Pictorial index Search by illustration 1 For safety and security Make sure to read through them 2 Instrument cluster How to read the gauges and meters, the variety of warning lights and indicators, etc. Operation of 3 each component Opening and closing the doors and windows, adjustment before driving, etc. 4 Driving Operations and advices which are necessary for driving 5 Multimedia Operating the multimedia system 6 Interior features Usage of the interior features, etc.
TABLE OF CONTENTS For your information....................... 8 Reading this manual .................... 12 How to search.............................. 13 Pictorial index .............................. 14 1 For safety and security 1-1. For safe use Before driving ...................... 24 For safety drive ................... 26 Seat belts ............................ 28 SRS airbags ........................ 34 Front passenger occupant classification system ......... 45 Safety information for children ...
4 Driving 4-1. Before driving Driving the vehicle............. 154 Cargo and luggage............ 163 Vehicle load limits ............. 167 Trailer towing..................... 168 Dinghy towing.................... 186 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system)........ 187 Engine (ignition) switch (vehicles with a smart key system)..................... 190 Automatic transmission ..... 195 Manual transmission ......... 199 Turn signal lever................
TABLE OF CONTENTS 5 Multimedia 5-1. Basic Operations Audio system types ........... 280 Audio system..................... 282 Steering wheel audio switches .......................... 284 USB Port/AUX Port ........... 285 Basic audio operations...... 286 5-2. Setup Setup menu....................... 288 General settings ................ 289 Audio settings.................... 291 Display settings ................. 292 Voice settings.................... 293 5-3.
6 Interior features 6-1. Using the air conditioning system Manual air conditioning system............................. 370 Automatic air conditioning system............................. 376 Seat heaters...................... 383 6-2. Using the interior lights Interior lights list ................ 385 • Interior light ................... 386 • Front personal lights ..... 386 • Cargo lamp main switch ............................ 387 6-3. Using the storage features List of storage features......
TABLE OF CONTENTS 8-2. Steps to take in an emergency If your vehicle needs to be towed ......................... 503 If you think something is wrong .............................. 508 Fuel pump shut off system............................. 509 If a warning light turns on or a warning buzzer sounds ............................ 510 If a warning message is displayed (vehicles with a multi-information display)............................ 519 If you have a flat tire..........
1 2 3 4 5 6 7 8 9 10
For your information Main Owner’s Manual Please note that this manual applies to all models and all equipment, including options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing. However, because of the Toyota policy of continual product improvement, we reserve the right to make changes at any time without notice.
Installation of a mobile two-way radio system The installation of a mobile two-way radio system in your vehicle could affect electronic systems such as: ● Multiport fuel injection system/sequential multiport fuel injection system ● Cruise control system (if equipped) ● Anti-lock brake system ● SRS airbag system ● Seat belt pretensioner system Be sure to check with your Toyota dealer for precautionary measures or special instructions regarding installation of a mobile two-way radio system.
Event data recorder This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
Scrapping of your Toyota The SRS airbag and seat belt pretensioner devices in your Toyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire. Be sure to have the systems of the SRS airbag and seat belt pretensioner removed and disposed of by a qualified service shop or by your Toyota dealer before you scrap your vehicle. Perchlorate Material Special handling may apply, See www.dtsc.ca.
Reading this manual WARNING: Explains something that, if not obeyed, could cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. 1 2 3 Indicates operating or working procedures. Follow the steps in numerical order. Indicates the action (pushing, turning, etc.) used to operate switches and other devices. Indicates the outcome of an operation (e.g. a lid opens).
How to search ■ Searching by name • Alphabetical index .......P. 624 ■ Searching by installation position • Pictorial index................P. 14 ■ Searching by symptom or sound • What to do if... (Troubleshooting) ........P. 620 ■ Searching by title • Table of contents .............P.
Pictorial index Pictorial index ■ Exterior 9 2 16 14 5 15 17 18 3 8 12 10 4 11 13 18 7 1 6 STYPIBD001 The illustration represents the Double Cab models and may differ from the body shape of other models. 1 Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 109 Locking/unlocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 109 Opening/closing the door windows . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index 6 Fuel filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Refueling method. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fuel type/fuel tank capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tire size/inflation pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . Winter tires/tire chain . . . . . . . . . . . . .
Pictorial index ■ Instrument panel 6 8 3 4 9 7 1 11 1 5 2 10 STYPIBD002 1 Engine switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 187, 190 Starting the engine/changing the positions*1 . . . . . . . . . . . . . . P. 187 Starting the engine/changing the modes*2 . . . . . . . . . . . . . . . P. 191 Emergency stop of the engine . . . . . . . . . . . . . . . . . . . . . . . . . P. 501 When the engine will not start . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index 17 5 Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 202 Applying/releasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 202 Precautions against winter season . . . . . . . . . . . . . . . . . . . . . P. 271 Warning light/warning buzzer/warning message*5 . . . . . P. 512, 525 6 Turn signal lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 201 Headlight switch . . . . . . . . . . . . . . . . . .
Pictorial index ■ Switches 1 Cargo lamp main switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . P. 387 2 Power outlet main switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . P. 409 3 “CLUTCH START CANCEL” switch*2 . . . . . . . . . . . . . . . . . P. 263 4 Outside rear view mirror switch . . . . . . . . . . . . . . . . . . . . . . P. 143 5 Window lock switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 145 6 Door lock switches . . . . . . . . . . . . . . . . . .
Pictorial index Type A 3 4 5 ECT PWR 1 Type B 6 3 7 5 4 ECT PWR 2 STYPIBD004 1 Emergency flasher switch . . . . . . . . . . . . . . . . . . . . . . . . . . P. 500 2 Front-wheel drive control switch*1 . . . . . . . . . . . . . . . . . . . P. 244 3 Power mode switch*3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 196 4 Wireless charger switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . P. 414 5 AUX port/USB port*4 . . . . . . . . . . . . . . . . . . . . . . . . . .
Pictorial index 1 2 3 4 5 STYPIBD005 1 Audio remote control switches*1 . . . . . . . . . . . . . . . . . . . . . P. 284 2 Talk switch*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 363 3 Telephone switches*1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 342 4 Meter control switches*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 94 5 Cruise control switch*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
Pictorial index ■ Interior 5 10 5 4 6 10 3 8 7 1 9 2 STYPIBD006 1 SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 34 2 Floor mats. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 24 3 Front seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 129 4 Rear seats*2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 131 5 Head restraints. . . . . . . . .
Pictorial index 1 Inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 140 2 Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 406 3 Vanity mirrors* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 406 4 Front personal lights/interior light . . . . . . . . . . . . . . . . . . . . P. 386 5 VSC off switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . P.
For safety and security 1 1-1. For safe use Before driving...................... 24 For safety drive ................... 26 Seat belts ............................ 28 SRS airbags........................ 34 Front passenger occupant classification system ......... 45 Safety information for children ........................ 50 Child restraint systems........ 51 Installing child restraints...... 55 Exhaust gas precautions..... 68 1-2. Theft deterrent system Engine immobilizer system .......................
1-1. For safe use Before driving Floor mat Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. 1 Insert the retaining hooks (clips) into the floor mat eyelets. 2 Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. *: Always align the * marks. The shape of the retaining hooks (clips) may differ from that shown in the illustration.
1-1. For safe use 25 WARNING ● Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor. ● With the engine stopped and the shift lever in P (automatic transmission) or N (manual transmission), fully depress each pedal to the floor to make sure it does not interfere with the floor mat. 1 For safety and security Observe the following precautions.
1-1. For safe use For safety drive For safe driving, adjust the seat and mirror to an appropriate position before driving. Correct driving posture 1 Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer. (P. 129) 2 Adjust the seat so that you can depress the pedals fully and so that your arms bend slightly at the elbow when gripping the steering wheel. (P.
1-1. For safe use 27 WARNING 1 For safety and security Observe the following precautions. Failure to do so may result in death or serious injury. ● Do not adjust the position of the driver’s seat while driving. Doing so could cause the driver to lose control of the vehicle. ● Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint.
1-1. For safe use Seat belts Make sure that all occupants are wearing their seat belts before driving the vehicle. Correct use of the seat belts ● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoulder. ● Position the lap belt as low as possible over the hips. ● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt.
1-1. For safe use 29 Adjusting the seat belt shoulder anchor height (front seats) 1 Push the seat belt shoulder anchor down while pressing the release button. 2 Push the seat belt shoulder anchor up. Seat belt pretensioners (front seats) The pretensioners help the seat belts to quickly restrain the occupants by retracting the seat belts when the vehicle is subjected to certain types of severe frontal or side collision or a vehicle rollover.
1-1. For safe use ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully. ■ Automatic locking retractor (ALR) When a passenger’s shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended.
1-1. For safe use 31 WARNING Obtain medical advice and wear the seat belt in the proper way. (P. 28) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occupants, extending the shoulder belt completely over the shoulder and avoiding belt contact with the rounding of the abdominal area.
1-1. For safe use WARNING ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt. ■ Seat belt pretensioners (front seats) ● Do not place anything, such as a cushion, on the front passenger’s seat.
1-1. For safe use 33 WARNING NOTICE ■ When using a seat belt extender When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself. 1 For safety and security ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender.
1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.
1-1.
1-1.
1-1. For safe use 37 WARNING ● If the seat belt extender has been connected to the front seat belt buckles but the seat belt extender has not also been fastened to the latch plate of the seat belt, the SRS front airbags will judge that the driver and front passenger are wearing the seat belt even though the seat belt has not been connected. In this case, the SRS front airbags may not activate correctly in a collision, resulting in death or serious injury in the event of a collision.
1-1. For safe use WARNING ■ SRS airbag precautions ● The SRS front passenger airbag also deploys with considerable force, and can cause death or serious injury especially if the front passenger is very close to the airbag. The front passenger seat should be as far from the airbag as possible with the seatback adjusted, so the front passenger sits upright. ● Improperly seated and/or restrained infants and children can be killed or seriously injured by a deploying airbag.
1-1. For safe use 39 WARNING ■ SRS airbag precautions ● Do not allow anyone to kneel on the passenger seats toward the door or put their head or hands outside the vehicle. 1 ● Do not attach anything to areas such as a door, windshield, side windows, front or rear pillar, roof side rail and assist grip. ● Do not attach any heavy, sharp or hard objects such as keys and accessories to the key.
1-1. For safe use WARNING ■ SRS airbag precautions ● Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with inflation of the airbags. Such accessories may prevent the side airbags from activating correctly, disable the system or cause the side airbags to inflate accidentally, resulting in death or serious injury. ● Do not strike or apply significant levels of force to the area of the SRS airbag components.
1-1. For safe use 41 1 For safety and security ■ If the SRS airbags deploy (inflate) ● Slight abrasions, burns, bruising, etc., may be sustained from SRS airbags, due to the extremely high speed deployment (inflation) by hot gases. ● A loud noise and white powder will be emitted. ● Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, parts of the front and rear pillars and roof side rails, may be hot for several minutes.
1-1. For safe use ■ Conditions under which the SRS airbags may deploy (inflate), other than a collision The SRS front airbags and SRS side and curtain shield airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.
1-1. For safe use 43 ■ Types of collisions that may not deploy the SRS airbags (SRS side and curtain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger compartment.
1-1. For safe use ■ When to contact your Toyota dealer In the following cases, the vehicle will require inspection and/or repair. Contact your Toyota dealer as soon as possible. ● Any of the SRS airbags have been inflated. ● The front of the vehicle is damaged or deformed, or was involved in an accident that was not severe enough to cause the SRS front airbags to inflate.
1-1. For safe use 45 Front passenger occupant classification system Your vehicle is equipped with a front passenger occupant classification system. This system detects the conditions of the front passenger seat and activates or deactivates the devices for the front passenger.
1-1.
1-1.
1-1. For safe use *1: The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and posture. *2: In the event the front passenger is wearing a seat belt *3: In the event the front passenger does not wear a seat belt.
1-1. For safe use 49 WARNING 1 For safety and security ■ Front passenger occupant classification system precautions ● Do not recline the front passenger seatback so far that it touches a rear seat or a back wall. This may cause the “AIR BAG OFF” indicator light to be illuminated, which indicates that the SRS airbags for the front passenger will not activate in the event of a severe accident.
1-1. For safe use Safety information for children Observe the following precautions when children are in the vehicle. Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. ● Vehicles with rear seats: It is recommended that children sit in the rear seats to avoid accidental contact with the shift lever, wiper switch, etc.
1-1. For safe use 51 Child restraint systems A child restraint system for a small child or baby must itself be properly restrained on the seat with the lap portion of the lap/ shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems. Studies have shown that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat.
1-1. For safe use Types of child restraints Child restraint systems are classified into the following 3 types according to the age and size of the child: Rear facing Infant seat/convertible seat Booster seat Forward facing Convertible seat ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belt.
1-1. For safe use 53 WARNING 1 For safety and security ■ Child restraint precautions ● For effective protection in automobile accidents and sudden stops, a child must be properly restrained, using a seat belt or child restraint system depending on the age and size of the child. Holding a child in your arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior.
1-1. For safe use WARNING ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of an accident.
1-1. For safe use 55 Installing child restraints Using the LATCH anchors (P. 58, 59) Access Cab models (vehicles with rear seats) Child restraint LATCH anchors LATCH anchors are provided for each of rear seats. Double Cab models Child restraint LATCH anchors LATCH anchors are provided for the outer rear seats. (Buttons displaying the location of the anchors are attached to the seats.) 1 For safety and security Follow the child restraint system manufacturer’s instructions.
1-1. For safe use Using the seat belts (P. 60) Seat belts equipped with a child restraint locking mechanism (ALR/ELR belts except driver’s seat belt) (P. 30) Using the top tether strap (P. 63, 65) Access Cab models (vehicles without rear seats) Anchor bracket (for top tether strap) Anchor bracket is provided for passenger seat.
1-1. For safe use 57 Access Cab models (vehicles with rear seats) Anchor bracket (for top tether strap) Anchor bracket is provided for each rear seat. 1 For safety and security Double Cab models Anchor bracket (for top tether strap) Anchor bracket is provided for each rear seat.
1-1. For safe use Installation with LATCH system (Access Cab models [vehicles with rear seats]) Type A Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system. Canada only Type B Latch the buckles onto the LATCH anchors.
1-1. For safe use 59 Installation with LATCH system (Double Cab models) Type A 1 Widen the gap between the seat cushion and seatback slightly. 2 Latch the hooks of the lower straps onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. 1 For safety and security For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.
1-1. For safe use Installing child restraints using a seat belt (child restraint lock function belt) ■ Rear-facing (vehicles without rear seats) Infant seat/con- vertible seat Never install a rear-facing child restrain. Your vehicle is not designed to carry and infant. ■ Rear-facing (vehicles with rear seats) Infant seat/convertible seat 1 Place the child restraint sys- tem on the seat facing the rear of the vehicle.
1-1. For safe use 61 4 While pushing the child restraint system down into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. ■ Forward-facing Convertible seat 1 Place the child restraint sys- tem on the seat facing the front of the vehicle. 2 Run the seat belt through the child restraint system and insert the plate into the buckle. Make sure that the belt is not twisted.
1-1. For safe use 4 While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. 5 If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (P.
1-1. For safe use 63 Removing a child restraint installed with a seat belt Push the buckle release button and fully retract the seat belt. 1 Vehicles without rear seats 1 Remove the head restraint. 2 Remove the anchor bracket cover. Store the removed cover in a safe place such as the glove box. 3 Secure the child restraint system using a seat belt. 4 Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched.
1-1. For safe use 5 Replace the head restraint. Vehicles with rear seats 1 Remove the anchor bracket covers. Store the removed covers in a safe place such as the glove box. 2 Secure the child restraint system using the seat belt or the lower anchors. 3 Route the top tether strap through the routing device as shown in the illustration. Make sure the top tether strap is not twisted. 4 Latch the hook onto the anchor bracket and tighten the top tether strap.
1-1. For safe use 65 Child restraint systems with a top tether strap (Double Cab models) 1 Remove the head restraint. Installing position: 1 Outer rear seat 1 2 Center rear seat 1 Swing the seatback forward slightly. (P. 131) 2 Latch the hook onto the anchor bracket. 3 Return the seatback. Make sure the seatback is securely locked by pushing it forward and rearward on the top.
1-1. For safe use ■ Laws and regulations pertaining to anchorages The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifications can be used. This vehicle is designed to conform to the SAE J1819. WARNING ■ When installing a booster seat To prevent the belt from going into ALR lock mode, do not fully extend the shoulder belt. ALR mode causes the belt to tighten only. This could cause injury or discomfort to the child. (P.
1-1. For safe use 67 WARNING 1 For safety and security ■ When installing a child restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder. Failure to do so may result in death or serious injury in the event of an accident or a sudden braking.
1-1. For safe use Exhaust gas precautions Harmful substance to the human body is included in exhaust gases if inhale. WARNING Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions. Failure to do so may cause exhaust gases to enter the vehicle and may lead to an accident caused by light-headedness, or may lead to death or a serious health hazard.
1-2. Theft deterrent system 69 Engine immobilizer system The vehicle’s keys have built-in transponder chips that prevent the engine from starting if a key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle. 1 This system is designed to help prevent vehicle theft but does not guarantee absolute security against all vehicle thefts.
1-2. Theft deterrent system ■ System maintenance The vehicle has a maintenance-free type engine immobilizer system. ■ Conditions that may cause the system to malfunction ● If the grip portion of the key is in contact with a metallic object ● If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle ■ Certifications for the engine immobilizer system For vehicles sold in U.S.A.
1-2.
1-2.
1-2.
1-2.
1-2.
1-2.
1-2. Theft deterrent system 77 NOTICE ■ To ensure the system operates correctly Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
1-2. Theft deterrent system Alarm The alarm The alarm uses light and sound to give an alert when an intrusion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opened in any way other than using the entry function, wireless remote control or mechanical key. (The doors will lock again automatically.) ● The hood is opened. Setting the alarm system Close the doors and hood, and lock all the doors.
1-2. Theft deterrent system 79 ● A person inside the vehicle opens a door or hood, or unlocks the vehicle using an inside lock button. ● The battery is recharged or replaced when the vehicle is locked. 1 For safety and security ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ● Nobody is in the vehicle.
1-2. Theft deterrent system ■ Alarm-operated door lock In the following cases, depending on the situation, the door may automatically lock to prevent improper entry into the vehicle: ● When a person remaining in the vehicle locks the door and the alarm is activated. ● While the alarm is activated, a person remaining in the vehicle unlocks the door. ● When recharging or replacing the battery. NOTICE ■ To ensure the system operates correctly Do not modify or remove the system.
Instrument cluster 2 2. Instrument cluster Warning lights and indicators .......................... 82 Gauges and meters ............ 88 Multi-information display ..... 93 Fuel consumption information ........................
2. Instrument cluster Warning lights and indicators The warning lights and indicators on the instrument cluster and center panel inform the driver of the status of the vehicle’s various systems. For the purpose of explanation, the following illustration displays all warning lights and indicators illuminated.
2. Instrument cluster 83 Warning lights Warning lights inform the driver of malfunctions in the indicated vehicle’s systems. *1 *1 Brake system warning light (P. 510) (U.S.A.) ABS warning light (P. 511) (Canada) *1 *1, 3 Brake system warning light (P. 510) Slip indicator (P. 511) *2 *1, 2 Cruise control indicator light (P. 511) Charging system warning light (P. 510) (Yellow) (If equipped) *1, 2 *1, 2, 4 Low engine oil pressure warning light (P.
2. Instrument cluster Low fuel level warning light (P. 512) *1, 2 Brake Override System warning light (P. 513) *1 Seat belt reminder light (P. 512) Tire pressure light (P. 513) warning (If equipped) (U.S.A.) (Canada) Parking brake indicator (P. 512) *1, 2 (Canada) Parking brake indicator (P. 512) *1, 5 *2, 7 *1, 2 Master warning (P. 513) light Low windshield washer fluid warning light (P. 513) Low engine oil level warning light (P. 514) Maintenance required remainder light (P.
2. Instrument cluster 85 Indicators The indicators inform the driver of the operating state of the vehicle’s various systems. *3 Turn signal indicator (P. 201) VSC off indicator (P. 248, 265, 266) *3 Headlight indicator (P. 203) “TRAC OFF” indicator (P. 265, 266) 2 (U.S.A.) (Canada) (If equipped) Active traction control system indicator (P. 253) Four-wheel drive indicator (P. 244) Headlight high beam indicator (P. 205) (Green) (4WD models) *3 Fog light indicator (P.
2. Instrument cluster *7, 8 Parking brake indicator (P. 202) (U.S.A.) (If equipped) BSM outside rear view mirror indicator (P. 236) *9 Parking brake indicator (P. 202) (Canada) Security indicator (P. 69, 78) (If equipped) *3, 9 *2, 6 Low outside temperature indicator (P. 88) “AIR BAG ON/OFF” indicators (P. 45) *1: Vehicles with an automatic transmission. *2: For vehicles with a multi-information display, this light illuminates on the multi-information display.
2. Instrument cluster 87 *7: In order to confirm operation, the BSM outside rear view mirror indicators illuminate in the following situations: • When the engine switch is turned to the “ON” position (vehicles without a smart key system) or IGNITION ON mode (vehicles with a smart key system) while the BSM main switch is set to ON.
2. Instrument cluster Gauges and meters Vehicles without a multi-information display 1 Tachometer Displays the engine speed in revolutions per minute 2 Shift position and shift range (vehicles with an automatic transmis- sion) Displays the selected shift position or selected shift range. (P. 195) 3 Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C).
