PRIUS CUSTOMER EXPERIENCE CENTER 2 0 1 1 1-800-331-4331 NAVIGATION SYSTEM QUICK REFERENCE GUIDE Printed in U.S.A.
TABLE OF CONTENTS VOICE COMMANDS LIMITATIONS OF THIS QUICK REFERENCE GUIDE 1 BASIC OPERATION 2 DESTINATION INPUT By Address Note on Voice Recognition Tips for Using Voice Recognition By Address - Voice Recognition 3 3 5 5 5 DESTINATION INPUT - POINT OF INTEREST (POI) Point of Interest by Name Point of Interest by Category Point of Interest by Category - Voice Recognition 7 7 8 9 SET HOME 10 CONNECT A BLUETOOTH PHONE 12 CALLING BY VOICE RECOGNITION Dial by Number Dial by Name 13 13 14 ADDITIO
BASIC OPERATION . PWR VOL TUNE-FILE PWR 8 . CLOSE SEEK AM TRACK . 7 SAT DEST 6 CD MAP VOICE 5 AUX SETUP 4 AUDIO DISP 3 FM 1 FILE TUNE VOL 9 INFO PHONE 2 £ AUDIO Button Set the radio station presets, adjust the balance and tone controls. È DESTINATION Button Input the destination by one of several methods. Ó ZOOM IN/ZOOM OUT Icons Touch to magnify or reduce the map scale. Ç INFO/PHONE Button Access Phone, Map Data, and Calendar.
DESTINATION INPUT BY ADDRESS step 1 step 3 step 5 3 Press the DEST panel button followed by . step 2 and move to step 4. To change Search Area, touch and move to step 3. Select the desired Search Area and touch . step 4 Input the city name and touch . Touch the desired city name. step 6 Input the street name and touch . Touch Quick Tip - Enter the street name without prefixes such as North or the letter N.
DESTINATION INPUT BY ADDRESS step 7 Touch the desired street name. step 8 step 9 Touch step 10 step 11 Touch guidance. . Input the house number and . touch Select the desired Route Preferences by touching followed by . Touch to confirm selection.
DESTINATION INPUT NOTE ON VOICE RECOGNITION The navigation system's voice recognition feature will compare your spoken words with computer-generated word patterns preprogrammed in the database. If the system does not provide your intended match, please try a different pronunciation. Voice-activation names are not available for every street and city. TIPS FOR USING VOICE RECOGNITION tip 1 A large TALK icon will appear on the NAV screen to signal when to speak your command.
DESTINATION INPUT BY ADDRESS-VOICE RECOGNITION step 3 After the beep say the city name or, "Change state" to search in another state. step 4 After the beep say the street name. step 5 After the beep say the house number. step 6 After the beep say, “Enter” to confirm destination. step 7 Touch guidance.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY NAME step 1 Press the DEST panel button followed by . step 2 step 3 Input the POI name and touch . step 4 Touch . or to scroll up Use or down. Touch the desired destination. Quick Tip - If the POI isn’t listed in the database verify the spelling and Search Area for accuracy. step 5 Touch . Quick Tip - Touching next to the POI name will display the address and telephone number.
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY step 1 Press the DEST panel button followed by . step 2 Touch step 3 Touch the desired category location. step 4 Touch the desired category icon followed by the desired sub-category. step 5 step 6 Touch . See page 15 to select desired Route Preference. Touch to start route guidance. or to scroll up or Use down. Touch the desired point of interest. .
DESTINATION INPUT - POINT OF INTEREST (POI) POINT OF INTEREST BY CATEGORY - VOICE RECOGNITION step 1 Press on the steering wheel. After the beep say, “Destination.” step 2 After the beep say, “Point of Interest.” Quick Tip - If you know your next command, at any time to interrupt the you can press prompt. Speak your command after the beep. step 3 After the beep say, “Near Here.” step 4 After the beep say, “Hotels.
SET HOME step 1 Press the SETUP panel button followed by . step 2 Touch . step 3 Touch step 4 Touch . step 6 Input the city name and touch . . Tip - For security reasons, use a point close to your home instead of your actual home address. step 5 Make sure you are in the desired Search Area. Touch .
