESTINATION INPUT By Address Note on Voice Recognition Tips for Using Voice Recognition By Address - Voice Recognition 3 3 5 5 5 DESTINATION INPUT - POINT OF INTEREST (POI) Point of Interest by Name Point of Interest by Category Point of Interest by Category - Voice Recognition 7 7 8 9 DESTINATION INPUT - TELEPHONE NUMBER Business or Registered Addresses 10 10 SET HOME 11 CONNECT A BLUETOOTH PHONE 13 CALLING BY VOI
BASIC OPERATION 1 8 AM SEEK TRACK FM SAT DISC AUX INFO PHONE 7 DEST 6 MAP 5 VOICE LOAD • LOAD DISP SETUP 4 3 2 £ NORTH-UP OR COMPASS MODE Icon Touch to change the map display between North-up or Head-up perspectives. x MAP/VOICE Button Repeat the last voice guidance prompt, cancel the map scrolling feature, or display the current position. Ó ZOOM IN/ZOOM OUT Icons Touch to magnify or reduce the map scale. È DESTINATION Button Input the destination by one of several methods.
DESTINATION INPUT BY ADDRESS step 1 step 3 step 5 3 413067M1.indd Sec1:3 step 2 and move Touch to step 4. To change Search Area, touch and move to step 3. Select the desired Search Area and touch . step 4 Input the city name and touch . Touch the desired city name. step 6 Input the street name and touch . Press the DEST panel button followed by . Quick Tip - Enter the street name without prefixes such as North or the letter N.
DESTINATION INPUT BY ADDRESS step 7 step 9 Touch the desired street name. Touch . step 8 step 10 Input the house number and . touch Select the desired Route Preferences by touching followed by . Touch to confirm selection. step 11 Touch guidance. to start route 4 413067M1.
DESTINATION INPUT NOTE ON VOICE RECOGNITION The navigation system voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the system database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available for every street and city. TIPS FOR USING VOICE RECOGNITION tip 1 A large TALK icon will appear on the NAV screen to signal when to speak your command.
DESTINATION INPUT BY ADDRESS-VOICE RECOGNITION step 3 After the beep say the city name or, "Change state" to search in another state. step 4 After the beep say the street name. step 5 After the beep say the house number. step 6 After the beep say, “Enter” to confirm destination. step 7 Touch guidance. to start route 6 413067M1.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY NAME step 1 Press the DEST panel button followed by . step 2 step 3 Input the POI name and touch . step 4 Touch . or to scroll up Use or down. Touch the desired destination. Quick Tip - If the POI isn’t listed in the database verify the spelling and Search Area for accuracy. step 5 Touch . Quick Tip - Touching next to the POI name will display the address and telephone number.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by . step 2 step 3 Touch the desired category location. step 4 Touch the desired category icon followed by the desired sub-category. step 5 step 6 Touch . See page 15 to select desired Route Preference. Touch to start route guidance. Use or to scroll up or down. Touch the desired point of interest. Touch . 8 413067M1_r1.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press on the steering wheel. After the beep say, “Destination.” step 2 After the beep say, “Point of Interest.” Quick Tip - If you know your next command, you can press at any time to interrupt the prompt. Speak your command after the beep. step 3 After the beep say, “Near Here.” step 4 After the beep say, “Hotels.
DESTINATION INPUT - TELEPHONE NUMBER BUSINESS OR REGISTERED ADDRESSES step 1 Press the DEST panel button followed by . step 2 step 3 Select the business or registered address from the screen. step 4 step 5 See page 15 to select desired Route Preference. Touch to start route guidance. Touch . Input the area code and telephone number followed by . It is not necessary to dial “1.
SET HOME step 1 Press the SETUP panel button . followed by step 2 Touch . step 3 Touch step 4 Touch . step 6 Input the city name and touch . . Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Make sure you are in the desired Search Area. Touch . 11 413067M1.
SET HOME step 7 Touch the desired city name. step 8 Input the street name and touch . Quick Tip - Enter the street name without prefixes such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen. step 9 step 11 Touch the desired street name. Touch followed to change the by home icon. step 10 Input the house number and touch . step 12 Touch the desired icon for your home. Touch at the bottom right of the Edit Home screen.