2. Instrument cluster 89 Vehicles with a multi-information display 2 Displays the engine speed in revolutions per minute. 2 Outside temperature Displays the outside temperature within the range of -40°F (-40°C) to 122°F (50°C). Low outside temperature indicator comes on when the ambient temperature is 37°F (3°C) or lower. 3 Speedometer Displays the vehicle speed. 4 Fuel gauge Displays the quantity of fuel remaining in the tank.
2. Instrument cluster Changing the odometer and trip meter display Vehicles without a multi-information display: Pressing the button switches between trip meter A and trip meter B. Vehicles with a multi-information display: Pressing the button switches between odometer and trip meter. ■ Odometer Displays the total distance the vehicle has been driven. ■ Trip meter A*/trip meter B* Displays the distance the vehicle has been driven since the meter was last reset.
2. Instrument cluster 91 2 Instrument cluster ■ The multi-information display illuminate when (if equipped) Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The engine switch is in IGNITION ON mode. ■ The brightness of the instrument panel lights When the tail lights are turned on, the display’s brightness will be reduced slightly unless the meter brightness level adjustment is set to the brightest setting.
2. Instrument cluster WARNING ■ The information display at low temperatures Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed. For example, there is a lag between the driver’s shifting and the new gear number appearing on the display.
2. Instrument cluster 93 Multi-information display Display contents The multi-information display presents the driver with a variety of vehicle data. ● Menu icons Displays the following information when an icon is selected. 2 (P. 94) Instrument cluster Some of the information may be displayed automatically depending on the situation. Drive information Select to display various drive data. (P.
2.
2. Instrument cluster 95 ● Trip distance*1/Distance*1, 2 Displays the engine was started and the distance since the function was reset, respectively ● Digital speedometer*1 ● Display off*1 A blank screen is displayed *1: Can be registered to Drive information 1 through 3. *2: Resetting procedures: Vehicle information ● Clinometer (if equipped) Displays the longitudinal and lateral inclination of the vehicle. ● Intuitive parking assist (if equipped) P. 220 ● Multi-terrain select (if equipped) P.
2. Instrument cluster ■ Customizable items ● Language Select to change the language on the display. ● Units Select to change the unit of measure for fuel consumption and temperature. ● Drive information 1 through 3 Select to select up to 2 items that will be displayed on a Drive information screen, up to 3 Drive information screens can be set. ● Pop-up display Select to set the following pop-up displays, which may appear in some situations, on/off.
2. Instrument cluster 97 WARNING ■ The information display at low temperatures P. 92 ■ Cautions during setting up the display As the engine needs to be running during setting up the display, ensure that the vehicle is parked in a place with adequate ventilation. In a closed area such as a garage, exhaust gases including harmful carbon monoxide (CO) may collect and enter the vehicle. This may lead to death or a serious health hazard.
2. Instrument cluster Fuel consumption information The fuel consumption information can be displayed on Entune Premium Audio and Entune Audio Plus screen. Display the trip information or past record screen Press the “APPS” button, and then select “Eco” on the screen. Fuel consumption ■ Trip information If the “Past Record” screen is displayed, select “Trip Information”.
2. Instrument cluster 99 ■ Past record If the “Trip Information” screen is displayed, select “Past Record”. 1 Resetting the past record data 2 Best recorded fuel consump- tion 3 Average fuel consumption (if equipped) 4 Previous fuel consumption 2 record 6 Update the average fuel consumption data The average fuel consumption history is divided by color into past averages and the average fuel consumption since the last updated. Use the displayed average fuel consumption as a reference.
2.
Operation of each component 3-1. Key information Keys .................................. 102 3-2. Opening, closing and locking the doors Doors ................................ 109 Tailgate ............................. 116 Smart key system.............. 121 3-3. Adjusting the seats Front seats ........................ 129 Rear seats......................... 131 Head restraints.................. 134 3-4. Adjusting the steering wheel and mirrors Steering wheel ..................
3-1. Key information Keys The keys The following keys are provided with the vehicle.
3-1. Key information 103 Type D 1 Electronic keys • Operating the smart key system (P. 121) • Operating the wireless remote control function 2 Mechanical keys • Locks/unlocks driver’s door only the 3 Key • Locks/unlocks only the tailgate 4 Key number plate Type C 1 Locks all the doors (P. 109) 2 Unlocks all the doors (P. 109) Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. 3 Sounds the alarm (P.
3-1. Key information Using the mechanical key (type D) To take out the mechanical key, push the release button and take the key out. The mechanical key can only be inserted in one direction, as the key only has grooves on one side. If the key cannot be inserted in a lock cylinder, turn it over and reattempt to insert it. After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key.
3-1. Key information 105 3 Operation of each component ■ When required to leave the vehicle’s key with a parking attendant (type D) Lock the glove box as circumstances demand. (P. 389) Remove the mechanical key for your own use and provide the attendant with the electronic key only. ■ If you lose your keys New genuine key can be made by your Toyota dealer using the other key and the key number stamped on your key number plate. Keep the plate in a safe place such as your wallet, not in the vehicle.
3-1. Key information ■ Key battery depletion (type C or type D) Type C If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (P. 481) Type D ● The standard battery life is 1 to 2 years. ● If the battery becomes low, an alarm will sound in the cabin when the engine stops. (P. 533) ● As the electronic key always receives radio waves, the battery will become depleted even if the electronic key is not used.
3-1. Key information 107 3 Operation of each component ■ Certification for wireless remote control (vehicles without a smart key system) For vehicles sold in U.S.A. and New Caledonia FCC ID: HYQ23AAH FCC ID: HYQ23AAN FCC ID: HYQ12BEL NOTE: This device complies with part 15 of the FCC Rules.
3-1. Key information NOTICE ■ To prevent key damage ● Do not drop the keys, subject them to strong shocks or bend them. ● Do not expose the keys to high temperatures for long periods of time. ● Do not get the keys wet or wash them in an ultrasonic washer, etc. ● Do not attach metallic or magnetic materials to the keys or place the keys close to such materials. ● Do not disassemble the keys. ● Do not attach a sticker or anything else to the surface of the electronic key.
3-2. Opening, closing and locking the doors 109 Doors Unlocking and locking the doors from the outside ◆ Key Vehicles without a smart key system 1 Locks all the doors 2 Unlocks all the doors Turning the key unlocks the driver’s door. Turning the key again unlocks the other doors. 3 Vehicles with a smart key system The doors can also be locked and unlocked with the mechanical key. (P.
3-2. Opening, closing and locking the doors ◆ Smart key system (if equipped) Carry the electronic key to enable this function. 1 Grip the driver’s door handle to unlock the door. Make sure to touch the sensor on the back of the handle. The doors cannot be unlocked for 3 seconds after the doors are locked. 2 Touch the lock sensor (the indentation on the upper part or lower part of the driver’s door handle) to lock the doors. Check that the door is securely locked.
3-2. Opening, closing and locking the doors 111 ■ If the smart key system or the wireless remote control does not operate properly (if equipped) Use the mechanical key to lock and unlock the doors. (P. 555) Replace the battery with a new one if it is depleted. (P.
3-2. Opening, closing and locking the doors Locking the front doors from the outside without a key 1 Move the inside lock button to the lock position. 2 Close the door. Vehicles without a smart key system The door cannot be locked if either of the front doors is open and the key is in the engine switch. Vehicles with a smart key system The door cannot be locked if the engine switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle.
3-2. Opening, closing and locking the doors 113 Rear door child-protector lock (Double Cab models only) The door cannot be opened from inside the vehicle when the lock is set. 1 Unlock 2 Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors. 3 The following functions can be set or canceled: Function Operation Shift position linked door locking Shifting the shift lever out of P locks function all the doors.
3-2. Opening, closing and locking the doors ■ Setting and canceling the functions The automatic door locking and unlocking functions can be set or canceled on the Entune Audio system screen (P. 592) or by following the procedure below. 1 Vehicles without a smart key system: Close all the doors and turn the engine switch to the “ON” position. (Perform step 2 within 10 seconds.) Vehicles with a smart key system: Close all the doors and turn the engine switch to IGNITION ON mode.
3-2. Opening, closing and locking the doors 115 ■ Customization that can be configured at Toyota dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features: P. 592) WARNING NOTICE ■ When opening or closing the front door and access door (Access Cab models only) The front door and access door could be damaged if they hit each other when being opened or closed.
3-2. Opening, closing and locking the doors Tailgate The tailgate can be opened using the tailgate handle. The tailgate can be locked/unlocked using a key. Locking/unlocking the tailgate 1 Unlock the tailgate 2 Lock the tailgate Opening/closing the tailgate 1 Pull the handle 2 Open the tailgate slowly Tailgate will open slowly due to damper. The support cables will hold the tailgate horizontal.
3-2. Opening, closing and locking the doors 117 Removing the tailgate ■ Before removing the tailgate These connector covers are used when removing the tailgate, to prevent the back-up camera wire harness connectors from being contaminated. Connector cover (Gray) Connector cover (White) Store the connector covers in the glove box in a plastic bag when not using. 3 connectors ( depress small connector 1 from connector 1 2 ), and plastic tab on and pull apart 2 .
3-2. Opening, closing and locking the doors 3 Pull out the plastic wire protec- tor located in the vehicle bed by pressing the tabs and pulling the protector. Be careful not to pull out all of the tailgate wire harness. Doing so may result in damage to vehicle components. Plastic wire protector 4 Open the tailgate. 5 Pull out the wire harness from the vehicle bed. 6 Attach the connector cover (Gray) to the tailgate wire harness connector (White).
3-2. Opening, closing and locking the doors 119 ■ Removing the tailgate 1 Open the tailgate to the angle where you can release the brackets on the support cables from the lugs on both sides. Lift the support cable bracket up and slide it off. To unhook the support cable bracket, keep pulling up the clip on the bracket and unhook the bracket.
3-2. Opening, closing and locking the doors Rear step bumper For rear end protection and easier step-up loading. To get on the rear step bumper, use the shaded area in the illustration. WARNING ■ Before removing the tailgate Disconnect the wire harness between the back-up camera and the vehicle. Failure to do so may result in serious personal injury or damage to the vehicle components. ■ Caution while driving Observe the following precautions.
3-2. Opening, closing and locking the doors 121 Smart key system The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. The driver should always carry the electronic key. ● Locks and unlocks the doors (P. 110) ● Starts the engine (P.
3-2. Opening, closing and locking the doors ■ Effective range (areas within which the electronic key is detected) When locking or unlocking the doors The system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the driver’s door handle. (Only the door detecting the key can be operated.) When starting the engine or changing engine switch modes The system can be operated when the electronic key is inside the vehicle.
3-2. Opening, closing and locking the doors Alarm Situation 123 Correction procedure An attempt was made to open the door and exit the vehicle when Shift the shift lever to P. the shift lever was not in P. Interior alarm sounds The engine switch was turned to ACCESSORY continuously mode while the driver’s Turn the engine switch door was open (or the off and close the driver’s door was driver’s door. opened while the engine switch was in ACCESSORY mode). Press twice while pressing and holding .
3-2. Opening, closing and locking the doors ■ Conditions affecting operation The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and engine immobilizer system from operating properly. (Ways of coping: P.
3-2. Opening, closing and locking the doors 125 3 Operation of each component ■ Note for the entry function ● Even when the electronic key is within the effective range (detection areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
3-2. Opening, closing and locking the doors ● The lock sensor may not work properly if it comes into contact with ice, snow, mud, etc. Clean the lock sensor and attempt to operate it again, or use the lock sensor on the lower part of the door handle. ● If there is another electronic key in the detection area, it may take slightly longer to unlock the doors after the door handle is gripped.
3-2. Opening, closing and locking the doors 127 3 Operation of each component ■ Certification for the smart key system For vehicles sold in U.S.A. and New Caledonia FCC ID: HYQ23AAP FCC ID: HYQ14FBA NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3-2. Opening, closing and locking the doors WARNING ■ Caution regarding interference with electronic devices ● People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should keep away from the smart key system antennas. (P. 121) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled.
3-3. Adjusting the seats 129 Front seats Adjustment procedure 3 1 Seat position adjustment lever angle adjustment lever Active head restraints When the occupant’s back presses against the seatback during a rear-end collision, the head restraint moves slightly forward to help reduce the risk of whiplash on the seat occupant.
3-3. Adjusting the seats ■ Active head restraints Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may show the head restraint inner structure. These do not indicate problems. Inner structure During rear-end collision WARNING ■ When adjusting the seat position ● Take care when adjusting the seat position to ensure that other passengers are not injured by the moving seat.
3-3. Adjusting the seats 131 Rear seats Raising the bottom cushion (Access Cab models) 1 Stow the seat belt buckles. This prevents the seat belt buckles from interfering with raising the bottom cushion. 3 2 Raise the bottom cushion up Operation of each component while pulling the lever until it locks. When returning the bottom cushion to its original position, push the bottom cushion down while pulling the lever until the bottom cushion locks into the seat position.
3-3. Adjusting the seats ■ Folding down the rear seats 1 Make sure to slide the front seat forward as much as possible. 2 Remove the head restraints and swing the bottom cushion up by pulling the lock release strap. 3 Attach the head restraints to the holders located on the back sides of the bottom cushions. Installing the head restrains in the following manner: Outer head restraints: The front of the head restraint facing rearward.
3-3. Adjusting the seats 133 WARNING NOTICE ■ Stowing the seat belts The seat belts and the buckles must be stowed before you raise the bottom cushion or fold down the rear seatbacks. 3 Operation of each component ■ When raising the bottom cushion or fold the seatbacks down Observe the following precautions. Failure to do so may result in death or serious injury.
3-3. Adjusting the seats Head restraints Head restraints are provided for all seats. Front seats Vertical adjustment 1 Up Pull the head restraints up. 2 Down Push the head restraint down while pressing the lock release button. Lock release button Rear seats Access Cab models Folding the head restraints 1 To use Lift up the head restraint until it locks. 2 To fold Pull the head restraint lock release lever to fold the head restraint.
3-3. Adjusting the seats 135 Double Cab models Folding the head restrains (outer head restraints) 1 To use Lift up and push down the head restraint to the lowest lock position. 2 To fold Pull the head restraint up while pressing the lock release buttons. Lock release button Vertical adjustment (center head restraint) 1 Up 3 Push the head restraint down while pressing the lock release button. Lock release button Operation of each component Pull the head restraints up.
3-3. Adjusting the seats ■ Removing the head restraints Front seats Pull the head restraint up while pressing the lock release button. Lock release button Rear seats (Double Cab models only) Outer head restraints: Pull the head restraint up while pressing the both lock release buttons. Center head restraints: Pull the head restraint up while pressing the lock release button.
3-3. Adjusting the seats 137 ■ Adjusting the height of the head restraints Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears. ■ Adjusting the rear center seat head restraint (Double Cab models only) Always raise the head restraint one level from the stowed position when using. WARNING Operation of each component ■ Head restraint precautions Observe the following precautions regarding the head restraints.
3-4. Adjusting the steering wheel and mirrors Steering wheel Adjustment procedure 1 Hold the steering wheel and push the lever down. 2 Adjust to the ideal position by moving the steering wheel horizontally and vertically. After adjustment, pull the lever up to secure the steering wheel. Horn To sound the horn, press on or close to the mark. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked.
3-4. Adjusting the steering wheel and mirrors 139 WARNING ■ Caution while driving Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury. ■ After adjusting the steering wheel Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors Inside rear view mirror The rear view mirror’s position can be adjusted to enable sufficient confirmation of the rear view. Adjusting the height of rear view mirror The height of the rear view mirror can be adjusted to suit your driving posture. Adjust the height of the rear view mirror by moving it up and down.
3-4. Adjusting the steering wheel and mirrors 141 Auto anti-glare inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Type A Type B 3 On/off When the automatic anti-glare function is in on mode, the indicator illuminates. Vehicles without a smart key system: The function will set to on mode each time the engine switch is turned to the “ON” position. Pressing the button turns the function to off mode.
3-4. Adjusting the steering wheel and mirrors ■ To prevent sensor error (vehicles with auto anti-glare inside rear view mirror) To ensure that the sensors operate properly, do not touch or cover them. WARNING Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
3-4. Adjusting the steering wheel and mirrors 143 Outside rear view mirrors Adjustment procedure 1 To select a mirror to adjust, turn the switch. 1 Left 2 Right 2 To adjust the mirror, press the 1 Up 2 Right 3 Down 4 Left Folding the mirrors Push the mirror back in the direction of the vehicle’s rear. Operation of each component switch.
3-4. Adjusting the steering wheel and mirrors ■ Mirror angle can be adjusted when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The engine switch is in ACCESSORY or IGNITION ON mode. ■ When the mirrors are fogged up Turn on the mirror defoggers to defog the mirrors. (P. 372, 379) WARNING ■ Important points while driving Observe the following precautions while driving.
3-5. Opening, closing the windows and moon roof 145 Power windows Opening and closing procedures The power windows can be opened and closed using the switches.
3-5. Opening, closing the windows and moon roof ■ The power windows can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The engine switch is in IGNITION ON mode. ■ Operating the power windows after turning the engine off Vehicles without a smart key system The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position.
3-5. Opening, closing the windows and moon roof 147 WARNING 3 Operation of each component Observe the following precautions. Failure to do so may result in death or serious injury. ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows.
3-5. Opening, closing the windows and moon roof Back window (vehicles with sliding type) Opening and closing Open/close Push the lock release lever and slide the back window. ■ Closing the back window Make sure that the back window is securely closed after closing it. WARNING ■ Caution while driving Keep the back window closed. This not only keeps personal belongings from being thrown out, but also prevents exhaust gases from entering the vehicle.
3-5. Opening, closing the windows and moon roof 149 Moon roof Use the overhead switches to open and close the moon roof and tilt it up and down. Opening and closing 1 Opens the moon roof * 2 Closes the moon roof * *: Lightly press either way of the moon roof switch to stop the moon roof partway. 3 Operation of each component Tilting up and down 1 Tilts the moon roof up* 2 Tilts the moon roof down* *: Lightly press either way of the moon roof switch to stop the moon roof partway.
3-5. Opening, closing the windows and moon roof ■ The moon roof can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The engine switch is in IGNITION ON mode. ■ Operating the moon roof after turning the engine off Vehicles without a smart key system The moon roof can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position.
3-5. Opening, closing the windows and moon roof 151 ■ When the moon roof does not close normally Perform the following procedure: ● If the moon roof closes but then re-opens slightly 1 Stop the vehicle. 2 Press and hold the “CLOSE” (sliding close) switch.*1 The moon roof will close, reopen and pause for approximately 10 seconds.*2 Then it will close again, tilt up and pause for approximately 1 second. Finally, it will tilt down, open and close.
3-5. Opening, closing the windows and moon roof ■ When the battery is disconnected The moon roof must be initialized in order to ensure proper operation. 1 Push and hold the switch toward the “UP” (tilt up) side or “CLOSE” (sliding close) side. 2 After the moon roof will tilt up and down, release the switch. 3 To ensure the initialization is complete, make sure automatic opening and closing functions work properly. ■ Customization that can be configured at Toyota dealer Settings (e.g.
Driving 4-1. Before driving Driving the vehicle............. 154 Cargo and luggage ........... 163 Vehicle load limits ............. 167 Trailer towing..................... 168 Dinghy towing ................... 186 4-2. Driving procedures Engine (ignition) switch (vehicles without a smart key system)........ 187 Engine (ignition) switch (vehicles with a smart key system)..................... 190 Automatic transmission ..... 195 Manual transmission ......... 199 Turn signal lever................
4-1. Before driving Driving the vehicle The following procedures should be observed to ensure safe driving: Starting the engine P. 187, 190 Driving Automatic transmission 1 With the brake pedal depressed, shift the shift lever to D. (P. 195) 2 Release the parking brake. (P. 202) 3 Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle. Manual transmission 1 With the clutch pedal fully depressed, shift the shift lever to 1. (P.
4-1. Before driving 155 Parking the vehicle Automatic transmission 1 With the shift lever in D, depress the brake pedal. 2 Set the parking brake. (P. 202) 3 Shift the shift lever to P. (P. 195) 4 Vehicles without a smart key system: Turn the engine switch to the “LOCK” position to stop the engine. Vehicles with a smart key system: Press the engine switch to stop the engine. 5 Lock the door, making sure that you have the key on your person. If parking on a hill, block the wheels as needed.
4-1. Before driving ■ When starting off on an uphill (vehicles with the hill-start assist control system) The hill-start assist control will activate. (P. 265) ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the windows may become fogged-up, and the road will be slippery. ● Drive carefully when it starts to rain, because the road surface will be especially slippery.
4-1. Before driving 157 ■ When turning off the engine The emission system operating sounds may continue for a short time after the engine is turned off. This is not a malfunction, and helps to ensure optimal performance of the emission system. WARNING 4 Driving Observe the following precautions. Failure to do so may result in death or serious injury. ■ When starting the vehicle (vehicles with an automatic transmission) Always keep your foot on the brake pedal while stopped with the engine running.
4-1. Before driving WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When driving the vehicle ● Do not drive in excess of the speed limit. Even if the legal speed limit permits it, do not drive over 85 mph (140 km/h) unless your vehicle has highspeed capability tires. Driving over 85 mph (140 km/h) may result in tire failure, loss of control and possible injury.
4-1. Before driving 159 WARNING 4 Driving ■ If you hear a squealing or scraping noise (brake pad wear limit indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or those of the brake discs are exceeded. ■ When the vehicle is stopped ● Do not race the engine.