SET HOME step 7 Touch the desired city name. step 8 Input the street name and touch . Quick Tip - Enter the street name without prefixes such as North or the letter N. The system will display the base street name without prefixes or suffixes on the next screen. step 9 step 11 11 Touch the desired street name. Touch followed by to change the home icon. step 10 Input the house number and touch . step 12 Touch the desired icon for your home. Touch at the bottom right of the Edit Home screen.
CONNECT A BLUETOOTH PHONE If you have difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more information about phone connections and compatibility. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen.
CALLING BY VOICE RECOGNITION DIAL BY NUMBER step 1 Press on the steering wheel. After the beep say, “Phone.” step 2 After the beep say, “Dial by Number.” step 4 After the beep, say “Dial” or on the steering press wheel. Quick Tip - If you know your next command, you can press at any time to interrupt the prompt. Speak your command after the beep. step 3 After the beep say the phone number digits individually, without pausing (e.g. “Three, one, zero, four…”).
CALLING BY VOICE RECOGNITION DIAL BY NAME If you have difficulty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide, or go to www.Toyota.Letstalk.com for more information about phone connections and compatibility. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen.
ADDITIONAL NAVIGATION FEATURES SEARCH AREA Prior to inputting the desired address select the Search Area by pressing . If the incorrect Search Area is chosen, the system will either find an address that closely matches in that area or will indicate that the address cannot be found. Select the desired Search Area and touch ROUTE PREFERENCES 3 ROUTES Once the address has been inputted, select the desired route preference(s) for the trip. When the yellow bar appears, the preference has been selected.
ADDITIONAL NAVIGATION FEATURES BEEP SETTING PRESS SETUP PANEL BUTTON > VOICE VOLUME PRESS SETUP PANEL BUTTON > Adjust the Beep sound On or Off. Adjust the Voice Guidance volume level. LANGUAGE CLOCK SETTINGS PRESS SETUP PANEL BUTTON > PRESS SETUP PANEL BUTTON > Select Language Preference: English, French or Spanish. Adjust the Time Zone and Daylight Saving Time option.
ADDITIONAL NAVIGATION FEATURES ESTIMATED DISTANCE AND TIME † PRESS > SETUP PANEL BUTTON > > The system can be customized to match your driving habits. Adjust the speed settings for Residential, Main Streets and Freeways to match your normal driving speed. Adjusting these settings will affect the estimated time of arrival (ETA). Please refer to the Navigation Owner's manual for a complete description of this feature. † The system does not account for traffic signals or traffic flow.
XM NAVTRAFFIC ® XM NavTraffic® integrates with your navigation system to display traffic information. Traffic events and flow data are updated every 2 minutes from a variety of sources. XM NavTraffic® service is available in 100 major metropolitan areas across the US and Canada with more to come. New PRIUS owners with factory-installed navigation receive a 90-day complimentary trial subscription from XM. Traffic information provided by XM NavTraffic®: http://www.xmradio.com/navtraffic/index.
XM NAVTRAFFIC ® XM NAVTRAFFIC ® PREFERENCES SHOW XM NAVTRAFFIC ® INFORMATION step 1 MAP Press the VOICE followed by panel button . step 2 Touch . When the yellow bar appears, the preference has been selected. Touch , traffic flow is displayed by colored lines alongside freeway or highways: Free flow traffic Moderate traffic Heavy congestion AUTO AVOID TRAFFIC step 1 step 3 19 Press the SETUP panel button followed by . Select from the Auto Avoid Traffic option. Touch followed by .
XM NAVTRAFFIC ® XM NAVTRAFFIC ® PREFERENCES TRAFFIC VOICE GUIDANCE step 1 Press the SETUP panel button followed by . step 2 step 2 Touch to display Traffic Voice Guidance option on page 2. Select to receive voice notification of traffic events within 20 miles along the current route. followed by Touch . SHOW FREE FLOWING TRAFFIC step 1 step 3 Press the SETUP panel button followed by . Touch . Select from the Show Free Flowing Traffic option. Touch followed by .
VOICE COMMANDS Press and release on the steering wheel to activate the voice recognition feature. After the beep, say one of the voice commands shown on the screen or listed below. Please refer to the Navigation Owner’s Manual for additional information.