CONNECT A BLUETOOTH PHONE step 1 Press the INFO PHONE followed by panel button step 2 Touch . Verify that Bluetooth feature on the phone is ON and is in discoverable mode. step 4 Upon connection, the system will indicate that the pairing process was successful. . Quick Tip - Verify the Bluetooth cell phone has been approved by visiting www.Toyota.Letstalk.com. step 3 Input the passkey listed on the screen into the approved Bluetooth cell phone.
CALLING BY VOICE RECOGNITION DIAL BY NUMBER step 1 Press on the steering wheel. After the beep say, “Phone.” step 2 After the beep say, “Dial by Number.” step 4 After the beep, say “Dial.” Quick Tip - If you know your next command, you can press at any time to interrupt the prompt. Speak your command after the beep. step 3 After the beep say the phone number digits individually (e.g. “Three, one, zero, four…”).
ADDITIONAL NAVIGATION FEATURES SEARCH AREA Prior to inputting the desired address select the appropriate Search Area by pressing . If the incorrect Search Area is chosen, the system will either find an address that closely matches in that area or will indicate that the address cannot be found. Select the desired Search Area and touch ROUTE PREFERENCES 3 ROUTES Once the address has been inputted, select the desired route preference(s) for the trip.
ADDITIONAL NAVIGATION FEATURES BEEP SETTING VOICE VOLUME PRESS PRESS SETUP PANEL BUTTON > SETUP PANEL BUTTON > Adjust the Beep sound On or Off. Adjust the Voice Guidance volume level. LANGUAGE CLOCK SETTINGS PRESS SETUP PANEL BUTTON > PRESS SETUP PANEL BUTTON > Select Language Preference: English, French or Spanish. Adjust the Time Zone and Daylight Saving Time option.
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME † PRESS SETUP PANEL BUTTON > > DETAILED NAVI SETTINGS > DRIVING SPEEDS The system can be customized to match your driving habits. Adjust the speed settings for Residential, Main Streets and Freeways to match your normal driving speed. Adjusting these settings will affect the estimated time of arrival (ETA). Please refer to the Navigation Owner's manual for a complete description of this feature.
VOICE COMMANDS Press on the steering wheel to activate the voice recognition feature. After the beep, say one of the voice commands listed. Please refer to the Navigation Owner’s Manual for additional information.
VOICE COMMANDS NAVIGATION MODE POI (POI must be entered via the destination screen, see page 9.) Attractions Attractions Bowling Centers Entertainment Golf Courses Health & Fitness Clubs Horse Racing Parks & Beaches Marinas Motor Sports Nightlife Performing Arts Ski Resorts Sports Complexes Sports & Fitness Automotive Automobile Clubs Auto Service & Maint.
XM NAVTRAFFIC ® XM NavTraffic® integrates with your navigation system to display traffic information. Traffic events and flow data are updated 12 times each hour from a variety of sources. XM NavTraffic® service is available in 80 major metropolitan across the continental US with more to come. New VENZA owners with factory-installed navigation receive a 90-day complimentary trial subscription from XM. Traffic information provided by XM NavTraffic®: http://www.xmradio.com/navtraffic/index.
XM NAVTRAFFIC ® XM NAVTRAFFIC ® PREFERENCES SHOW XM NAVTRAFFIC ® INFORMATION step 1 Touch step . 2 . When Touch the yellow bar appears, the preference has been selected. Touch , traffic flow is displayed by color lines right along the side of the freeways: Free flow traffic Moderate traffic Heavy congestion AUDIO AVOID TRAFFIC step 1 step 3 Press 21 413067M1.indd Sec1:21 SETUP followed by . step 2 Touch . Select from the Auto Avoid Traffic option. Touch followed by .
XM NAVTRAFFIC ® XM NAVTRAFFIC ® PREFERENCES TRAFFIC VOICE GUIDANCE step 1 Press SETUP followed by . step 2 step 2 Touch to display Traffic Voice Guidance option on page 2. Select to receive voice notification of traffic events within 20 miles of the suggested route. followed by Touch . SHOW FREE FLOWING TRAFFIC step 1 step 3 Press SETUP followed by Select from the Show Free Flowing Traffic option. Touch followed by . Free flowing traffic is illustrated by green arrows on the map. 413067M1.
MN 00505-NAV09-VEN Printed in the USA 10/08 413067M1.