4-1. Before driving WARNING ● Do not leave a door or window open if the curved glass is coated with a metallized film such as a silver-colored one. Reflected sunlight may cause the glass to act as a lens, causing a fire. ● Always apply the parking brake, shift the shift lever to P (automatic transmission only), stop the engine and lock the vehicle. Do not leave the vehicle unattended while the engine is running.
4-1. Before driving 161 NOTICE 4 Driving ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain the engine output. Vehicles with an automatic transmission ● Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill. Vehicles with a manual transmission ● Do not shift gears unless the clutch pedal is fully depressed.
4-1. Before driving NOTICE ■ If you get a flat tire while driving A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually depress the brake pedal to slow down the vehicle. ● It may be difficult to control your vehicle. ● The vehicle will make abnormal sounds or vibrations. ● The vehicle will lean abnormally. Information on what to do in case of a flat tire (P.
4-1. Before driving 163 Cargo and luggage Take notice of the following information about storage precautions, cargo capacity and load: ● Stow cargo and luggage in the rear deck whenever possible. ● Be sure all items are secured in place. ● Be careful to keep the vehicle level. Placing the weight as far forward as possible helps maintain vehicle balance. ● For better fuel economy, do not carry unnecessary weight.
4-1. Before driving Capacity and distribution Cargo capacity depends on the total weight of the occupants. (Cargo capacity) = (Total load capacity) (Total weight of occupants) Steps for Determining Correct Load Limit — (1) Locate the statement “The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.” on your vehicle’s placard. (2) Determine the combined weight of the driver and passengers that will be riding in your vehicle.
4-1. Before driving 165 Calculation formula for your vehicle 1 Cargo capacity 2 Total load capacity (vehicle capacity weight) (P. 567) When 2 people with the combined weight of A lb. (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb. (kg), the available amount of cargo and luggage load capacity will be C lb. (kg) as follows: B*2 lb. (kg) A*1 lb. (kg) = C*3 lb. (kg) In this condition, if 3 more passengers with the combined weight of D lb.
4-1. Before driving WARNING ■ Things that must not be carried in the luggage compartment The following things may cause a fire if loaded in the luggage compartment: ● Receptacles containing gasoline ● Aerosol cans ■ Storage precautions Observe the following precautions. Failure to do so may prevent the pedals from being depressed properly, may block the driver’s vision, or may result in items hitting the driver or passengers, possibly causing an accident.
4-1. Before driving 167 Vehicle load limits Vehicle load limits include total load capacity, seating capacity, TWR (Trailer Weight Rating) and cargo capacity. ◆ Total load capacity (vehicle capacity weight): P. 567 Total load capacity means the combined weight of occupants, cargo and luggage.
4-1. Before driving Trailer towing Your vehicle is designed primarily as a passenger-and-load-carrying vehicle. Towing a trailer can have an adverse impact on handling, performance, braking, durability, and fuel consumption. For your safety and the safety of others, you must not overload your vehicle or trailer.
4-1. Before driving 169 Towing related terms ■ GCWR (Gross Combination Weight Rating) The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (including the occupants, cargo and any optional equipment installed on the vehicle) and the weight of the trailer being towed (including the cargo in the trailer). ■ GVWR (Gross Vehicle Weight Rating) The maximum allowable gross vehicle weight. The gross vehicle weight is the total weight of the vehicle.
4-1. Before driving ■ TWR (Trailer Weight Rating) The maximum allowable gross trailer weight. The gross trailer weight is the sum of the trailer weight and the weight of the cargo in the trailer. (With brakes) TWR is calculated assuming base vehicle with one driver, one front passenger, towing package (if available), hitch and hitch systems (if required). Additional optional equipment, passengers and cargo in the vehicle will reduce the trailer weight rating so as not to exceed GCWR, GVWR and GAWR.
4-1. Before driving 171 Weight limits ● The gross trailer weight must never exceed the TWR described in the table. (P. 172) ● The gross combination weight must never exceed the GCWR described in the table. (P. 172) ● The gross vehicle weight must never exceed the GVWR indicated on the Certification Label. ● The gross axle weight on each axle must never exceed the GAWR indicated on the Certification Label.
4-1. Before driving GCWR, TWR, Unbraked TWR, Fifth wheel and Gooseneck towing TWR Confirm that the gross trailer weight, gross combination weight, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR* and TWR* Access Cab models Model code*1 Engine TRN265L-CRTSKA TRN245L-CRMSKA 2TR-FE engine Driving system GCWR TWR 2WD 7810 lb. (3540 kg) 3500 lb. (1590 kg) 8020 lb. (3635 kg) 3500 lb. (1590 kg) 8050 lb. (3650 kg) 3500 lb. (1590 kg) 7890 lb.
4-1. Before driving Double Cab models Model code*1 Engine TRN265L-PRTSKA 2TR-FE engine Driving system GRN325L-PRTSHA GRN325L-PRTLHA 2GR-FKS engine GRN330L-PRTSHA TWR 7920 lb. (3590 kg) 3500 lb. (1590 kg) 8010 lb.*2 (3630 kg) 3500 lb.*2 (1590 kg) 11330 lb.*3 (5135 kg) 6700 lb.*3 (3040 kg) 8060 lb.*2 (3655 kg) 3500 lb.*2 (1590 kg) 11280 lb.*3 (5115 kg) 6600 lb.*3 (2995 kg) 8060 lb.*2 (3655 kg) 3500 lb.*2 (1590 kg) 11280 lb.*3 (5115 kg) 6600 lb.*3 (2995 kg) 8110 lb.
4-1. Before driving Model code*1 Engine Driving system GRN305L-PRFSHA GRN305L-PRTSHA GRN305L-PRTLHA 2GR-FKS engine 4WD GRN310L-PRTSHA GRN310L-PRTLHA GCWR TWR 8270 lb.*2 (3750 kg) 3500 lb.*2 (1590 kg) 11300 lb.*3 (5125 kg) 6400 lb.*3 (2900 kg) 8250 lb.*2 (3740 kg) 3500 lb.*2 (1590 kg) 11280 lb.*3 (5115 kg) 6400 lb.*3 (2900 kg) 8310 lb.*2 (3765 kg) 3500 lb.*2 (1590 kg) 11330 lb.*3 (5135 kg) 6400 lb.*3 (2900 kg) 8310 lb.*2 (3765 kg) 3500 lb.*2 (1590 kg) 11330 lb.
4-1. Before driving 175 Trailer Tongue Weight ● A recommended tongue weight or kingpin weight varies in accordance with the types of trailers or towing as described below. ● To ensure the recommended values shown below, the trailer must be loaded by referring to the following instructions. • Tongue Weight The gross trailer weight should be distributed so that the tongue weight is 9% to 11%.
4-1. Before driving Hitch Trailer hitch assemblies have different weight capacities. Toyota recommends the use of Toyota hitch/bracket for your vehicle. For details, contact your Toyota dealer. ● If you wish to install a trailer hitch, contact your Toyota dealer. ● Use only a hitch that conforms to the gross trailer weight requirement of your vehicle. ● Follow the directions supplied by the hitch manufacturer. ● Lubricate the hitch ball and kingpin with a light coating of grease.
4-1. Before driving Selecting trailer ball Use the correct trailer ball for your application. 1 Trailer ball load rating Matches or exceeds the gross trailer weight rating of the trailer. 2 Ball diameter Matches the size of the trailer coupler. Most couplers are stamped with the required trailer ball size. Trailer class Typical trailer ball size IV II and III I 2 5/16 in. 2 in. 1 7/8 in. 3 Shank length 4 Shank diameter Matches the ball mount hole diameter size.
4-1. Before driving Connecting trailer lights Use the wire harness stored in the rear end of the vehicle. ■ Service connector for towing brake controller (vehicles with a towing package) Your vehicle is equipped with a service connector for the trailer brake controller as shown.
4-1. Before driving 179 Trailer towing tips 4 Driving Your vehicle will handle differently when towing a trailer. To help avoid an accident, death or serious injury, keep the following in mind when towing: ● Speed limits for towing a trailer vary by state or province. Do not exceed the posted towing speed limit. ● Toyota recommends that the vehicle-trailer speed limit is 65 mph (104 km/h) on a flat, straight, dry road.
4-1. Before driving ● Slow down before making a turn, in crosswinds, on wet or slippery surfaces, etc. Increasing vehicle speed can destabilize the trailer. ● Take care when passing other vehicles. Passing requires considerable distance. After passing a vehicle, do not forget the length of your trailer, and be sure you have plenty of room before changing lanes.
4-1. Before driving 181 ● Always place wheel blocks under both the vehicle’s and the trailer’s wheels when parking. Apply the parking brake firmly, and put the transmission in P (automatic transmission) or in 1 or R (manual transmission). Avoid parking on a slope, but if unavoidable, do so only after performing the following: 1 Apply the brakes and keep them applied. 2 Have someone place wheel blocks under both the vehicle’s and trailer’s wheels.
4-1. Before driving ■ Matching trailer ball height to trailer coupler height No matter which class of tow hitch applies, for a more safe trailer hookup, the trailer ball setup must be the proper height for the coupler on the trailer. 1 Coupler 2 Trailer ball ■ Before towing Check that the following conditions are met: ● Ensure that your vehicle’s tires are properly inflated. (P. 577) ● Trailer tires are inflated according to the trailer manufacturer’s recommendation.
4-1. Before driving 183 4 Driving ■ Break-in schedule If your vehicle is new or equipped with any new power train components (such as an engine, transmission, differential or wheel bearing), Toyota recommends that you do not tow a trailer until the vehicle has been driven for over 500 miles (800 km). After the vehicle has been driven for over 500 miles (800 km), you can start towing.
4-1. Before driving WARNING ■ Trailer towing precautions To tow a trailer safely, use extreme care and drive the vehicle in accordance with the trailer’s characteristics and operating conditions. Failure to do so could cause an accident resulting in death or serious injury. Vehicle stability and braking performance are affected by trailer stability, brake setting and performance, and the hitch. Your vehicle will handle differently when towing a trailer.
4-1. Before driving 185 WARNING NOTICE ■ When installing a trailer hitch Use only the position recommended by your Toyota dealer. Do not install the trailer hitch on the bumper; this may cause body damage. ■ Do not directly splice trailer lights Do not directly splice trailer lights. Directly splicing trailer lights may damage your vehicle’s electrical system and cause a malfunction. 4 Driving ■ Hitch Trailer hitch assemblies have different weight capacities established by the hitch manufacturer.
4-1. Before driving Dinghy towing Your vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ To avoid serious damage to your vehicle Do not tow your vehicle with the four wheels on the ground.
4-2. Driving procedures 187 Engine (ignition) switch (vehicles without a smart key system) Starting the engine Automatic transmission 1 Check that the parking brake is set. 2 Check that the shift lever is set in P. 3 Firmly depress the brake pedal. 4 Turn the engine switch to the “START” position to start the engine. Manual transmission 1 Check that the parking brake is set. 2 Check that the shift lever is set in N. 3 Firmly depress the clutch pedal.
4-2. Driving procedures ■ Turning the key from “ACC” to “LOCK” 1 Shift the shift lever to P (automatic transmission) or N (manual transmission). 2 Push in the key and turn it to the “LOCK” position. ■ If the engine does not start (vehicles with engine immobilizer system) The engine immobilizer system may not have been deactivated. (P. 69) Contact your Toyota dealer. ■ When the steering lock cannot be released When starting the engine, the engine switch may seem stuck in the “LOCK” position.
4-2. Driving procedures 189 WARNING ■ When starting the engine Always start the engine while sitting in the driver’s seat. Do not depress the accelerator pedal while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury. ■ Caution while driving Do not turn the engine switch to the “LOCK” position while driving.
4-2. Driving procedures Engine (ignition) switch (vehicles with a smart key system) Performing the following operations when carrying the electronic key on your person starts the engine or changes engine switch modes. Starting the engine 1 Check that the parking brake is set. 2 Check that the shift lever is in P. 3 Firmly depress the brake pedal. and a message will be displayed on the multi-information display. If it is not displayed, the engine cannot be started. 4 Press the engine switch.
4-2. Driving procedures 191 Changing engine switch modes Modes can be changed by pressing the engine switch with brake pedal released. (The mode changes each time the switch is pressed.) 1 Off* The emergency flashers can be used. 2 ACCESSORY mode Some electrical components such as the audio system can be used. “ACCESSORY” will be displayed on the multi-information display. 3 IGNITION ON mode All electrical components can be used. “IGNITION ON” will be displayed on the multi-information display.
4-2. Driving procedures ■ Auto power off function If the vehicle is left in ACCESSORY mode for more than 20 minutes or IGNITION ON mode (the engine is not running) for more than an hour with the shift lever in P, the engine switch will automatically turn off. However, this function cannot entirely prevent battery discharge. Do not leave the vehicle with the engine switch in ACCESSORY or IGNITION ON mode for long periods of time when the engine is not running. ■ Electronic key battery depletion P.
4-2. Driving procedures 193 ■ When “Smart Entry & Start System Check” is displayed on the multiinformation display The system may be malfunctioning. Have the vehicle inspected by your Toyota dealer immediately. ■ If the electronic key battery is depleted P. 481 ■ Operation of the engine switch ● When operating the engine switch, one short, firm press is enough. If the switch is pressed improperly, the engine may not start or the engine switch mode may not change.
4-2. Driving procedures NOTICE ■ To prevent battery discharge ● Do not leave the engine switch in ACCESSORY or IGNITION ON mode for long periods of time without the engine running. ● If “ACCESSORY” or “IGNITION ON” is displayed on the multi-information display while the engine is not running, the engine switch is not off. Exit the vehicle after turning the engine switch off. ● Do not stop the engine when the shift lever is in a position other than P.
4-2. Driving procedures 195 Automatic transmission Shifting the shift lever 4 While the engine switch is in the “ON” position, move the shift lever with the brake pedal depressed. When shifting the shift lever between P and D, make sure that the vehicle is completely stopped. Vehicles with a smart key system: While the engine switch is in IGNITION ON mode, move the shift lever with the brake pedal depressed.
4-2. Driving procedures Shift position purpose Shift position Function P Parking the vehicle/starting the engine R Reversing N Neutral (Condition in which the power is not transmitted) D Normal driving*1 S S mode driving*2 (P. 197) *1: To improve fuel efficiency and reduce noises, set the shift lever in the D position for normal driving.
4-2. Driving procedures 197 Selecting shift ranges in the S position When the shift lever is in the S position, the shift lever can be operated as follows: 1 Upshifting 2 Downshifting 4 Driving The initial shift range in S mode is set automatically to 5 or 4 according to vehicle speed. However, the initial shift range may be set to 3 if the AI-SHIFT has operated while the shift lever was in the D position. (P.
4-2. Driving procedures ■ AI-SHIFT AI-SHIFT automatically selects the suitable gear according to the driver performance and driving conditions. AI-SHIFT automatically operates when the shift lever is in the D position. (Shifting the shift lever to the S position cancels the function.
4-2. Driving procedures 199 Manual transmission Shifting the shift lever 5-speed models 4 6-speed models Fully depress the clutch pedal before operating the shift lever, and then release it slowly. : If equipped Driving Fully depress the clutch pedal before operating the shift lever, and then release it slowly.
4-2. Driving procedures ■ Maximum allowable speed Observe the following maximum allowable speeds in each gear when maximum acceleration is necessary.
4-2. Driving procedures 201 Turn signal lever Operating instructions 1 Right turn 2 Lane change to the right (move the lever partway and release it) The right hand signals will flash 3 times. 3 Lane change to the left (move the lever partway and release it) The left hand signals will flash 3 times. 4 Left turn 4 Driving ■ Turn signals can be operated when Vehicles without a smart key system The engine switch is in the “ON” position.
4-2. Driving procedures Parking brake 1 To set the parking brake, fully pull the parking brake lever while depressing the brake pedal. U.S.A. Canada 2 To release the parking brake, slightly raise the lever and lower it completely while pressing the button. ■ Usage in winter time P. 271 NOTICE ■ Before driving Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.
4-3. Operating the lights and wipers 203 Headlight switch The headlights can be operated manually or automatically. Operating instructions Turning the end of the lever turns on the lights as follows: Type A 1 2 The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on. (U.S.A.) (Canada) 3 The headlights, daytime running lights (P. 205) and all the lights listed above turn on and off automatically.
4-3. Operating the lights and wipers Type B 1 The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on. 2 The headlights and all lights listed above (except daytime running lights) turn on. 3 The daytime running lights turn on. (P. 205) 4 Off Type C 1 The side marker, parking, tail, license plate, daytime running lights and instrument panel lights turn on.
4-3. Operating the lights and wipers 205 Turning on the high beam headlights 1 With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off. 2 Pull the lever toward you and release it to flash the high beams once. You can flash the high beams with the headlights on or off.
4-3. Operating the lights and wipers ■ Automatic light off system When the light switch is in or : The lights turn off 30 seconds after the engine switch is turned to the “LOCK” position (vehicles without a smart key system) or off (vehicles with a smart key system) and a door is opened and all of the doors are closed. (Vehicles with a wireless remote control function: The lights turn off immediately if on the key is pressed while all the doors are locked.
4-3. Operating the lights and wipers 207 Fog light switch The fog lights secure excellent visibility in difficult driving conditions, such as in rain and fog. 1 (U.S.A.) or (Canada) Turns the front fog lights off 2 Turns the front fog lights on 4 Driving ■ Fog lights can be used when The parking lights are on or the headlights are on in low beam.
4-3. Operating the lights and wipers Windshield wipers and washer Operating the wiper lever Operate the lever as follows to operate the wipers. Vehicles without intermittent type 1 (U.S.A.) or Off 2 (U.S.A.) or (Canada) Low speed windshield wiper operation 3 (U.S.A.) or (Canada) High speed windshield wiper operation 4 (U.S.A.
4-3. Operating the lights and wipers 209 Vehicles with intermittent type 1 (U.S.A.) or Off 2 (U.S.A.) or (Canada) Intermittent windshield wiper operation 3 (U.S.A.) or (Canada) Low speed windshield wiper operation 4 (U.S.A.) or (Canada) High speed windshield wiper operation 5 (U.S.A.
4-3. Operating the lights and wipers ■ The windshield wipers and washer can be operated when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The engine switch is in IGNITION ON mode. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir.
4-4. Refueling 211 Opening the fuel tank cap Perform the following steps to open the fuel tank cap: Before refueling the vehicle ● Vehicles without a smart key system: Turn the engine switch to the “LOCK” position and ensure that all the doors and windows are closed. ● Vehicles with a smart key system: Turn the engine switch off and ensure that all the doors and windows are closed. ● Confirm the type of fuel. ■ Fuel types P.
4-4. Refueling WARNING ■ When refueling the vehicle Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ● After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity. It is important to discharge static electricity before refueling, because sparks resulting from static electricity can cause fuel vapors to ignite while refueling.
4-4. Refueling 213 Opening the fuel tank cap 1 Open the fuel filler door. 4 open. Closing the fuel tank cap After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
4-4. Refueling ■ Fuel tank opening for unleaded gasoline To help prevent incorrect fueling, your vehicle has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. WARNING ■ When replacing the fuel tank cap Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Otherwise, doing so may cause a fire or other incident which may result in death or serious injury.
4-5. Using the driving support systems 215 Cruise control Summary of functions Use the cruise control to maintain a set speed without depressing the accelerator pedal.
4-5. Using the driving support systems Setting the vehicle speed 1 Press the “ON-OFF” button to activate the cruise control. Cruise control indicator will come on*. Press the button again to deactivate the cruise control. 2 Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed. “SET” indicator will come on*. The vehicle speed at the moment the lever is released becomes the set speed.
4-5. Using the driving support systems 217 Adjusting the set speed To change the set speed, operate the lever until the desired set speed is obtained. 1 Increases the speed 2 Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. Large adjustment: Hold the lever in the desired direction. The set speed will be increased or decreased as follows: Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is operated.
4-5. Using the driving support systems ■ Cruise control can be set when ● Vehicles with an automatic transmission: The shift lever is in D or range 4 or higher of S has been selected. ● Vehicle speed is above approximately 25 mph (40 km/h). ■ Accelerating after setting the vehicle speed ● The vehicle can be accelerated normally. After acceleration, the set speed resumes.
4-5. Using the driving support systems 219 WARNING ■ To avoid operating the cruise control by mistake Switch the cruise control off using the “ON-OFF” button when not in use. ■ Situations unsuitable for cruise control Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury.
4-5. Using the driving support systems Intuitive parking assist The distance from your vehicle to nearby obstacles when parallel parking or maneuvering into a garage is measured by the sensors and communicated via the multi-information display and buzzer. Always check the surrounding area when using this system.
4-5. Using the driving support systems 221 The distance display and buzzer When the sensor detects an obstacle, the direction of and the approximate distance to the obstacle are displayed and the buzzer sounds. ■ Intuitive parking assist display 1 Rear corner sensor operation 2 Rear center sensor operation ■ Sensor operation and distance to an obstacle The system operates when the vehicle approaches an obstacle, as shown by the following table.
4-5. Using the driving support systems ■ When multiple obstacles are detected in front and behind the vehicle at the same time The buzzer will change in the following manner. ● If an obstacle has been detected within 1.5 ft. (45 cm) of the front or 2.8 ft. (85 cm) in rear of the vehicle (a continuous buzzer is sounding), and a new obstacle is detected at the other end of the vehicle, the buzzer will sound 7 times then 1 continuous buzzer. ● If an obstacle has been detected within 1.5 ft.
4-5. Using the driving support systems 223 4 Driving ■ The intuitive parking assist can be operated when Vehicles without a smart key system The engine switch is in the “ON” position and the shift lever is in R. Vehicles with a smart key system The engine switch is in IGNITION ON mode and the shift lever is in R. ■ Sensor detection information ● The sensor’s detection areas are limited to the areas around the vehicle’s rear bumper.
4-5. Using the driving support systems ● The shape of the obstacle may prevent the sensor from detecting it. Pay particular attention to the following obstacles: • Wires, fences, ropes, etc. • Cotton, snow and other materials that absorb sound waves • Sharply-angled objects • Low obstacles • Tall obstacles with upper sections projecting outwards in the direction of your vehicle ● The following situations may occur during use.
4-5. Using the driving support systems 225 WARNING ■ When using the intuitive parking assist Observe the following precautions. Failure to do so may result in the vehicle being unable to be driven safely and possibly cause an accident. ● Do not use the sensor at speeds in excess of 6 mph (10 km/h). ● The sensors’ detection areas and reaction times are limited.
4-5. Using the driving support systems Rear view monitor system The rear view monitor system assists the driver by displaying an image of the view behind the vehicle with fixed guide lines on the screen while backing up, for example while parking. The screen illustrations used in this text are intended as examples, and may differ from the image that is actually displayed on the screen. Vehicles with Entune Audio Plus or Entune Premium Audio (Audio system types: P.
4-5. Using the driving support systems 227 Using the rear view monitor system ■ Screen description 1 Vehicle width guide lines The line indicates a guide path when the vehicle is being backed straight up. The displayed width is wider than the actual vehicle width. 4 2 Vehicle center guide line The line shows distance behind the vehicle, a point approximately 1.5 ft. (0.5 m) (red) from the edge of the bumper. 4 Distance guide line The line shows distance behind the vehicle, a point approximately 3 ft.
4-5. Using the driving support systems Rear view monitor system precautions ■ Area displayed on screen The rear view monitor system displays an image of the view from the bumper of the rear area of the vehicle. The image adjustment procedure for the rear view monitor system screen is the same as the procedure for adjusting the multimedia screen.(P. 292) • The area displayed on the screen may vary according to vehicle orientation conditions.
4-5. Using the driving support systems 229 ● Using the camera If dirt or foreign matter (such as water droplets, snow, mud, etc.) is adhering to the camera, it cannot transmit a clear image. In this case, flush it with a large quantity of water and wipe the camera lens clean with a soft and wet cloth.
4-5. Using the driving support systems ● When the ground behind the vehicle slopes down sharply The distance guide lines will appear to be farther from the vehicle than the actual distance. Because of this, objects will appear to be closer than they actually are. In the same way, there will be a margin of error between the guide lines and the actual distance/course on the road.
4-5. Using the driving support systems 231 ● Distance guidelines Visually check the surroundings and the area behind the vehicle. On the screen, it appears that a truck is parked at point 2 . However, in reality if you back up to point 1 , you will hit the truck. On the screen, it appears that 1 is closest and 3 is farthest away. However, in reality, the distance to 1 and 3 is the same, and 2 is farther than 1 and 3 .
4-5. Using the driving support systems ■ Vehicle width guide lines Visually check the surroundings and the area behind the vehicle. In the case shown below, the truck appears to be outside of the vehicle width guide lines and the vehicle does not look as if it hits the truck. However, the rear body of the truck may actually cross over the vehicle width guide lines. In reality if you back up as guided by the vehicle width guide lines, the vehicle may hit the truck.
4-5. Using the driving support systems 233 Things you should know ■ If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved by the solution, have the vehicle inspected by your Toyota dealer. Likely cause Solution The image is difficult to see Back up while visually checking the vehicle’s surroundings. (Use the monitor again once conditions have been improved.
4-5. Using the driving support systems WARNING ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to visually check all around the vehicle both directly and using the mirrors before proceeding. Observe the following precautions to avoid an accident that could result in death or serious injuries. ● Never depend on the rear view monitor system entirely when backing up.
4-5. Using the driving support systems 235 NOTICE 4 Driving ■ How to use the camera ● The rear view monitor system may not operate properly in the following cases. • If the back of the vehicle is hit, the position and mounting angle of the camera may change. • As the camera has a water proof construction, do not detach, disassemble or modify it. This may cause incorrect operation. • When cleaning the camera lens, flush the camera with a large quantity of water and wipe it with a soft and wet cloth.
4-5. Using the driving support systems BSM (Blind Spot Monitor) Summary of the Blind Spot Monitor The Blind Spot Monitor is a system that has 2 functions; ● The Blind Spot Monitor function Assists the driver in making the decision when changing lanes ● The Rear Cross Traffic Alert function Assists the driver when backing up These functions use same sensors. 1 BSM main switch Pressing the switch turns the system on or off.
4-5. Using the driving support systems 237 3 Rear Cross Traffic Alert buzzer (Rear Cross Traffic Alert function only) When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the left-hand rear pillar. 4 Driving ■ The outside rear view mirror indicators visibility When under strong sunlight, the outside rear view mirror indicator may be difficult to see.
4-5. Using the driving support systems Droit applicable : Canada 310 Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) I’appareil ne doit pas produire de brouillage, et (2) I’utilisateur de I’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le founctionnement. Bandes de fréquences : 24.05 – 24.
4-5. Using the driving support systems 239 The Blind Spot Monitor function detection areas The areas that vehicles can be detected in are outlined below. The range of the detection area extends to: 1 Approximately 11.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ft. (0.5 m) from the side of the vehicle is not in the detection area 2 Approximately 9.8 ft. (3 m) from the rear bumper 3 Approximately 3.3 ft.
4-5. Using the driving support systems ■ The Blind Spot Monitor function is operational when ● The BSM main switch is set to on. ● Vehicle speed is greater than approximately 10 mph (16 km/h) ■ The Blind Spot Monitor function will detect a vehicle when ● A vehicle in an adjacent lane overtakes the vehicle. ● Another vehicle enters the detection area when it changes lanes.
4-5. Using the driving support systems 241 ● Instances of the Blind Spot Monitor function unnecessarily detecting a vehicle and/or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guardrail, wall, etc.
4-5. Using the driving support systems WARNING ■ Cautions regarding the use of the system The driver is solely responsible for safe driving. Always drive safely, taking care to observe your surroundings. The Rear Cross Traffic Alert function is only an assist and is not a replacement for careful driving. Driver must be careful when backing up, even when using Rear Cross Traffic Alert function.
4-5. Using the driving support systems 243 ■ The Rear Cross Traffic Alert function is operational when ● The BSM main switch is set to on. ● The shift lever is in R. ● Vehicle speed is less than approximately 5 mph (8 km/h). ● Approaching vehicle speed is between approximately 5 mph (8 km/h) and 18 mph (28 km/h).
4-5. Using the driving support systems Four-wheel drive system Summary of functions Use the front-wheel drive control switch to select the following transfer modes: 1 “2WD” (high speed position, two-wheel drive) Use this for normal driving on dry hard-surfaced roads. This position gives greater economy, quietest ride and least wear. 2 “4H” (high speed position, four-wheel drive) Use this for driving only on tracks that permit the tires slide, like off-road, icy or snow-covered roads.
4-5. Using the driving support systems 245 Shifting between “2WD” and “4H” ■ Shifting from “2WD” to “4H” 1 Reduce vehicle speed to less than 62 mph (100 km/h). 2 Turn the front-wheel drive control switch to “4H”. The four-wheel drive indicator will come on. ■ Shifting from “4H” to “2WD” Turn the front-wheel drive control switch to “2WD”. This can be done at any speed. You need not depress the clutch pedal. (manual transmission only) The four-wheel drive indicator will go off.
4-5. Using the driving support systems ■ Shifting from “4L” to “4H” Automatic transmission 1 Stop the vehicle completely and continue to depress the brake pedal. 2 Shift the shift lever to N. 3 Push and turn the front-wheel drive control switch to “4H”. The “4LO” indicator will go off. If the four-wheel drive indicator flashes and the buzzer sounds, try the above steps again. Manual transmission 1 Stop the vehicle or reduce your speed to less than 2 mph (3 km/h).
4-5. Using the driving support systems 247 WARNING ■ Caution while driving ● Never shift the front-wheel drive control switch from “2WD” to “4H” if the wheels are slipping. Stop the slipping or spinning before shifting. ● For normal driving on dry and hard surface roads, use “2WD” position. Driving on dry and hard surface roads in “4H” or “4L” position may cause drive component oil leakage, seizure, or other problems resulting in an accident. Further, it may cause tire wear and increased fuel consumption.
4-5. Using the driving support systems AUTO LSD system The AUTO LSD system aids traction by using the traction control system to control engine performance and braking when one of the rear wheels begins to spin. The system should be used only when one of the rear wheels spinning occurs in a ditch or rough surface. System operation The system can be used on 2WD models and in 2WD mode on 4WD models. Press the VSC off switch to turn on the system.
4-5. Using the driving support systems 249 ■ If the engine is turned off and restarted The AUTO LSD system and the indicators are automatically turned off. ■ Reactivation of the VSC system linked to vehicle speed When the AUTO LSD system is turned on, the VSC and TRAC systems will turn on automatically if vehicle speed increases. ■ If the brake system overheats The system will cease operation and a buzzer will sound to alert the driver. Stop the vehicle in a safe place.
4-5. Using the driving support systems Rear differential lock system The rear differential lock system is provided for use only when wheel spinning occurs in a ditch or on a slippery or rugged surface. The rear differential lock system is effective in case one of the rear wheels is spinning. Press the rear differential lock switch to lock the rear differential. At this time, the rear differential lock indicator will blink. Wait a few seconds for the system to complete operation.
4-5. Using the driving support systems 251 Manual transmission 1 4WD models: Before using the rear differential lock system. Stop the vehicle or reduce your speed to less than 2 mph (3 km/h). Depress the clutch pedal and turn the front-wheel drive control switch in the “4L” position to see if this is sufficient. If this has no effect, additionally use the rear differential lock system. 2 Be sure to stop the wheels. 3 Depress the clutch pedal. 4 Press the rear differential lock switch.
4-5. Using the driving support systems WARNING ■ To avoid an accident ● Do not use the rear differential lock system except when wheel spinning occurs in a ditch or on a slippery or ragged surface. Large steering effort and careful cornering control will be required. ● Do not lock the rear differential until the wheels have stopped spinning. Otherwise, the vehicle may move in an unexpected direction when the differential lock is engaged, resulting in an accident.
4-5. Using the driving support systems 253 Active traction control system The active traction control system automatically helps prevent the spinning of 4 wheels when the vehicle is started or accelerated on slippery road surfaces. System operation 1 Stop the vehicle or reduce your speed to less than 2 mph (3 km/h). Depress the clutch pedal and turn the front-wheel drive control switch in the “4L” position. 2 Press the “A-TRAC” switch to activate the system.
4-5. Using the driving support systems ■ When the rear differential is locked (vehicles with the rear differential lock system) The active traction control system is activated only when the vehicle speed is less than 3 mph (6 km/h). ■ Sounds and vibrations caused by the active traction control system ● A sound may be heard from the engine compartment when the engine is started or just after the vehicle begins to move. This sound does not indicate that a malfunction has occurred in the system.
4-5. Using the driving support systems 255 Multi-terrain Select Multi-terrain Select is a system that improves driveability in offroad situations. Select a mode that most closely matches the type of terrain on which you are driving from among 5 modes. Brake control can be optimized in accordance with the selected mode.
4-5. Using the driving support systems Selectable modes A mode which matches the road conditions can be selected from among the following 5 modes.
4-5. Using the driving support systems 257 Selecting modes Operate the Multi-terrain Select mode selector dial during Multiterrain Select control to select a mode. 4 Driving ■ The Multi-terrain Select can be operated when ● The four-wheel drive control switch is in “4L” position. ● The Crawl Control is off. ■ When using the Multi-terrain Select The VSC system cannot be switched on or off.
4-5. Using the driving support systems ■ When the active traction control operates continuously P. 254 ■ When the four-wheel drive control switch is in “4L” position If the Multi-terrain Select system is not operating and the four-wheel drive control switch is in “4L”, the “TRAC OFF” indicator will come on. ■ When there is a malfunction in the system The slip indicator light will come on. Have the vehicle inspected by your Toyota dealer immediately.
4-5. Using the driving support systems 259 Crawl Control Allows travel on extremely rough off-road surfaces at a fixed low speed without pressing the accelerator or brake pedal. Minimizes loss of traction or vehicle slip when driving on slippery road surfaces, allowing for stable driving. Crawl Control switch 4 Driving 1 Speed selector dial Turn the dial clockwise to increase the speed and counterclockwise to decrease the speed.
4-5. Using the driving support systems Speed modes The following table shows some typical terrains and the recommended speed modes. Position Speed mode Road conditions 1 Low 2 Between low and medium 3 Medium 4 Between high 5 High Rock, mogul (downhill) and gravel (downhill) Mogul (uphill) medium and Snow, mud, gravel (uphill), sand, dirt, mogul (uphill) and grass When the system is turned off Press the Crawl Control on/off switch while Crawl Control is operating.
4-5. Using the driving support systems 261 4 Driving ■ Automatic system cancelation In the following situations, the buzzer will sound intermittently and Crawl Control will be canceled automatically. In this event, the Crawl Control indicator will flash and then goes off, and a message stating that Crawl Control has been turned off will be displayed on the multi-information display for several seconds.
4-5. Using the driving support systems WARNING ■ When using Crawl Control Do not rely solely on Crawl Control. This function does not extend the vehicle’s performance limitations. Always check the terrain thoroughly and drive safely.
4-5. Using the driving support systems 263 Clutch start cancel switch The switch allows the vehicle to be driven out of difficult situations by cranking the engine with the clutch engaged. Never use the switch for normal engine starting. Be sure to follow the starting procedure. (P. 187) Press the “CLUTCH START CANCEL” switch to cancel the clutch start system when the engine switch is turned to the “ON” position. The indicator comes on when the clutch start system is canceled.
4-5. Using the driving support systems Driving assist systems To help enhance driving safety and performance, the following systems operate automatically in response to various driving situations. Be aware, however, that these systems are supplementary and should not be relied upon too heavily when operating the vehicle.
4-5. Using the driving support systems 265 ◆ Hill-start assist control (if equipped) Helps to prevent the vehicle from rolling backward when starting on an incline or slippery slope When the TRAC/VSC/Trailer Sway Control/hill-start assist control systems are operating The slip indicator light will flash while the TRAC/VSC/Trailer Sway Control/hill-start assist control* systems are operating. *: If equipped with Multi-terrain Select/ Crawl Control.
4-5. Using the driving support systems Disabling the TRAC/VSC/Trailer Sway Control systems (4WD mode on 4WD models) If the vehicle gets stuck in fresh snow or mud, TRAC/VSC/Trailer Sway Control systems may reduce power from the engine to the wheels. You may need to turn the system off to enable you to rock the vehicle in order to free it. ■ Turning off TRAC Quickly press and release the VSC off switch to turn off TRAC. The “TRAC OFF” indicator will come on.
4-5. Using the driving support systems 267 4 Driving ■ Sounds and vibrations caused by the ABS, Multi Terrain ABS, brake assist, VSC, TRAC and Trailer Sway Control systems ● A sound may be heard from the engine compartment when the brake pedal is depressed repeatedly, when the engine is started or just after the vehicle begins to move. This sound does not indicate that a malfunction has occurred in any of these systems. ● Any of the following conditions may occur when the above systems are operating.
4-5. Using the driving support systems WARNING ■ The ABS does not operate effectively when ● The limits of tire gripping performance have been exceeded (such as excessively worn tires on a snow covered road). ● The vehicle hydroplanes while driving at high speed on wet or slick roads. ■ Stopping distance when the ABS or Multi Terrain ABS is operating may exceed that of normal conditions The ABS and Multi Terrain ABS are not designed to shorten the vehicle’s stopping distance.
4-5. Using the driving support systems 269 WARNING 4 Driving ■ Replacing tires Make sure that all tires are of the specified size, brand, tread pattern and total load capacity. In addition, make sure that the tires are inflated to the recommended tire inflation pressure level. The ABS, Multi Terrain ABS, TRAC, VSC and Trailer Sway Control systems will not function correctly if different tires are installed on the vehicle.
4-6. Driving tips Winter driving tips Carry out the necessary preparations and inspections before driving the vehicle in winter. Always drive the vehicle in a manner appropriate to the prevailing weather conditions. Preparation for winter ● Use fluids that are appropriate to the prevailing outside temperatures. • Engine oil • Engine coolant • Washer fluid ● Have a service technician inspect the condition of the battery.
4-6. Driving tips 271 When parking the vehicle Park the vehicle and move the shift lever to P (automatic transmission) or 1 or R (manual transmission) without setting the parking brake. The parking brake may freeze up, preventing it from being released. If necessary, block the wheels to prevent inadvertent sliding or creeping. Selecting tire chains Use the correct tire chain size when mounting the tire chains. Chain size is regulated for each tire size. 1 Side chain (0.2 in.
4-6. Driving tips WARNING ■ Driving with snow tires Observe the following precautions to reduce the risk of accidents. Failure to do so may result in a loss of vehicle control and cause death or serious injury. ● Use tires of the specified size. ● Maintain the recommended level of air pressure. ● Do not drive in excess of 75 mph (120 km/h), regardless of the type of snow tires being used. ● Use snow tires on all, not just some wheels.
4-6. Driving tips 273 Off-road precautions This vehicle belongs to the utility vehicle class, which has higher ground clearance and narrower tread in relation to the height of its center of gravity to make it capable of performing in a wide variety of off-road applications. Off-road vehicle features 4 Driving ● Specific design characteristics give it a higher center of gravity than ordinary passenger cars. This vehicle design feature causes this type of vehicle to be more likely to rollover.
4-6. Driving tips WARNING ■ Off-road vehicle precautions Always observe the following precautions to minimize the risk of death, serious injury or damage to your vehicle: ● In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seat belt. Therefore, the driver and all passengers should always fasten their seat belts. ● Avoid sharp turns or abrupt maneuvers, if at all possible.
4-6. Driving tips 275 ■ Additional information for off-road driving For owners in U.S. mainland, Hawaii and Puerto Rico: To obtain additional information pertaining to driving your vehicle off-road, consult the following organizations. ● State and Local Parks and Recreation Departments ● State Motor Vehicle Bureau ● Recreational Vehicle Clubs ● U.S.
4-6. Driving tips NOTICE ■ To prevent the water damage Take all necessary safety measures to ensure that water damage to the engine or other components does not occur. ● Water entering the engine air intake will cause severe engine damage. ● Water entering the automatic transmission will cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage.
4-6.
Multimedia 5 5-1. Basic Operations Audio system types........... 280 Audio system .................... 282 Steering wheel audio switches .......................... 284 USB Port/AUX Port ........... 285 Basic audio operations...... 286 5-2. Setup Setup menu....................... 288 General settings................ 289 Audio settings ................... 291 Display settings................. 292 Voice settings.................... 293 5-3. Using the multimedia system Selecting the audio source .........
Multimedia 5 5-5. Playing an audio CD and MP3/WMA/AAC discs CD player operation .......... 300 5-8. Bluetooth® audio Listening to Bluetooth® audio ............................... 328 5-6. Using an external device Listening to an iPod .......... 305 Listening to a USB memory device................ 309 Using the AUX port ........... 313 5-9. Bluetooth® phone Using a Bluetooth® phone .............................. 329 Making a call ..................... 331 Receiving a call.................
5-1. Basic Operations Audio system types Entune Audio P. 282 Entune Audio Plus Refer to the “NAVIGATION OWNER’S MANUAL”.
5-1. Basic Operations 281 Entune Premium Audio Refer to the “NAVIGATION OWNER’S MANUAL”.
5-1. Basic Operations Audio system Operations such as listening to audio, using the hands-free phone and changing multimedia system settings are started by using the following buttons. Audio system operation buttons 1 button Press this button to access the Bluetooth® hands-free system. (P. 329) 2 “SETUP” button Press this button to customize the function settings. (P. 288) 3 “AUDIO” button Display the “Select Audio Source” screen or audio top screen. (P.
5-1. Basic Operations 283 Operating the touch screen By touching the screen with your finger, you can control the multimedia system, etc. ■ Drag* Touch the screen with your finger, and move the screen to the desired position. ● Scrolling the lists ■ Flick* Touch the screen with your finger and then quickly move the screen by flicking your finger. ● Scrolling the main screen page *: The above operations may not be performed on all screens.
5-1. Basic Operations Steering wheel audio switches Some audio features can be controlled using the switches on the steering wheel. Operation may differ depending on the type of multimedia system or navigation system. For details, refer to the manual provided with the multimedia system or navigation system.
5-1. Basic Operations 285 USB Port/AUX Port Connect an iPod, USB memory device or portable audio player to the USB/AUX port as indicated below. Select “iPod”, “USB” or “AUX” on the “Select Audio Source” screen and the device can be operated via multimedia system. Connecting using the USB/AUX port Type A Type B 5 ■ iPod Turn on the power of the iPod if it is not turned on. ■ USB memory Open the cover and connect the USB memory device.
5-1. Basic Operations Basic audio operations Basic audio operations and functions common to each mode are explained in this section. Operating the multimedia system 1 Press this button to eject a disc 2 Insert a disc into the disc slot 3 Audio source selection screen appears (P. 294) 4 Turn this knob to select radio station bands, tracks and files. Also the knob can be used to select items in the list display.
5-1. Basic Operations 287 ■ Using cellular phones Interference may be heard through the multimedia system’s speakers if a cellular phone is being used inside or close to the vehicle while the multimedia system is operating. WARNING NOTICE ■ To prevent battery discharge Do not leave the multimedia system on longer than necessary when the engine is off. ■ To avoid damaging the multimedia system Take care not to spill drinks or other fluids on the multimedia system. 5 Multimedia ■ For vehicles sold in U.
5-2. Setup Setup menu You can adjust the multimedia system to your desired settings. Display “Setup” screen Press the “SETUP” button to display the “Setup” screen. 1 Select to adjust the settings for operation sounds, screen animation, etc. (P. 289) 2 Select to set the voice settings. (P. 293) 3 Select to adjust the settings for contrast and brightness of the screen. (P. 292) 4 Select to adjust the settings for registering, removing, connecting and disconnecting Bluetooth® devices. (P.
5-2. Setup 289 General settings Settings are available for adjusting the operation sounds, screen animation, etc. Screen for general settings 1 Press the “SETUP” button. 2 Select “General” on the “Setup” screen. 1 Select to adjust the clock. (P. 290) 2 “English”, “Français” or “Español” can be selected. 3 On/off can be selected to sound beeps. 4 Select to change the screen color. board layout. 6 The animation effect for the screen can be set to on/off. 7 Select to delete personal data (P.
5-2. Setup Setting the clock 1 Select “Clock” on the “General Settings” screen. 2 Adjust the time, then select “OK”. Delete personal data 1 Select “Delete Personal Data” on the “General Settings” screen. 2 Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted. 3 A confirmation screen will be displayed. Select “Yes”. The following personal data will be deleted or changed to its default settings.
5-2. Setup 291 Audio settings Settings are available for adjusting the radio operation, cover art, etc. Screen for audio settings 1 Press the “SETUP” button. 2 Select “Audio” on the “Setup” screen. 1 Number of Radio Presets Select the number of radio preset stations. 2 Display Cover Art on/off 3 Automatic Sound Levelizer Automatic sound leveliser (ASL) 5 1 Select “Automatic Sound Levelizer”.
5-2. Setup Display settings Settings are available for adjusting the contrast and brightness of the screen. Screen for display settings 1 Press the “SETUP” button. 2 Select “Display” on the “Setup” screen. 1 Adjust screen contrast/bright- ness 2 Adjust screen contrast/bright- ness of the rear view monitor camera 3 Changes to day mode. Adjusting the screen contrast/brightness 1 Select “General” or “Camera” on the “Display Settings” screen. 2 Adjust the display as desired by selecting “+” or “-”.
5-2. Setup 293 Voice settings This screen is used for guidance for voice command systems setting. 1 Adjust the voice guidance vol- ume setting. 2 Set the voice recognition prompts “High”, “Low” or “Off”. 3 Set the train voice recognition. 4 Set the voice prompt interrupt on/off.
5-3. Using the multimedia system Selecting the audio source Switching between audio sources such as radio and CD are explained in this section. Selecting the audio source 1 Press the “AUDIO” button to display the audio source selection screen. If the audio source selection screen is not displayed, press the “AUDIO” button again. 2 Select the desired audio source. 1 Select the desired source then or reorder.
5-3. Using the multimedia system “ 295 List screen operation When a list screen is displayed, use the appropriate buttons to scroll through the list. How to scroll : Select to scroll to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display. Select this button to scroll the title. Turn the “TUNE·SCROLL” knob to move the cursor box to select a desired item from the list, and press the “TUNE·SCROLL” knob to play it.
5-3. Using the multimedia system Selecting, fast-forwarding and reversing tracks/files/songs ■ Selecting a track/file/song Press the “SEEK>” or “
5-3. Using the multimedia system 297 Optimal use of the multimedia system On the “Sound Settings” screen, sound quality (Treble/Mid/ Bass), volume balance can be adjusted. How to adjust the sound settings and sound quality 1 2 3 Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5. 4 5 Select “Front” or “Rear” to adjust the front/rear audio balance. 6 7 Select “L” or “R” to adjust the left/right audio balance.
5-4. Using the radio Radio operation Select “AM” or “FM” on the audio source selection screen to begin listening to the radio. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source. 1 Audio source selection screen appears 2 Preset stations 3 Select to display RBDS text message* 4 Scanning for receivable station 5 Select to display a list of receiv- able stations 6 Setting the sound (P.
5-4. Using the radio 299 Setting station presets 1 Search for desired stations by turning the “TUNE·SCROLL” knob or pressing the “SEEK>” or “
5-5. Playing an audio CD and MP3/WMA/AAC discs CD player operation Insert disc or select “CD” on the audio source selection screen with a disc inserted to begin listening to a CD. Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.
5-5. Playing an audio CD and MP3/WMA/AAC discs 301 ■ Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc features, or due to scratches, dirt or deterioration. 5 Multimedia CDs with copy-protection features may not play correctly. ■ CD player protection feature To protect the internal components, playback is automatically stopped when a problem is detected.
5-5. Playing an audio CD and MP3/WMA/AAC discs ● WMA file compatibility • Compatible standards WMA Ver. 7, 8, 9 (only compatible with Windows Media Audio Standard) • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only compatible with 2-channel playback) Ver. 7, 8: CBR 48-192 (kbps) Ver. 9: CBR 48-320 (kbps) ● AAC file compatibility • Compatible standards MPEG4/AAC-LC • Compatible sampling frequencies 11.025/12/16/22.05/24/32/44.
5-5. Playing an audio CD and MP3/WMA/AAC discs 303 5 Multimedia ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.
5-5. Playing an audio CD and MP3/WMA/AAC discs NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function. ● Discs that have a diameter that is not 4.7 in. (12 cm). ● Low-quality or deformed discs. ● Discs with a transparent or translucent recording area.
5-6. Using an external device 305 Listening to an iPod Connecting an iPod enables you to enjoy music from the vehicle speakers. Select “iPod” on the audio source selection screen. When the iPod connected to the system includes iPod video, the system can only output the sound by selecting the browse screen. Connecting an iPod P. 285 Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.
5-6. Using an external device ■ About iPod ● “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone respectively, and has been certified by the developer to meet Apple performance standards. ● Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod and iPhone may affect wireless performance.
5-6. Using an external device 307 ■ iPod problems To resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner’s Manual. ■ Error messages Message Cause/Correction procedures “Connection error. Please consult your Owner’s Man- This indicates a problem in the iPod or its conual for instructions on how nection. to connect the iPod.” “No music files found.
5-6. Using an external device ■ Compatible models The following iPod®, iPod nano®, iPod classic®, iPod touch® and iPhone® devices can be used with this system.
5-6. Using an external device 309 Listening to a USB memory device Connecting a USB memory device enables you to enjoy music from the vehicle speakers. Select “USB” on the audio source selection screen. Connecting a USB memory device P. 285 Audio control screen Pressing the “AUDIO” button displays the audio control screen from any screens of the selected source.
5-6. Using an external device ■ Error messages for USB memory Message Cause/Correction procedures “Connection error. Please consult your Owner’s Man- This indicates a problem with the USB memual for instruction on how to ory device or its connection. connect the USB device.” “There are no files available for playback. Please add This indicates that no MP3/WMA/AAC files compatible files to your USB are included on the USB memory device. device.
5-6. Using an external device 311 5 Multimedia ● MP3 file compatibility • Compatible standards MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III) • Compatible sampling frequencies MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.
5-6. Using an external device ● MP3, WMA and AAC playback • When a device containing MP3, WMA and AAC files is connected, all files in the USB memory device are checked. Once the file check is finished, the first MP3, WMA and AAC file is played. To make the file check finish more quickly, we recommend that you do not include any files other than MP3, WMA and AAC files or create any unnecessary folders.
5-6. Using an external device 313 Using the AUX port To use the AUX port, connect a portable player, press the “AUDIO” button, then select “AUX” on display the audio control screen. Connecting a portable audio player P. 285 ■ Operating portable audio players connected to the multimedia system The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the portable audio player itself.
5-7. Connecting Bluetooth® Preparations to use wireless communication The following can be performed using Bluetooth® wireless communication: ■ A portable audio player can be operated and listened to via multimedia system ■ Hands-free phone calls can be made via a cellular phone In order to use wireless communication, register and connect a Bluetooth® device by performing the following procedures.
5-7. Connecting Bluetooth® 315 5 Multimedia For vehicles sold in Canada NOTE: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’lndustrie Canada applicables aux appareils radio exempts de licence.
5-7. Connecting Bluetooth® Access to http://www.ptc.panasonic.eu/, enter the below Model No. into the keyword search box, you can download the latest “DECLARATION of CONFORMITY” (DoC). Model No.
5-7.
5-7. Connecting Bluetooth® Device registration/connection flow 1. Register the Bluetooth® device to be used with multimedia system (P. 320, 321, 322) 2. Connect the Bluetooth® device to be used (P. 324) To be used for audio To be used for hands-free phone 3. Start Bluetooth® connection (P. 324) 3. Start Bluetooth® connection (P. 324) 4. Check connection status (P. 328) 4. Check connection status (P. 330) 5. Use Bluetooth® audio (P. 328) 5. Use Bluetooth® phone (P.
5-7. Connecting Bluetooth® 319 Registering and connecting from the “Bluetooth* Setup” screen To display the screen shown below, press the “SETUP” button and select “Bluetooth*” on the “Setup” screen. 1 Select to connect the device to be used with multimedia system. (P. 324) 2 Select to register a Bluetooth® device to be used with multimedia system. (P. 322) 3 Select to set Bluetooth® system (P. 327) detailed settings. 4 Select to delete registered devices. (P.
5-7. Connecting Bluetooth® Registering a Bluetooth® audio player for the first time To use the Bluetooth® Audio, it is necessary to register an audio player with the system. Once the player has been registered, it is possible to use the Bluetooth® Audio. For details about registering a Bluetooth® device (P. 322) 1 Turn the Bluetooth® connection setting of your audio player on. 2 Press the “AUDIO” button. 3 Select “ Audio”. 4 Select “Select Device”.
5-7. Connecting Bluetooth® 321 Registering a Bluetooth® phone for the first time To use the hands-free system, it is necessary to register a Bluetooth® phone with the system. Once the phone has been registered, it is possible to use the hands-free system. For details about registering a Bluetooth® device (P. 322) 1 Turn the Bluetooth® connection setting of your cellular phone on. 2 Press the button. 3 Select “OK” to register a phone.
5-7. Connecting Bluetooth® Registering a Bluetooth® device Bluetooth® compatible phones (HFP) and portable audio players (AVP) can be registered simultaneously. You can register up to 5 Bluetooth® devices. How to register a Bluetooth® device 1 Display the “Bluetooth* Setup” screen. (P. 319) 2 Select “Add Device”. 3 When this screen is displayed, search for the name displayed on this screen on the screen of your Bluetooth® device.
5-7. Connecting Bluetooth® 323 6 Select “OK” when the connection status changes from “Connect- ing...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again. Registration can be performed from screens other than the “Bluetooth* Setup” screen. ■ When registering from the “Bluetooth* Audio” screen 1 Display the “Bluetooth* Audio” screen. (P. 294) 2 Select “Select Device”. 3 Follow the steps in “How to register a Bluetooth® device” from step 2 (P.
5-7. Connecting Bluetooth® Connecting a Bluetooth® device Up to 5 Bluetooth® devices (Phones [HFP] and audio players [AVP]) can be registered. If more than 1 Bluetooth® device has been registered, select which device to connect to. 1 Press the “SETUP” button. 2 Select “Bluetooth*”. 3 Select the device to be con- nected. Supported profile icons will be displayed. 1 Phone 2 Audio player Supported profile icons for currently connected devices will illuminate.
5-7. Connecting Bluetooth® 325 Manual connection When auto connection has failed or “Bluetooth* Power” is turned off, you must connect the Bluetooth® device manually. ● Follow the steps in “Connecting a Bluetooth* device” from step 1 . (P. 324) *: Bluetooth is a registered trademark of Bluetooth SIG, Inc. Connecting a Bluetooth® audio player Registering an additional device 1 Select “Select Device” on the “Bluetooth* Audio” screen. 2 For more information: P.
5-7. Connecting Bluetooth® Displaying a Bluetooth® device details You can confirm and change the registered device details. Bluetooth® device registration status 1 Display the “Bluetooth* Setup” screen. (P. 319) 2 Select the device. 3 Select “Device Info”. 4 The following screen is dis- played: 1 Device Name 2 Change connection method 3 Bluetooth® Address 4 Display your telephone num- ber The number may not be displayed depending on the model of phone.
5-7. Connecting Bluetooth® 327 Detailed Bluetooth® system settings You can confirm and change the detailed Bluetooth® settings. How to check and change detailed Bluetooth® settings 1 Display the “Bluetooth* Setup” screen. (P. 319) 2 Select “System Settings”.
5-8. Bluetooth® audio Listening to Bluetooth® audio The Bluetooth® audio system enables the user to enjoy music played on a portable player from the vehicle speakers via wireless communication. When a Bluetooth® device cannot be connected, check the connection status on the “Bluetooth* Audio” screen. If the device is not connected, either register or reconnect the device. (P. 324) *: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
5-9. Bluetooth® phone 329 Using a Bluetooth® phone The hands-free system is a function that allows you to use your cellular phone without touching it. This system supports Bluetooth®. Bluetooth® is a wireless data system that allows the cellular phone to wirelessly connect to the hands-free system and make/receive calls. Before making a phone call, check the connection status, battery charge, call area and signal strength. (P.
5-9. Bluetooth® phone ■ Telephone switch (P. 342) ■ Microphone The vehicle’s built in microphone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. To use the hands-free system, you must register your Bluetooth® phone in the system. (P. 322) Status display You can check indicators such as signal strength and battery charge on the phone screen.
5-9. Bluetooth® phone 331 Making a call Once a Bluetooth® phone is registered, you can make a call using the following procedure: Dialing 1 Display the phone screen. (P. 329) 2 Select the “Dial Pad” tab and enter a phone number. To delete the input phone number, select . For the first digit, you can enter “+” by selecting “” for a while. 3 Press the switch on the steering wheel or select . Dialing from the contacts list You can dial a number from the contact data imported from your cellular phone.
5-9. Bluetooth® phone 1 Press the switch on the steering wheel. If the phonebook is empty, a message will be displayed. For a PBAP compatible Bluetooth® phone and “Automatic Transfer” is off 2 Select the desired item. 1 Select to transfer new con- tacts from a cellular phone, select “Always” and then enable “Automatic Transfer”. 2 Select to transfer all the con- tacts from a connected cellular phone only once. 3 Select to cancel transferring.
5-9. Bluetooth® phone 333 Calling using favorites list You can make a call using numbers registered in the contact. 1 Display the phone screen. (P. 329) 2 Select “Favorites” tab. 3 Select the desired number to make a call. Dialing from call history You can make a call using the call history, which has the 3 functions below. : calls which you missed : calls which you received : calls which you made 1 Display the phone top screen. (P. 329) 2 Select “Call History” tab.
5-9. Bluetooth® phone Receiving a call When a call is received, the following screen is displayed together with a sound. To answer the phone Press the switch on the steering wheel or select . To refuse a call Press the switch on the steering wheel or select . To adjust the incoming call volume Turn the “PWR·VOL” knob. You can also adjust the volume using the steering switches. ■ International calls Received international calls may not be displayed correctly depending on the cellular phone in use.
5-9. Bluetooth® phone 335 Speaking on the phone The following screen is displayed when speaking on the phone. To adjust the call volume Select “-” or “+”. You can also adjust the volume using the steering switches or the volume knob. To prevent the other party from hearing your voice 5 Select “Mute”. When using phone services such as an answering service or a bank, you can store phone numbers and code numbers in the contact. 1 Select “0-9”. 2 Input the number.
5-9. Bluetooth® phone ■ Release Tones ● A continuous tone signal is a character string that consists of numbers and the characters “p” or “w”. (e.g.056133w0123p#1) ● When the “p” pause tone is used, the tone data up until the next pause tone will be automatically sent after 2 seconds have elapsed. When the “w” pause tone is used, the tone data up until the next pause tone will be automatically sent after a user operation is performed.
5-9. Bluetooth® phone 337 Call waiting When a call is interrupted by a third party while talking, an incoming call message will be displayed. To talk with the other party: • Press the switch on the steering wheel. • Select . To refuse the call: • Press the switch on the steering wheel. • Select . Every time you press the switch on the steering wheel or select during call waiting, you will be switched to the other party.
5-9. Bluetooth® phone Bluetooth® phone message function Received messages can be forwarded from the connected Bluetooth® phone, enabling checking and replying using the multimedia system. Depending on the type of Bluetooth® phone connected, received messages may not be transferred to the message inbox. If the phone does not support the message function, this function cannot be used. Displaying message inbox screen 1 Press the 2 Select button. .
5-9. Bluetooth® phone 339 ■ Receiving a message ● Depending on the cellular phone used for receiving messages, or its registration status with the navigation system, some information may not be displayed. ● The pop up screen is separately available for incoming e-mail and SMS/ MMS messages under the following conditions: E-mail: • “Incoming E-mail Display” is set to “Full Screen”. (P. 352) • “E-mail Notification Popup” is set to on. (P. 352) SMS/MMS: • “Incoming SMS/MMS Display” is set to “Full screen”.
5-9. Bluetooth® phone ■ Check the messages ● Depending on the type of Bluetooth® phone being connected, it may be necessary to perform additional steps on the phone. ● Messages are displayed in the appropriate connected Bluetooth® phone’s registered mail address folder. Select the tab of the desired folder to be displayed. ● Only received messages on the connected Bluetooth® phone can be displayed. ● The text of the message is not displayed while driving.
5-9. Bluetooth® phone 341 Calling the message sender Calls can be made to an e-mail/SMS/MMS message sender’s phone number. 1 Display the message inbox screen. (P. 338) 2 Select the desired message. 3 Select . 4 Check that the “Call” screen is displayed. ■ Calling from a number within a message Calls can be made to a number identified in a message’s text area. 1 Display the message inbox screen. (P. 338) 2 Select the desired message. 3 Select the text area.
5-9. Bluetooth® phone Using the steering wheel switches The steering wheel switches can be used to operate a connected cellular phone.
5-9. Bluetooth® phone 343 Bluetooth® phone settings You can adjust the hands-free system to your desired settings. “Phone/Message Settings” screen To display the screen shown below, press the “SETUP” button, and select “Phone” on the “Setup” screen. 1 Set the phone connection (P. 322) 2 Sound Settings (P. 344) 13 Contact/Call History Settings (P. 345) 14 Set the message settings (P. 352) 5 Set the phone display (P.
5-9. Bluetooth® phone Sound setting 1 Display the “Phone/Message Settings” screen. (P. 343) 2 Select “Sound Settings” on the “Phone/Message screen. Settings” 1 Set the desired ringtone. 2 Adjust the ringtone volume. 13 Adjust the message readout volume. 4 Set the desired incoming SMS/MMS tone. 5 Adjust the incoming SMS/ MMS tone volume. 6 Set the incoming e-mail tone. 7 Adjust the incoming e-mail tone volume. 8 Adjust the default volume of the other party’s voice.
5-9. Bluetooth® phone 345 Contact/Call History Settings The contacts can be transferred from a Bluetooth® phone to the system. Contacts can also be added, edited and deleted. The call history can be deleted and contacts and favorites can be changed. 1 Display the “Phone/Message Settings” screen. (P. 343) 2 Select “Contact/Call History Settings”. 3 Select the desired item to be set. 1 For PBAP compatible Bluetooth® phones, select to set “Automatic Transfer” on/ off.
5-9. Bluetooth® phone Update contacts from phone Operation methods differ between PBAP compatible and PBAP incompatible but OPP compatible Bluetooth® phones. If your cellular phone is neither PBAP nor OPP compatible, the contacts cannot be transferred. ■ For PBAP compatible Bluetooth® Phones 1 Select “Update Contacts from Phone”. 2 Check that a confirmation screen is displayed when the opera- tion is complete. This operation may be unnecessary depending on the type of cellular phone.
5-9. Bluetooth® phone 347 ■ Updating the contacts in a different way (from the “Call His- tory” screen) For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 345) 1 Display the phone screen. (P. 329) 2 Select the “Call History” tab and select a contact not yet regis- tered in the contact list. 3 Select “Update Contact”. 4 Select the desired contact. 5 Select a phone type for the phone number.
5-9. Bluetooth® phone Editing the contact data For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 345) 1 Select “Edit Contact”. 2 Select the desired contact. 3 Select corresponding to the desired name or number. For editing the name 4 Follow the steps in “Registering a new contact to the contact list” from step 2 . (P. 347) For editing the number 4 Follow the steps in “Registering a new contact to the contact list” from step 3 .
5-9. Bluetooth® phone 349 Deleting the contact data For PBAP compatible Bluetooth® phones, this function is available when “Automatic Transfer” is set to off. (P. 345) 1 Select “Delete Contacts”. 2 Select the desired contact and select “Delete”. 13 Select “Yes” when the confirmation screen appears. ■ Deleting the contact in a different way (from the “Contact Details” screen) 1 Display the phone screen. (P.
5-9. Bluetooth® phone When 15 contacts have already been registered to the favorites list 1 When 15 contacts have already been registered to the favorites list, a registered contact needs to be replaced. Select “Yes” when the confirmation screen appears to replace a contact. 2 Select the contact to be replaced. 3 Check that a confirmation screen is displayed when the opera- tion is complete.
5-9. Bluetooth® phone 351 ■ Deleting the contacts in the favorites list 1 Select “Remove Favorite”. 2 Select the desired contacts and select “Remove”. 3 Select “Yes” when the confirmation screen appears. 4 Check that a confirmation screen is displayed when the opera- tion is complete. Deleting contacts in the favorites list in a different way (from the “Contacts” screen) 1 Display the phone screen. (P. 329) 2 Select the “Contacts” tab.
5-9. Bluetooth® phone Message Settings 1 Display the “Phone/Message Settings” screen. (P. 343) 2 Select “Messaging Settings”. 3 Select the desired item to be set. 1 Set message 2 Set message automatic transfer on/off. automatic readout on/off. 3 Set the SMS/MMS notifica- tion popup on/off. 4 Set the e-mail notification popup on/off. 5 Set adding the vehicle signa- ture to outgoing messages on/off. 6 Set updating message read status on phone on/off. 7 Change the incoming SMS/MMS display.
5-9. Bluetooth® phone 353 ■ Displaying the “Messaging Settings” screen in a different way 1 Display the phone screen. (P. 329) 2 Select . 3 Select “Settings”. Phone Display Settings 1 Display the “Phone/Message Settings” screen. (P. 343) 2 Select “Phone Display Settings”. 3 Select the desired item to be set. 1 Change the incoming call display. “Full Screen”: When a call is received, the hands-free screen is displayed and can be operated on the screen.
5-9. Bluetooth® phone What to do if... (Troubleshooting) If there is a problem with the hands-free system or a Bluetooth® device, first check the table below. When using the hands-free system with a Bluetooth® device The hands-free system or Bluetooth® device does not work. The connected device may not be a compatible Bluetooth® cellular phone. For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.
5-9. Bluetooth® phone 355 When registering/connecting a cellular phone A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone. Enter the correct passcode on the cellular phone. The registration operation has not been completed on the cellular phone side. Complete the registration operation on the cellular phone (approve registration on the phone). Old registration information remains on either this system or the cellular phone.
5-9. Bluetooth® phone When using the phonebook Phonebook data cannot be transferred manually/automatically. The profile version of the connected cellular phone may not be compatible with transferring phonebook data. For a list of specific devices which operation has been confirmed on this system, check with your Toyota dealer or the following website: http://www.toyota.com/entune Automatic phonebook transfer function on this system is set to off.
5-9. Bluetooth® phone 357 In other situations Even though all conceivable measures have been taken, the symptom status does not change. The cellular phone is not close enough to this system. Bring the cellular phone closer to this system. The cellular phone is the most likely cause of the symptom. Turn the cellular phone off, remove and reinstall the battery pack, and then restart the cellular phone. Enable the cellular phone’s Bluetooth® connection.
5-10. Bluetooth® Bluetooth® ■ When using the Bluetooth® audio system ● In the following conditions, the system may not function. • If the portable audio player is turned off • If the portable audio player is not connected • If the portable audio player’s battery is low ● There may be a delay if a cellular phone connection is made during Bluetooth® audio play.
5-10. Bluetooth® 359 5 Multimedia ■ Bluetooth® antenna The antenna is built into the display. If the portable audio player is behind the seat or in the glove box or console box, or is touching or covered by metal objects, the connection status may deteriorate. If the cellular phone is behind the seat or in the console box, or touching or covered by metal objects, the connection status may deteriorate.
5-10. Bluetooth® ■ Compatible models The Bluetooth® audio system supports portable audio players with the following specifications ● Bluetooth® specifications: Ver. 2.0, or higher (Recommended: Ver. 3.0+EDR or higher) ● Profiles: • A2DP (Advanced Audio Distribution Profile) Ver. 1.0, or higher (Recommended: Ver. 1.2 or higher) This is a profile to transmit stereo audio or high quality sound to the multimedia system. • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Recommended: Ver. 1.
5-10. Bluetooth® 361 ■ Reconnecting the portable audio player If the portable audio player is disconnected due to poor reception when the engine switch is in the “ACC” or “ON” position (vehicles without a smart key system), or ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the system automatically reconnects the portable audio player.
5-10. Bluetooth® NOTICE ■ When leaving the vehicle Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.
5-11. Using the voice command system 363 Voice command system The voice command system enables the hands-free system to be operated using voice commands. Operations of the voice command system can be performed by selecting the menu corresponding to each function on the screen. Even if any menu is selected, commands displayed on all menus can be operated. Using the voice command system 1 Press the talk switch. 5 tion. 2 Select to start the voice recog- nition tutorial.
5-11. Using the voice command system ■ Microphone P. 330 ■ When using the microphone ● It is unnecessary to speak directly into the microphone when giving a command. ● Voice commands may not be recognized if: • Spoken too quickly. • Spoken at a low or high volume. • The roof or windows are open. • Passengers are talking while voice commands are spoken. • The air conditioning speed is set high. • The air conditioning vents are turned towards the microphone.
5-11. Using the voice command system 365 Command list Some recognizable voice commands and their actions are shown below as examples.
5-11. Using the voice command system Mobile Assistant The Mobile Assistant feature will activate Apple’s Siri® Eyes Free mode via the steering wheel switches. To operate the Mobile Assistant, a compatible cellular phone must be registered and connected to this system via Bluetooth®. (P. 322) 1 Press and hold the on the steering wheel until you hear the beeps. 2 The Mobile Assistant can be used only when the following screen is displayed.
5-11. Using the voice command system 367 ■ Notes about Mobile Assistant ● The available features and functions may vary based on the iOS version installed on the connected device. ● Some Siri® features are limited in Eyes Free mode. If you attempt to use an unavailable function, Siri® will inform you that the function is not available. ● If Siri® is not enabled on the cellular phone connected via Bluetooth®, an error message will be displayed on the screen.
5-11.
Interior features 6-1. Using the air conditioning system Manual air conditioning system............................. 370 Automatic air conditioning system............................. 376 Seat heaters...................... 383 6-2. Using the interior lights Interior lights list ................ 385 • Interior light ................... 386 • Front personal lights ..... 386 • Cargo lamp main switch............................ 387 6 6-3. Using the storage features List of storage features .....
6-1. Using the air conditioning system Manual air conditioning system Air conditioning controls ■ Adjusting the temperature setting To adjust the temperature setting, turn the temperature control dial clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient temperature air or heated air. For quick cooling, turn the temperature control dial to the “MAX A/C” position.
6-1. Using the air conditioning system 371 ■ Fan speed setting To adjust the fan speed, turn the fan speed control dial clockwise (increase) or counterclockwise (decrease). Turning the dial to “OFF” turns off the fan. ■ Change the airflow mode To select the airflow, set the air outlet selector dial to the desired position. The positions between the air outlet selections can also be selected for more delicate adjustment.
6-1. Using the air conditioning system Other functions ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed. ■ Defogging the windshield Defoggers are used to defog the windshield and front side windows. Set the air outlet selector dial to position.
6-1. Using the air conditioning system [ Air outlets ■ Location of air outlets Air outlets and air volume changes according to the selected airflow mode. * * *: Double Cab models only ■ Adjusting the position and opening and closing the air outlets Direct air flow to the left or right, up or down.
6-1. Using the air conditioning system ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the wind- shield effectively. ● If you turn off, the windows may fog up more easily. ● The windows may fog up if the recirculated air mode is used.
6-1. Using the air conditioning system 375 WARNING ■ To prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision. ● Do not place anything on the instrument panel which may cover the air outlets. Otherwise, air flow may be obstructed, preventing the windshield defoggers to defog.
6-1. Using the air conditioning system Automatic air conditioning system Air outlets and fan speed are automatically adjusted according to the temperature setting. Air conditioning controls ■ Adjusting the temperature setting To adjust the temperature setting, turn the temperature control dial clockwise (warm) or counterclockwise (cool). The air conditioning system switches between individual and simultaneous mode each time is pressed. (P.
6-1. Using the air conditioning system 377 ■ Fan speed setting To adjust the fan speed, turn the fan speed control dial clockwise (increase) or counterclockwise (decrease). Press to turn the fan off. ■ Change the airflow mode To change the airflow, press . The air outlets used are switched each time the button is pressed.
6-1. Using the air conditioning system Using by automatic mode 1 Press . 2 Adjust the temperature setting. 3 To stop the operation, press . ■ Automatic mode indicator If the fan speed setting or air flow modes are operated, the automatic mode indicator goes off. However, automatic mode for functions other than that operated is maintained.
6-1. Using the air conditioning system 379 Other functions ■ Switching between outside air and recirculated air modes Press . The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recycles air inside the vehicle) (indicator on) each time the button is pressed. ■ Defogging the windshield Defoggers are used to defog the windshield and front side windows. Press .
6-1. Using the air conditioning system [ Air outlets ■ Location of air outlets Air outlets and air volume changes according to the selected airflow mode. * * *: Double Cab models only ■ Adjusting the position of and opening and closing the air out- lets Direct air flow to the left or right, up or down.
6-1. Using the air conditioning system ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed. ■ Fogging up of the windows ● The windows will easily fog up when the humidity in the vehicle is high. Turning on will dehumidify the air from the outlets and defog the windshield effectively.
6-1. Using the air conditioning system ■ Ventilation and air conditioning odors ● To let fresh air in, set the air conditioning system to the outside air mode. ● During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents. ● To reduce potential odors from occurring: • It is recommended that the air conditioning system be set to outside air mode prior to turning the vehicle off.
6-1. Using the air conditioning system 383 Seat heaters WARNING ■ Burns ● Use caution when seating the following persons in a seat with the seat heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically challenged • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping drugs, cold remedies, etc.) ● Do not cover the seat with anything when using the seat heater.
6-1. Using the air conditioning system Turns the seat heaters on 1 Drivers side 2 Front passenger side Each time the switch is pressed, the operation condition changes as follows. Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off The level indicator (amber) light up during operation. ■ The seat heaters can be used when Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The engine switch is in IGNITION ON mode.
6-2. Using the interior lights 385 Interior lights list 1 Front interior light/personal lights 2 Rear interior light 4 Engine switch light (vehicles with a smart key system) (P. 386) with a wireless remote control system) 5 Center tray light 6 Cargo lamp (if equipped) (P.
6-2. Using the interior lights Interior light ■ Front 1 Off 2 Door position The personal/interior lights come on when a door is opened. They turn off when the doors are closed. 3 On ■ Rear 1 Door position The personal/interior lights come on when a door is opened. They turn off when the doors are closed.
6-2. Using the interior lights 387 Cargo lamp main switch (if equipped) 1 Off 2 Door position The cargo lamp comes on when a door is opened. They turn off when the doors are closed. 3 On 6 Interior features ■ Illuminated entry system Vehicles without a smart key system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/unlocked, and whether the doors are opened/ closed.
6-3. Using the storage features List of storage features 1 Bottle holders 4 Glove box (P. 389) 2 Front console box (P. 390) 5 Cup holders (P. 391) 3 Overhead console 6 Storage boxes (P. 393) (if equipped) (P. 392) (P.
6-3. Using the storage features 389 WARNING ■ Items that should not be left in the storage spaces Do not leave glasses, lighters or spray cans in the storage spaces, as this may result in the following when cabin temperature becomes high: ● Glasses may be deformed by heat or cracked if they come into contact with other stored items. ● Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.
6-3. Using the storage features Front console box Lift the lid while pulling up the knob to release the lock. ■ Passing a cable from the console box Overhead console (if equipped) The overhead console is useful for temporarily storing sunglasses and similar small items. Press the lid. WARNING ■ Items unsuitable for storing Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the overhead console to open and the items inside may fall out, resulting in an accident.
6-3. Using the storage features 391 Cup holders Vehicles with an automatic transmission Vehicles with a manual transmission 6 WARNING Interior features ■ Items unsuitable for the cup holder Do not place anything other than cups or beverage cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.
6-3. Using the storage features Bottle holders Front door Front console box Rear door (Double Cab models only) ■ When using the holder as a bottle holder ● When storing a bottle, close the cap. ● The bottle may not be stored depending on its size or shape.
6-3. Using the storage features 393 WARNING ■ Items unsuitable for the bottle holders Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. NOTICE ■ Items that should not be stowed in the bottle holders Put the cap on before stowing a bottle. Do not place open bottles in the bottle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
6-3. Using the storage features 2 Turn the knob counterclock- wise. 3 Open the lid. Press the lid against the bottom of the lower cushion until it is supported by the hook-and-loop fastener. Make sure that the lid is supported to prevent it from closing unexpectedly. Under the rear seats (Double Cab models) 1 Swing the bottom cushion up by pulling the lock release strap. 2 Turn the knob counterclockwise and open the lid.
6-3. Using the storage features 395 WARNING ■ Caution while driving Keep the storage boxes closed and locked. Injuries may result in the event of an accident or sudden braking. ■ Storage box (Access cab models [vehicles without rear seat]) Never let anyone sit on the storage box. Doing so may damage the storage box and cause injury. In addition, it may cause death or severe injury in the event of sudden braking, sudden swerving or an accident.
6-3. Using the storage features Luggage compartment features ■ Deck Left side 1 Deck hooks (P. 399) 2 Auxiliary boxes (P. 397) Right side 4 Power outlet (if equipped) (P. 409) 3 Tie-down cleats (P. 397) ■ Tonneau cover (if equipped) P. 400 ■ Behind the rear seat (Double Cab models only) 1 Grocery bag hooks (P. 404) 2 Storage boxes (P.
6-3. Using the storage features 397 Deck ■ Auxiliary boxes Turn the knob and open the lid. ■ Tie-down cleats The deck rail system enables you to insert and move tie-down cleats to their best location along deck rails to secure a load.
6-3. Using the storage features ● Installing the tie-down cleat 1 Loosen the thumb wheel in a counterclockwise motion, and depress the wheel so that the locking plate maintains 0.5 in. (12.7 mm) gap. 1 Deck rail 2 Detent 3 Locking plate 2 Insert the locking plate into the deck rail, rotate the tiedown cleat 90°, and release the thumb wheel. 3 Slide the cleat to the closest detent in the rail system. You will feel that the locking plate snaps into a detent.
6-3. Using the storage features 399 5 Check the tie-down cleat to confirm that it is locked into a detent and securely mounted to the deck rail system. ■ Deck hooks Deck hooks are provided for securing loose items.
6-3. Using the storage features Tonneau cover (if equipped) ■ Open the tonneau cover 1 Open the tailgate. (P. 116) 2 Pull the lever and lift to open the rear tonneau cover. 3 Pull the lever and lift to open the center tonneau cover. 4 Secure by using the storage straps. Make sure that the buckle is fully engaged by pulling on the strap.
6-3. Using the storage features 401 ■ Close the tonneau cover 1 Remove the straps while pushing the release lock. Confirm that there is no tie-down cleat in the latch position before closing the tonneau cover. 2 Close the tonneau cover and push down on the top surface (latch position) until it clicks. After closing the tonneau cover, try pulling it up towards you to make sure all latches are securely locked. Confirm cargo and cleats do not interfere with tonneau cover latching and completely closing.
6-3. Using the storage features 5 When installing, reverse the steps listed. Push down on the top surface (latch position) until it clicks, tighten the bolt, and then close the cap. After closing the tonneau cover, try pulling it up towards you to make sure all latches are securely locked. WARNING ■ Caution while driving Keep the auxiliary boxes closed and locked. Injuries may result in the event of an accident or sudden braking.
6-3. Using the storage features 403 WARNING ■ Caution for the tonneau cover Observe the following precautions regarding the tonneau cover. Failure to do so may cause death or serious injury. ● Confirm the tonneau cover is securely closed before driving. ● Confirm cargo and cleats do not interfere with tonneau cover latching and completely closing. ● Do not drive with only the front or only the rear tonneau cover opened. 6 Interior features ● Bolt must be installed and properly tightened.
6-3. Using the storage features NOTICE ■ When using the tonneau cover ● Deck area is not waterproof, so take care when transporting items which may be damaged by water. ● Do not drive the vehicle with objects on top of the tonneau cover. ● Take care when operating and storing the tonneau cover to avoid scratching its outer surfaces. When stowing, stand it up with the section with storage straps facing upward. ● Take care when removing and installing the tonneau cover, as it is heavy.
6-3. Using the storage features 405 ■ Storage boxes Storage box is designed to place things like bottles. Left side Right side (vehicles without a sub woofer) NOTICE ■ Grocery bag hook weight capacity Do not hang any object heavier than 7 lb. (3 kg) on the grocery bag hooks.
6-4. Other interior features Other interior features Sun visors 1 To set the visor in the forward position, flip it down. 2 To set the visor in the side posi- tion, flip down, unhook, and swing it to the side. 3 To use the side extender, place the visor in the side position, then slide it backward. Vanity mirrors (if equipped) Open the cover The light turns on when the cover is opened. NOTICE Do not leave the vanity lights on for extended periods while the engine is stopped.
6-4. Other interior features Clock The clock is displayed on the screen. ■ Setting the clock Vehicles with Entune Audio (Audio system types: P. 280) P. 290 Vehicles with Entune Audio Plus or Entune Premium Audio (Audio system types: P. 280) Refer to the “NAVIGATION OWNER’S MANUAL”. AND MULTIMEDIA 6 Interior features ■ The clock is displayed when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position.
6-4. Other interior features Power outlets (12 V DC) Please use as a power supply for electronic goods that use less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make sure that the power consumption of all the connected power outlets are less than 120 W. Type A (instrument panel) Open the lid. Type B (inside of the console box) Lift the lid while pulling up the knob to release the lock and open the lid.
6-4. Other interior features 409 ■ The power outlets can be used when Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The engine switch is in ACCESSORY or IGNITION ON mode. NOTICE ● Close the power outlet lids when the power outlets are not in use. Foreign objects or liquids that enter the power outlets may cause a short circuit. ● Do not use the power outlets longer than necessary when the engine is not running.
6-4. Other interior features ■ Maximum available capacity of the power outlet ● While the vehicle is being driven The maximum capacity of the power outlet is always 120 V AC/ 100 W. ● When the vehicle is stationary The maximum capacity of the power outlet varies depending on the following conditions: • The maximum capacity is 120 V AC/100 W when the following conditions applies: Vehicles with an automatic transmission The shift lever is moved to any positions other than P and N.
6-4. Other interior features 411 ■ If the engine is started with the power outlet main switch on The maximum capacity of the power supply may decrease to below the standard, or may be cut off completely, even when the vehicle is stationary. ■ The protection circuit may be activated to cut the power supply if any of the following conditions apply: ● The engine is started with the power outlet main switch on. ● Use of electrical appliances exceeding the maximum capacity is attempted.
6-4. Other interior features WARNING ■ Using a power outlet Observe the following precautions to reduce the risk of injury. ● Use of the power outlet when it is wet with water or snow may result in electrical shocks and is extremely dangerous. The power outlet must be thoroughly dried before use. ● Do not allow children to use or play with the power outlet. ● Be careful not to get any part of your body caught in the power outlet lid.
6-4. Other interior features 413 NOTICE 6 Interior features ■ To avoid damaging the power outlet and the plug ● Close the power outlet lid when not in use. ● Do not allow foreign objects or liquids to enter the power outlet, as this may cause a short circuit. ● Do not use plug adaptors to connect too many plugs to the power outlet. ● After removing a plug, gently close the power outlet lid.
6-4. Other interior features Wireless charger (if equipped) A mobile device can be charged wirelessly on the tray. Vehicles without a smart key system Charging can only be performed with the engine switch in the “ACC” or “ON” position and only on mobile devices with the “ ” logo. Vehicles with a smart key system Charging can only be performed with the engine switch in ACCESSORY or IGNITION ON mode and only on mobile devices with the “ ” logo. 1 Press the wireless charger switch.
6-4. Other interior features 415 6 Interior features ■ If the wireless charger LED indicators flash If the wireless charging surface of the tray becomes too hot, the LED indicators will flash and charging is canceled. The LED indicators will be illuminated if the surface of the tray cools down. If the LED indicators flash even though the surface of the tray is not hot, the wireless charger may be malfunctioning. Consult your Toyota dealer.
6-4.
6-4. Other interior features 417 WARNING 6 Interior features ■ Caution regarding interference with electronic devices ● People with implantable cardiac pacemakers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should maintain a reasonable distance between themselves and the wireless charger. The radio waves may affect the operation of such devices.
6-4.
6-4. Other interior features 419 Assist grips An assist grip (type A) installed on the pillar can be used when getting in or out of the vehicle and others. An assist grip (type B) installed on the ceiling can be used to support your body while sitting on the seat. 1 Assist grip (type A) 2 Assist grip (type B) WARNING ■ Assist grip (type B) Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
6-4. Other interior features Camera mounting bracket Windshield is equipped with a dedicated mounting bracket for use with the GoPro® QRB (Quick Release Buckle) and must be connected directly to the GoPro® camera housing. ■ Before using Comply with state and local regulations while operating the GoPro® camera. WARNING ■ Caution while driving Do not operate any cameras or recording devices that may be installed to the camera mounting bracket on the windshield while driving.
6-4. Other interior features 421 Garage door opener The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, security systems, and other devices. HomeLink® The HomeLink® wireless control system in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming methods on the following pages to determine the method which is appropriate for the device.
6-4. Other interior features ■ Programming the HomeLink® 1 Press and release the HomeLink® button you want to program and check that the HomeLink® indicator light flashes orange. Perform 3 within 60 seconds of 1 , or the indicator light will stop flashing and programming will not be able to be completed. 2 Point the remote control transmitter for the device at the rear view mirror, 1 to 3 in. (25 to 75 mm) from the HomeLink® buttons. Keep the HomeLink® indicator light in view while programming.
6-4. Other interior features 423 ● Device with rolling code: If the indicator light flashes rapidly, your garage door opener motor (or other device) is equipped with a rolling code. Complete the programming process by firmly pressing and holding the programmed HomeLink® button for 2 seconds and then release the button. ● If the garage door or other device does not operate, proceed to “Programming a rolling code system”.
6-4. Other interior features 3 Press and hold the desired HomeLink® button (inside the vehicle) for 2 seconds and release it. Repeat this sequence (press/hold/ release) up to 3 times to complete programming. If the garage door opener motor operates when the HomeLink® button is pressed, the garage door opener motor recognizes the HomeLink® signal.
6-4. Other interior features 425 ■ Reprogramming a single HomeLink® button When the following procedure is performed, buttons which already have devices registered to them can be overwritten: 1 With one hand, press and hold the desired HomeLink® button. 2 When the HomeLink® indicator starts flashing orange, release the HomeLink® button and perform “Programming HomeLink®” 1 (it takes 20 seconds for the HomeLink® indicator to start flashing). Operating the HomeLink® Press the appropriate HomeLink® button.
6-4. Other interior features Erasing the entire HomeLink® memory (all three codes) Press and hold the 2 outside buttons for 10 seconds until the indicator light HomeLink® changes from continuously lit orange to rapidly flashing green. If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory. ■ Codes stored in the HomeLink® memory ● The registered codes are not erased even if the battery cable is disconnected.
6-4. Other interior features 427 WARNING ■ When programming a garage door or other remote control device The garage door or other device may operate, so ensure people and objects are out of danger to prevent potential harm. ■ Conforming to federal safety standards Do not use the HomeLink® compatible transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an interfering object.
6-4. Other interior features Compass The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. Operation To turn the compass on or off, press the button for more than 3 seconds.
6-4. Other interior features 429 Calibrating the compass Samoa: 5 Guam: 8 Saipan: 8 The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate. To obtain higher precision of accurate calibration, refer to the following. ■ Deviation calibration 1 Stop the vehicle where it is safe to drive in a circle.
6-4. Other interior features ■ Circling calibration 1 Stop the vehicle in a place where it is safe to drive in a circle. 2 Press and hold the button for 9 seconds. “C” appears on the compass display. Type A Type B 3 Drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until a direction is displayed.
6-4. Other interior features 431 WARNING ■ While driving the vehicle Do not adjust the display. Adjust the display only when the vehicle is stopped. ■ When doing the circling calibration Secure a wide space, and watch out for people and vehicles in the vicinity. Do not violate any local traffic rules while performing circling calibration. NOTICE ■ To avoid the compass malfunctions Do not place magnets or any metal objects near the inside rear view mirror.
6-4.
Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior.......... 434 Cleaning and protecting the vehicle interior........... 437 7-2. Maintenance Maintenance requirements ................... 440 General maintenance........ 442 Emission inspection and maintenance (I/M) programs......................... 445 7 7-3. Do-it-yourself maintenance Do-it-yourself service precautions ..................... 446 Hood ................................. 448 Engine compartment.....
7-1. Maintenance and care Cleaning and protecting the vehicle exterior Perform the following to protect the vehicle and maintain it in prime condition: ● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. ● Wash the vehicle body using a sponge or soft cloth, such as a chamois. ● For hard-to-remove marks, use car wash soap and rinse thoroughly with water. ● Wipe away any water.
7-1. Maintenance and care 435 WARNING ■ When washing the vehicle Do not apply water to the inside of the engine compartment. Doing so may cause the electrical components, etc., to catch fire. ■ Precautions regarding the exhaust pipe Exhaust gases cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching hot exhaust pipe can cause burns.
7-1. Maintenance and care NOTICE ■ Cleaning the exterior lights ● Wash carefully. Do not use organic substances or scrub with a hard brush. This may damage the surfaces of the lights. ● Do not apply wax to the surfaces of the lights. Wax may cause damage to the lenses. ■ When using a high pressure car wash Do not bring the nozzle tip close to boots (rubber or resin manufactured cover), connectors or the following parts. The parts may be damaged if they come into contact with high-pressure water.
7-1. Maintenance and care 437 Cleaning and protecting the vehicle interior The following procedures will help protect your vehicle’s interior and keep it in top condition: Protecting the vehicle interior Remove dirt and dust using a vacuum cleaner. Wipe dirty surfaces with a cloth dampened with lukewarm water. Cleaning the leather areas ● Remove dirt and dust using a vacuum cleaner. ● Wipe off any excess dirt and dust with a soft cloth dampened with diluted detergent.
7-1. Maintenance and care ■ Caring for leather areas Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’s interior. ■ Shampooing the carpets There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not use water. Wipe dirty surfaces and let them dry. Excellent results are obtained by keeping the carpet as dry as possible.
7-1. Maintenance and care 439 NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehicle interior or cause streaks or damage to painted surfaces: • Non-seat portions: Organic substances such as benzene or gasoline, alkaline or acidic solutions, dye, and bleach • Seats: Alkaline or acidic solutions, such as thinner, benzene, and alcohol ● Do not use a polish wax or polish cleaner.
7-2. Maintenance Maintenance requirements To ensure safe and economical driving, day-to-day care and regular maintenance are essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance: General maintenance General maintenance should be performed on a daily basis. This can be done by yourself or by a Toyota dealer. Scheduled maintenance Scheduled maintenance should be performed at specified intervals according to the maintenance schedule.
7-2. Maintenance 441 ■ Resetting the reminder light (vehicles without a multi-information display) or the message (vehicles with a multi-information display) indicating maintenance is required (U.S.A. only) After the required maintenance is performed according to the maintenance schedule, please reset the reminder light or the message. To reset the reminder light or the message, follow the procedure described below: 1 Turn the engine switch off.
7-2. Maintenance General maintenance Listed below are the general maintenance items that should be performed at the intervals specified in the “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice. Engine compartment Items Check points Battery Check the connections. (P.
7-2. Maintenance 443 Vehicle interior Items Check points • The accelerator pedal should move smoothly (without uneven pedal effort or catching). Automatic transmission “Park” mechanism • When parked on a slope and the shift lever is in P, is the vehicle securely stopped? Brake pedal • Does the brake pedal move smoothly? • Does the brake pedal have appropriate clearance from the floor? (P. 576) • Does the brake pedal have the correct amount of free play? (P.
7-2. Maintenance Vehicle exterior Items Check points Doors • Do the doors operate smoothly? Engine hood • Does the engine hood lock system work properly? Fluid leaks • There should not be any signs of fluid leakage after the vehicle has been parked. Tires • Is the tire inflation pressure correct? • The tires should not be damaged or excessively worn. • Have the tires been rotated according to the maintenance schedule? • The wheel nuts should not be loose.
7-2. Maintenance 445 Emission inspection and maintenance (I/M) programs Some states have vehicle emission inspection programs which include OBD (On Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. If the malfunction indicator lamp comes on The OBD system determines that a problem exists somewhere in the emission control system. Your vehicle may not pass the I/M test and may need to be repaired. Contact your Toyota dealer to service the vehicle.
7-3. Do-it-yourself maintenance Do-it-yourself service precautions If you perform maintenance by yourself, be sure to follow the correct procedure as given in these sections. Items Battery condition (P. 459) Parts and tools • Warm water • Baking soda • Grease • Conventional wrench (for terminal clamp bolts) Brake fluid level (P. 456) • FMVSS No.116 DOT 3 or SAE J1703 brake fluid • Rag or paper towel • Funnel (used only for adding brake fluid) Engine coolant level (P.
7-3. Do-it-yourself maintenance 447 WARNING The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become electrically energized. To avoid death or serious injury, observe the following precautions. ■ When working on the engine compartment ● Keep hands, clothing and tools away from the moving fan and engine drive belt. ● Be careful not to touch the engine, radiator, exhaust manifold, etc., right after driving as they may be hot.
7-3. Do-it-yourself maintenance Hood Release the lock from the inside of the vehicle to open the hood. 1 Pull the hood lock release lever. The hood will pop up slightly. 2 Pull up the auxiliary catch lever and lift the hood. 3 Hold the hood open by inserting the supporting rod into the slot.
7-3. Do-it-yourself maintenance 449 WARNING ■ Pre-driving check Check that the hood is fully closed and locked. If the hood is not locked properly, it may open while the vehicle is in motion and cause an accident, which may result in death or serious injury. ■ After installing the support rod into the slot Make sure the rod supports the hood securely from falling down on to your head or body. NOTICE ■ When closing the hood Be sure to return the support rod to its clip before closing the hood.
7-3. Do-it-yourself maintenance Engine compartment 2TR-FE engine 1 Washer fluid tank (P. 461) 6 Engine oil level dipstick 2 Radiator cap (P. 452) 3 Engine coolant reservoir 7 Brake fluid reservoir (P. 456) (P. 454) 4 Engine oil filler cap (P. 453) 8 Fuse box (P. 484) 5 Power steering fluid reservoir 9 Battery (P. 459) 10 Condenser (P. 456) 11 Radiator (P. 456) (P.
7-3. Do-it-yourself maintenance 451 2GR-FKS engine 1 Washer fluid tank (P. 461) 6 Engine oil filler cap (P. 453) 2 Power steering fluid reservoir 7 Brake fluid reservoir (P. 456) (P. 457) 3 Radiator cap 8 Fuse box (P. 484) 4 Engine oil level dipstick 9 Battery (P. 459) 10 Condenser (P. 456) 11 Radiator (P. 456) (P. 452) 5 Engine coolant reservoir Maintenance and care (P.
7-3. Do-it-yourself maintenance Engine oil With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil 1 Park the vehicle on level ground. After warming up the engine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine. 2 Holding a rag under the end, pull the dipstick out. 2TR-FE engine 2GR-FKS engine 3 Wipe the dipstick clean. 4 Reinsert the dipstick fully.
7-3. Do-it-yourself maintenance 453 ■ Adding engine oil If the oil level is below or near the low level mark, add engine oil of the same type as that already in the engine. 2TR-FE engine 2GR-FKS engine Make sure to check the oil type and prepare the items needed before adding oil. Engine oil selection P. 571 Oil quantity (Low Full) 1.6 qt. (1.5 L, 1.3 Imp.qt.) Items Clean funnel 1 Remove the oil filler cap by turning it counterclockwise. 2 Add engine oil slowly, checking the dipstick.
7-3. Do-it-yourself maintenance WARNING ■ Used engine oil ● Used engine oil contains potentially harmful contaminants which may cause skin disorders such as inflammation and skin cancer, so care should be taken to avoid prolonged and repeated contact. To remove used engine oil from your skin, wash thoroughly with soap and water. ● Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of used oil and filters in household trash, in sewers or onto the ground.
7-3. Do-it-yourself maintenance 455 ■ Coolant selection Only use “Toyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. U.S.A.: “Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50% deionized water. (Minimum temperature: -31F [-35C]) Canada: “Toyota Super Long Life Coolant” is a mixture of 55% coolant and 45% deionized water.
7-3. Do-it-yourself maintenance Radiator and condenser Check the radiator and condenser and clear away any foreign objects. If either of the above parts is extremely dirty or you are not sure of their condition, have your vehicle inspected by your Toyota dealer. WARNING ■ When the engine is hot Do not touch the radiator or condenser as they may be hot and cause serious injuries, such as burns.
7-3. Do-it-yourself maintenance 457 ■ Brake fluid can absorb moisture from the air Excess moisture in the brake fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid. WARNING ■ When filling the reservoir Take care as brake fluid can harm your hands and eyes and damage painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water immediately. If you still experience discomfort, see a doctor.
7-3. Do-it-yourself maintenance 2GR-FKS engine 1 Full (when cold) 2 Add fluid (when cold) 3 Full (when hot) 4 Add fluid (when hot) Hot: Vehicle has been driven around 50 mph (80 km/h) for 20 minutes, or slightly longer in frigid temperatures. (Fluid temperature, 140°F - 175°F [60°C - 80°C]) Cold: Engine has not been run for about 5 hours. (Room temperature, 50°F - 85°F [10°C - 30°C]) ■ Checking the fluid level Make sure to check the fluid type and prepare the necessary items.
7-3. Do-it-yourself maintenance 459 Battery Check the battery as follows: ■ Battery exterior Make sure that the battery terminals are not corroded and that there are no loose connections, cracks, or loose clamps. 1 Terminals 2 Hold-down clamp ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, observe the following before recharging: ● If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable.
7-3. Do-it-yourself maintenance WARNING ■ Chemicals in the battery Batteries contain poisonous and corrosive sulfuric acid and may produce hydrogen gas which is flammable and explosive. To reduce the risk of death or serious injury, take the following precautions while working on or near battery: ● Do not cause sparks by touching the battery terminals with tools. ● Do not smoke or light a match near the battery. ● Avoid contact with eyes, skin and clothes. ● Never inhale or swallow electrolyte.
7-3. Do-it-yourself maintenance 461 Washer fluid Add washer fluid in the following situations: ● A washer does not work. ● The low washer fluid warning light comes on or warning message appears on the display (for Canada only). WARNING ■ When adding washer fluid Do not add washer fluid when the engine is hot or running as washer fluid contains alcohol and may catch fire if spilled on the engine, etc.
7-3. Do-it-yourself maintenance Tires Replace or rotate tires in accordance with maintenance schedules and treadwear. Checking tires Check if the treadwear indicators are showing on the tires. Also check the tires for uneven wear, such as excessive wear on one side of the tread. Check the spare tire condition and pressure if not rotated. 1 New tread 2 Worn tread 3 Treadwear indicator The location of treadwear indicators is shown by a “TWI” or “” mark, etc., molded into the sidewall of each tire.
7-3. Do-it-yourself maintenance 463 Tire pressure warning system (if equipped) Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise. ● If the tire pressure drops below a predetermined level, the driver is warned by a warning light. (P.
7-3. Do-it-yourself maintenance ■ How to initialize the tire pressure warning system 1 Vehicles without a smart key system: Park the vehicle in a safe place and turn the engine switch to the “LOCK” position. Vehicles with a smart key system: Park the vehicle in a safe place and turn the engine switch off. Initialization cannot be performed while the vehicle is moving. 2 Adjust the tire inflation pressure to the specified cold tire inflation pressure level. (P.
7-3. Do-it-yourself maintenance 465 Vehicles without a multi-information display 5 Vehicles without a smart key system: Wait for a few minutes with the engine switch in the “ON” position and then turn the engine switch to the “LOCK” position. Vehicles with a smart key system: Wait for a few minutes with the engine switch in IGNITION ON mode and then turn the engine switch off.
7-3. Do-it-yourself maintenance ■ When to replace your vehicle’s tires Tires should be replaced if: ● The treadwear indicators are showing on a tire. ● You have tire damage such as cuts, splits, cracks deep enough to expose the fabric, and bulges indicating internal damage ● A tire goes flat repeatedly or cannot be properly repaired due to the size or location of a cut or other damage If you are not sure, consult with your Toyota dealer.
7-3. Do-it-yourself maintenance 467 ■ Maximum load of tire Check that the number given by dividing the maximum load by 1.10 of the replacement tire is greater than 1/2 of the Gross Axle Weight Ratings (GAWR) of either the front axle or the rear axle, whichever is greater. For the GAWR, see the Certification Access Cab models Label. For the maximum load of the tire, see the load limit at maximum cold tire inflation pressure mentioned on the sidewall of the tire. (P.
7-3. Do-it-yourself maintenance ■ Initializing the tire pressure warning system (if equipped) Initialize the system with the tire inflation pressure adjusted to the specified level. ■ If the tread on snow tires wears down below 0.16 in. (4 mm) The effectiveness of the tires as snow tires is lost. ■ Situations in which the tire pressure warning system may not operate properly (if equipped) ● In the following cases, the tire pressure warning system may not operate properly.
7-3. Do-it-yourself maintenance 469 ■ The initialization operation (vehicles with the tire pressure warning 7 Maintenance and care system) ● Make sure to carry out initialization after adjusting the tire inflation pressure. Also, make sure the tires are cold before carrying out initialization or tire inflation pressure adjustment.
7-3. Do-it-yourself maintenance ■ Tire pressure warning system certification (if equipped) FCC ID: HYQ23AAK NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
7-3. Do-it-yourself maintenance 471 NOTICE ■ Repairing or replacing tires, wheels, tire pressure warning valves, 7 Maintenance and care transmitters and tire valve caps (vehicles with the tire pressure warning system) ● When removing or fitting the wheels, tires or the tire pressure warning valves and transmitters, contact your Toyota dealer as the tire pressure warning valves and transmitters may be damaged if not handled correctly. ● Make sure to install the tire valve caps.
7-3. Do-it-yourself maintenance Tire inflation pressure Tire inflation pressure The recommended cold tire inflation pressure and tire size are displayed on the tire and loading information label. (P.
7-3. Do-it-yourself maintenance 473 Inspection and adjustment procedure 1 Tire valve 2 Tire pressure gauge 1 Remove the tire valve cap. 2 Press the tip of the tire pressure gauge onto the tire valve. 3 Read the pressure using the gauge gradations. 4 If the tire inflation pressure is not at the recommended level, adjust the pressure. If you add too much air, press the center of the valve to deflate.
7-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressure, observe the following: ● Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.5 km, you will get an accurate cold tire inflation pressure reading. ● Always use a tire pressure gauge. It is difficult to judge if a tire is properly inflated based only on its appearance.
7-3. Do-it-yourself maintenance 475 Wheels If a wheel is bent, cracked or heavily corroded, it should be replaced. Otherwise, the tire may separate from the wheel or cause a loss of handling control. Wheel selection When replacing wheels, care should be taken to ensure that they are equivalent to those removed in load capacity, diameter, rim width and inset*. Replacement wheels are available at your Toyota dealer. *: Conventionally referred to as “offset”.
7-3. Do-it-yourself maintenance ■ When replacing wheels (vehicles with the tire pressure warning sys- tem) The wheels of your vehicle are equipped with tire pressure warning valves and transmitters that allow the tire pressure warning system to provide advance warning in the event of a loss in tire inflation pressure. Whenever wheels are replaced, tire pressure warning valves and transmitters must be installed. (P.
7-3. Do-it-yourself maintenance 477 NOTICE ■ Replacing tire pressure warning valves and transmitters (vehicles with the tire pressure warning system) ● Because tire repair or replacement may affect the tire pressure warning valves and transmitters, make sure to have tires serviced by your Toyota dealer or other qualified service shop. In addition, make sure to purchase your tire pressure warning valves and transmitters at your Toyota dealer.
7-3. Do-it-yourself maintenance Air conditioning filter The air conditioning filter must be changed regularly to maintain air conditioning efficiency. Removal method 1 Turn the engine switch off. 2 Open the glove box. 3 Remove the tray. 4 Remove the cover by sliding up and then pull the cover toward you.
7-3. Do-it-yourself maintenance 479 5 Remove the filter cover. 6 Pull the filter out of the filter out- let. Replacement method Remove the air conditioning filter and replace it with a new one. When installing the filter, follow the instructions indicated on the label. 7 Maintenance and care ■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required.
7-3. Do-it-yourself maintenance NOTICE ■ When using the air conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system.
7-3. Do-it-yourself maintenance 481 Wireless remote control/electronic key battery Replace the battery with a new one if it is depleted. You will need the following items: ● Flathead screwdriver ● Small flathead screwdriver ● Lithium battery CR2016 (vehicles without a smart key system), or CR2032 (vehicles with a smart key system) Replacing the battery Vehicles without a smart key system 1 Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag.
7-3. Do-it-yourself maintenance 3 Open the case cover using a coin protected with tape, etc., and remove the depleted battery using a small flathead screwdriver. Insert a new battery with the “+” terminal facing up. Vehicles with a smart key system 1 Take out the mechanical key. 2 Remove the cover. To prevent damage to the key, cover the tip of the screwdriver with a rag. 3 Remove the depleted battery. Insert a new battery with the “+” terminal facing up.
7-3. Do-it-yourself maintenance 483 ■ Use a CR2016 (vehicles without a smart key system) or CR2032 (vehicles with a smart key system) lithium battery ● Batteries can be purchased at your Toyota dealer, local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manufacturer. ● Dispose of used batteries according to local laws.
7-3. Do-it-yourself maintenance Checking and replacing fuses If any of the electrical components do not operate, a fuse may have blown. If this happens, check and replace the fuses as necessary. 1 Turn the engine switch off. 2 Open the fuse box cover. Engine compartment Push the tabs in and lift the cover off. Under the instrument panel Remove the cover. 3 Remove the fuse with the pull- out tool. Only type A fuse can be removed using the pullout tool.
7-3. Do-it-yourself maintenance 485 4 Check if the fuse is blown. 1 Normal fuse 2 Blown fuse Type A and B: Replace the blown fuse with a new fuse of an appropriate amperage rating. The amperage rating can be found on the fuse box cover. Type C: Contact your Toyota dealer. Type A Type C Type B 7 Maintenance and care ■ After a fuse is replaced ● If the lights do not turn on even after the fuse has been replaced, a bulb may need replacement. (P.
7-3. Do-it-yourself maintenance WARNING ■ To prevent system breakdowns and vehicle fire Observe the following precautions. Failure to do so may cause damage to the vehicle, and possibly a fire or injury. ● Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse. ● Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. ● Do not modify the fuses or fuse boxes.
7-3. Do-it-yourself maintenance 487 Light bulbs You may replace the following bulbs by yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. Preparing for light bulb replacement Check the wattage of the light bulb to be replaced. (P.
7-3.
7-3. Do-it-yourself maintenance 489 Replacing light bulbs ■ Headlight low beam 1 Unplug the connector while pressing the lock release. 2 Turn the bulb base counter- clockwise. 3 Set the new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn it clockwise to set. After installing the connector, shake the bulb base gently to check that it is not loose, turn the headlight low beams on once and visually confirm that no light is leaking through the mounting.
7-3. Do-it-yourself maintenance ■ Headlight high beam 1 Unplug the connector while pressing the lock release. 2 Turn the bulb base counter- clockwise. 3 Set the new light bulb. Align the 3 tabs on the light bulb with the mounting and insert. Turn it clockwise to set. 4 Install the connector. After installing the connector, shake the bulb base gently to check that it is not loose, turn the headlight high beams on once and visually confirm that no light is leaking through the mounting.
7-3. Do-it-yourself maintenance 491 ■ Front side marker lights 1 To allow enough working space, turn the steering wheel to the opposite side of the bulb to be replaced. Remove the fender liner clip and screw. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replacing the left side light bulb. 2 Open the fender liner and turn the bulb counterclockwise.
7-3. Do-it-yourself maintenance 3 Remove the light bulb. 4 Reinstall the fender liner and install the clip and screw. ■ Front turn signal lights/parking lights (bulb type)/daytime run- ning lights (bulb type) 1 Turn the bulb base counter- clockwise. 2 Remove the light bulb. 3 When installing, reverse the steps listed.
7-3. Do-it-yourself maintenance 493 ■ Front fog lights (if equipped) 1 To allow enough working space, turn the steering wheel to the opposite side of the bulb to be replaced. Remove the fender liner clip and screw. Turn the steering wheel to the left when replacing the right side light bulb, and turn the steering wheel to the right when replacing the left side light bulb. 2 Open the fender liner and unplug the connector while depressing the lock release.
7-3. Do-it-yourself maintenance 3 Turn the bulb counterclock- wise. 4 Set the new light bulb. Align the 3 tabs on the light bulb with the mounting, and insert. Turn it clockwise to set. 5 Install the connector. Shake the bulb base gently to check that it is not loose, turn the fog lights, on once and visually confirm that no light is leaking through the mounting. 6 Reinstall the fender liner and install the clip and screw.
7-3. Do-it-yourself maintenance 495 ■ Tail/rear turn signal/rear side marker lights, stop/tail/rear side marker lights and back-up lights 1 Remove the bolts and rear combination assembly. 2 Turn the bulb bases counter- clockwise. 1 Tail/rear turn signal/rear side marker lights 2 Stop/tail/rear side marker lights 3 Back-up lights 3 Remove the light bulb.
7-3. Do-it-yourself maintenance ■ License plate lights 1 Turn the bulb base counter- clockwise. 2 Remove the light bulb. 3 When installing, reverse the steps listed.
7-3. Do-it-yourself maintenance 497 ■ High mounted stoplight (vehicles without a cargo lamp) 1 Remove the screws and cover. 2 Remove the light bulb. When reinstalling the outer lens, confirm that the packing is properly seated in the groove on the housing. Packing ■ Replacing the following bulbs If any of the lights listed below has burnt out, have it replaced by your Toyota dealer.
7-3. Do-it-yourself maintenance ■ LED Lights The side turn signal lights (if equipped), parking lights (LED type), daytime running light (LED type) and, high mounted stoplight (vehicles with cargo lamp) consist of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
When trouble arises 8-1. Essential information Emergency flashers .......... 500 If your vehicle has to be stopped in an emergency ................. 501 8 8-2. Steps to take in an emergency If your vehicle needs to be towed ......................... 503 If you think something is wrong .............................. 508 Fuel pump shut off system ............................ 509 If a warning light turns on or a warning buzzer sounds ............................
8-1. Essential information Emergency flashers The emergency flashers are used to warn other drivers when the vehicle has to be stopped in the road due to a breakdown, etc. Press the switch. All the turn signal lights will flash. To turn them off, press the switch once again. ■ Emergency flashers If the emergency flashers are used for a long time while the engine is not operating, the battery may discharge.
8-1. Essential information 501 If your vehicle has to be stopped in an emergency Only in an emergency, such as if it becomes impossible to stop the vehicle in the normal way, stop the vehicle using the following procedure: 1 Steadily step on the brake pedal with both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle. 2 Shift the shift lever to N.
8-1. Essential information WARNING ■ If the engine has to be turned off while driving ● Power assist for the brakes and steering wheel will be lost, making the brake pedal harder to depress and the steering wheel heavier to turn. Decelerate as much as possible before turning off the engine. ● Vehicles without a smart key system: Never attempt to remove the key, as doing so will lock the steering wheel.
8-2. Steps to take in an emergency 503 If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or commercial towing service, using a wheel-lift type truck or flatbed truck. Use a safety chain system for all towing, and abide by all state/ provincial and local laws. Situations when it is necessary to contact dealers before towing The following may indicate a problem with your transmission.
8-2. Steps to take in an emergency From the rear Use a towing dolly under the front wheels. Using a flatbed truck If your vehicle is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. Type A Front If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45. Do not overly tighten the tie downs or the vehicle may be damaged.
8-2. Steps to take in an emergency 505 Emergency towing If a tow truck is not available in an emergency, your vehicle may be temporarily towed using cables or chains secured to the emergency towing hook(s). This should only be attempted on hard surfaced roads for at most 50 miles (80 km) at under 18 mph (30 km/h). A driver must be in the vehicle to steer and operate the brakes. The vehicle’s wheels, drivetrain, axles, steering and brakes must be in good condition.
8-2. Steps to take in an emergency WARNING Observe the following precautions. Failure to do so may result in death or serious injury. ■ When towing the vehicle 2WD models: Be sure to transport the vehicle with all four wheels raised off the ground. If the vehicle is towed with the tires contacting the ground, the drivetrain and related parts may be damaged or an accident may occur due to a change in direction of the vehicle.
8-2. Steps to take in an emergency 507 NOTICE ■ To prevent damage to the vehicle when towing using a wheel-lift type truck ● Vehicles without a smart key system: Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed. The steering lock mechanism is not strong enough to hold the front wheels straight. ● Vehicles with a smart key system: Do not tow the vehicle from the rear when the engine switch is off.
8-2. Steps to take in an emergency If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. Visible symptoms ● Fluid leaks under the vehicle. (Water dripping from the air conditioning after use is normal.) ● Flat-looking tires or uneven tire wear ● Engine coolant temperature gauge needle continually points higher than normal.
8-2. Steps to take in an emergency 509 Fuel pump shut off system To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops supply of fuel to the engine. Follow the procedure below to restart the engine after the system is activated. 1 Vehicles without a smart key system: Turn the engine switch to the “ACC” or “LOCK” position. Vehicles with a smart key system: Turn the engine switch to ACCESSORY or turn it off.
8-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Warning light and warning buzzer list Warning light Warning light/Details/Actions (U.S.A.
8-2. Steps to take in an emergency 511 Warning light Warning light/Details/Actions (U.S.A.) ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system Have the vehicle inspected by your Toyota dealer immediately.
8-2. Steps to take in an emergency Warning light (Flashes rapidly) (Flashes rapidly) (Flashes) Warning light/Details/Actions Four-wheel drive indicator light*2, 4 Indicates that the differential oil temperature is too high when the light flashes rapidly and a buzzer sound. Immediately stop the vehicle in a safe place, turn the front-wheel drive control switch to “2WD”, and wait until the warning light goes off.
8-2. Steps to take in an emergency Warning light 513 Warning light/Details/Actions Master warning light (warning buzzer)*5 A buzzer sounds and the warning light comes on and flashes to indicate that the master warning system has detected a malfunction. P. 519 (If equipped) (Comes on or flashes) BSM warning light*2 Indicates a malfunction in the Blind Spot Monitor. Have the vehicle inspected by your Toyota dealer immediately.
8-2. Steps to take in an emergency Warning light Warning light/Details/Actions Low engine oil level warning light*2, 9 Indicates that engine oil level is low Check the level of engine oil and add more oil if necessary. (U.S.A.) Maintenance required reminder light*2 Indicates that maintenance is required according to the driven distance on the maintenance schedule.
8-2. Steps to take in an emergency 515 *7: Driver’s seat belt buzzer: The driver’s seat belt buzzer sounds to alert the driver that his or her seat belt is not fastened. Once the engine switch is turned to the “ON” or “START” position mode, the buzzer sounds for 6 seconds. If the vehicle reaches a speed of 12 mph (20 km/h), the buzzer sounds once. If the seat belt is still unfastened after 24 seconds, the buzzer will sound intermittently for 10 seconds.
8-2. Steps to take in an emergency ■ If the malfunction indicator lamp comes on while driving First check the following: ● Is the fuel tank empty? If it is, fill the fuel tank immediately. ● Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible.
8-2. Steps to take in an emergency 517 WARNING ■ If both the ABS and the brake system warning lights remain on Stop your vehicle in a safe place immediately and contact your Toyota dealer. The vehicle will become extremely unstable during braking, and the ABS system may fail, which could cause an accident resulting in death or serious injury. ■ If the tire pressure warning light comes on (if equipped) Be sure to observe the following precautions.
8-2. Steps to take in an emergency WARNING Please note that the TPMS (tire pressure warning system) is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).
8-2. Steps to take in an emergency 519 If a warning message is displayed (vehicles with a multi-information display) If a warning is shown on the multi-information display, stay calm and perform the following actions: 1 Master warning light The master warning light also comes on or flashes in order to indicate that a message is currently being displayed on the multiinformation display.
8-2. Steps to take in an emergency Warning message Details/Actions (If equipped) Indicates that the automatic transmission fluid temperature is too high. A buzzer also sounds. Immediately stop the vehicle in a safe place, shift the shift lever to P and wait until the message and light go off. If the message and light go off, you may start the vehicle again. If the message and light do not go off, contact your Toyota dealer. Indicates that the engine coolant temperature is too high.
8-2. Steps to take in an emergency Warning message (U.S.A.) 521 Details/Actions Indicates a malfunction in: • The ABS; or • The brake assist system A buzzer also sounds. Have the vehicle inspected by your Toyota dealer. (Canada) (U.S.A.
8-2. Steps to take in an emergency Warning message Details/Actions Indicates a malfunction in the cruise control system. Press the “ON-OFF” button once to deactivate the system, and then press the button again to reactivate the system. A buzzer also sounds. Have the vehicle inspected by your Toyota dealer. (If equipped) Indicates a malfunction in the Brake Override System. A buzzer also sounds. Have the vehicle inspected by your Toyota dealer. Indicates that the engine oil level is low.
8-2. Steps to take in an emergency Warning message 523 Details/Actions Indicates that the tire inflation pressure is low. Check the tire inflation pressure, and adjust to the appropriate level. (If equipped) Indicates that the washer fluid level is low. Add washer fluid. (Canada only) Indicates that remaining fuel is approximately 3.2 gal. (12.0 L, 2.6 Imp.gal.) or less Refuel the vehicle.
8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the front differential oil temperature is too high. Drop your speed or stop the vehicle until the message and light go off. If the message and light do not go off, contact your Toyota dealer. (Flashes) (4WD models only) Indicates that the front differential oil temperature is too high. Turn the front-wheel drive control switch to “2WD” (P.
8-2. Steps to take in an emergency Warning message Details/Actions Indicates that the hood is not fully closed. If the vehicle reaches a speed of 3 mph (5 km/h), (If equipped) flashes and a buzzer sounds to indicate that the hood is not yet fully closed. Close the hood. Indicates a malfunction in the intuitive parking assist. The malfunctioning assist-sensor is flashing. Have the vehicle inspected by your Toyota dealer immediately.
8-2. Steps to take in an emergency Warning message Details/Actions Indicates a malfunction in the smart key system. A buzzer also sounds. Have the vehicle inspected by your Toyota dealer. (Flashes) (If equipped) Indicates that a Blind Spot Monitor sensor or the surrounding area on the bumper is dirty or covered with ice. A buzzer also sounds. Clean the sensor and its surrounding area on the bumper. (If equipped) Indicates a malfunction in the BSM (Blind Spot Monitor) system.
8-2. Steps to take in an emergency Warning message 527 Details/Actions Indicates that the moon roof is not fully closed (with the engine switch off, and the driver’s door open). A buzzer also sounds. Close the moon roof. (Flashes) (If equipped) Indicates that the Crawl Control is not available. Select the four-wheel drive control switch in “4L” and shift the shift lever to D or R. (If equipped) Indicates that the Crawl Control is not available. Confirm the operating conditions of Crawl Control.
8-2. Steps to take in an emergency Warning message Details/Actions (U.S.A. only) Indicates that all maintenance is required to correspond to the driven distance on the maintenance schedule*2. Comes on approximately 5000 miles (8000 km) after the message has been reset. (The indicator will not work properly unless the message has been reset.) Perform the necessary maintenance. Please reset the message after the maintenance is performed. (P. 441) Indicates that the system fails to reset.
8-2. Steps to take in an emergency Warning message 529 Details/Actions Indicates that the Multi-terrain Select is canceled while in use. A buzzer also sounds. Use the Multi-terrain Select under the proper operating conditions. (P. 255) (If equipped) Indicates that the Multi-terrain Select cannot be operated because Crawl Control is operating. Turn Crawl Control off. (P. 259) (If equipped) *1: The buzzer sounds when Multi-terrain Select or active traction control is equipped.
8-2. Steps to take in an emergency Have the malfunction repaired immediately. (vehicles with a smart key system) After taking the specified steps to correct the suspected problem, check that the warning message and light go off. Interior Exterior buzzer buzzer Continuous Warning message Details/Actions The driver’s door was opened when the shift lever was not in P and the engine switch was not turned off. Shift the shift lever to P.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Warning message Details/Actions The driver’s door was opened and closed while the electronic key was not in the vehicle, the shift lever was in P and the engine switch was not turned off. Turn the engine switch off. Bring the electronic key back into the vehicle.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Warning message Details/Actions The electronic key is not detected when an attempt is made to start the engine. Start the engine with the electronic key present. (Flashes) 9 times An attempt was made to drive when the electronic key was not inside the vehicle. Confirm that the electronic key is inside the vehicle.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Once Warning message Details/Actions The electronic key has a low battery. Replace the electronic key battery. (P. 481) The steering lock could not be released within 3 seconds of the engine switch being pressed. Press the engine switch while depressing the brake pedal and moving the steering wheel left and right.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Once Warning message Details/Actions Indicates that: • With the engine switch off, the doors were unlocked and then the driver’s door was opened and closed • The engine switch was turned to ACCESSORY mode without starting the engine Press the engine switch while depressing the brake pedal. The engine switch has been turned off with the shift lever in a position other than P. Shift the shift lever to P.
8-2. Steps to take in an emergency Interior Exterior buzzer buzzer Once Warning message (Flashes) 535 Details/Actions During a engine starting procedure in the event that the electronic key was not functioning properly (P. 555), the engine switch was touched with the electronic key. Press the engine switch within 10 seconds of the buzzer sounding. ■ Warning buzzer P.
8-2. Steps to take in an emergency If you have a flat tire Your vehicle is equipped with a spare tire. The flat tire can be replaced with the spare tire. For details about tires: P. 462 WARNING ■ If you have a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair, which could result in an accident. Before jacking up the vehicle ● Stop the vehicle on a hard, flat surface. ● Set the parking brake.
8-2.
8-2. Steps to take in an emergency WARNING ■ Using the tire jack Observe the following precautions. Improper use of the tire jack may cause the vehicle to suddenly fall off the jack, leading to death or serious injury. ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains. ● Only use the tire jack that comes with this vehicle for replacing a flat tire.
8-2. Steps to take in an emergency 539 Taking out the jack and tool bag (Access Cab models) 1 Vehicles with rear seats: Pull up the lever and raise the bottom cushion up. 2 Turn the knob counterclock- wise. 3 Open the lid. Vehicles with rear seats: Press the lid against the bottom of the lower cushion until it is supported by the hook-and-loop fastener. Make sure that the lid is supported to prevent it from closing unexpectedly. remove the tool bag.
8-2. Steps to take in an emergency 5 Unhook the rubber band and take out the jack. 1 For loosening 2 For tightening Taking out the jack and tool bag (Double Cab models) 1 Swing the bottom cushion up by pulling the lock release strap. 2 Turn the knob counterclockwise and open the lid. 3 Unhook the rubber band and remove the tool bag.
8-2. Steps to take in an emergency 541 4 Unhook the rubber band and take out the jack. 1 For loosening 2 For tightening Taking out the spare tire 1 Assemble the jack extension as shown. handle 2 Insert the end of the jack han- dle extension into the lowering screw and turn it counterclockwise. 8 3 After the tire is lowered comWhen trouble arises pletely to the ground, remove the holding bracket.
8-2. Steps to take in an emergency Replacing a flat tire 1 Chock the tires. Flat tire Front Rear Wheel chock positions Left-hand side Behind the rear right-hand side tire Right-hand side Behind the rear left-hand side tire Left-hand side In front of the front right-hand side tire Right-hand side In front of the front left-hand side tire 2 Slightly loosen the wheel nuts (one turn). 3 Assemble the jack extension as shown.
8-2. Steps to take in an emergency 543 4 Position the jack at the correct jack point as shown. 1 Front 2 Rear Make sure the jack is positioned on a level and solid place. Front 5 Raise the vehicle until the tire is slightly raised off the ground. When positioning the jack under the rear axle housing, make sure the groove on the top of the jack fits with the rear axle housing. Make sure to use only the jack point indicated. Use only this area as jack point. 6 Remove all the wheel nuts and the tire.
8-2. Steps to take in an emergency WARNING ■ Replacing a flat tire ● Observe the following precautions. Failure to do so may result in serious injury: • Lower the spare tire completely to the ground before removing it from under the vehicle. • Do not try to remove the wheel ornament by hand. Take due care in handling the ornament to avoid unexpected personal injury. • Do not touch the disc wheels or the area around the brakes immediately after the vehicle has been driven.
8-2. Steps to take in an emergency 2 Install the spare tire and loosely tighten each wheel nut by hand by approximately the same amount. Replacing a steel wheel with a spare steel wheel Tighten the nuts until the tapered portion comes into loose contact with the disc wheel sheet. Tapered portion Disc wheel sheet Replacing an aluminum wheel with a spare steel wheel Tighten the nuts until the tapered portion comes into loose contact with the disc wheel sheet.
8-2. Steps to take in an emergency 3 Lower the vehicle. 4 Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 83 ft·lbf (113 N·m, 11.5 kgf·m) WARNING ■ Stowing the flat tire Failure to follow steps listed under stowing the tire may result in damage to the spare tire carrier and loss of the tire, which could result in death or serious injury.
8-2. Steps to take in an emergency Stowing the flat tire, jack and all tools 1 Remove the center wheel ornament by pushing from the reverse side. 2 Lay down the tire with the valve stem facing up and install the holding bracket, inserting the claw into the wheel lug nut hole. Turn the jack handle extension clockwise to take up slack in the chain. incorrect Then, check to ensure the claw is in the wheel lug nut hole and the holding bracket is centered in the wheel hub.
8-2. Steps to take in an emergency ■ The temporary spare tire ● The temporary spare tire is identified by the label “TEMPORARY USE ONLY” on the disc wheel. Use the temporary spare tire temporarily, and only in an emergency. ● Make sure to check the tire inflation pressure of the temporary spare tire. (P. 577) ■ After completing the tire change (vehicles with the tire pressure warning system) The tire pressure warning system must be reset. (P.
8-2. Steps to take in an emergency 549 WARNING ■ When using the temporary spare tire ● Remember that the temporary spare tire provided is specifically 8 When trouble arises designed for use with your vehicle. Do not use your temporary spare tire on another vehicle. ● Do not use more than one temporary spare tires simultaneously. ● Replace the temporary spare tire with a standard tire as soon as possible.
8-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat tire Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair. ■ Driving with tire chains and the temporary spare tire Do not fit tire chains to the temporary spare tire. Tire chains may damage the vehicle body and adversely affect driving performance.
8-2. Steps to take in an emergency 551 If the engine will not start If the engine will not start even though correct starting procedures are being followed (P. 187, 190), consider each of the following points. The engine will not start even though the starter motor operates normally. One of the following may be the cause of the problem: ● There may not be sufficient fuel in the vehicle’s tank. Refuel the vehicle. ● The engine may be flooded.
8-2. Steps to take in an emergency The starter motor does not turn over, the interior lights and headlights do not turn on, or the horn does not sound. One of the following may be the cause of the problem: ● One or both of the battery terminals may be disconnected. ● The battery may be discharged. (P. 557) ● There may be a malfunction in the steering lock system (vehicles with a smart key system). Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
8-2. Steps to take in an emergency 553 If the shift lever cannot be shifted from P (vehicles with an automatic transmission) If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted: 1 Set the parking brake.
8-2. Steps to take in an emergency 5 Press the shift lock override button. The shift lever can be shifted while the button is pressed.
8-2. Steps to take in an emergency 555 If the electronic key does not operate properly (vehicles with a smart key system) If communication between the electronic key and vehicle is interrupted (P. 124) or the electronic key cannot be used because the battery is depleted, the smart key system and wireless remote control cannot be used. In such cases, the doors can be opened and the engine can be started by following the procedure below. Locking and unlocking the doors Use the mechanical key (P.
8-2. Steps to take in an emergency ■ Stopping the engine Shift the shift lever to P and press the engine switch as you normally do when stopping the engine. ■ Replacing the key battery As the above procedure is a temporary measure, it is recommended that the electronic key battery be replaced immediately when the battery is depleted. (P. 481) ■ Changing engine switch modes Within 10 seconds of the buzzer sounding, release the brake pedal and press the engine switch.
8-2. Steps to take in an emergency 557 If the vehicle battery is discharged The following procedures may be used to start the engine if the vehicle’s battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle by following the steps below. 1 Confirm that the key is being carried.
8-2. Steps to take in an emergency 2GR-FKS engine 1 Connect a positive jumper cable clamp to the positive (+) battery terminal on your vehicle. 2 Connect the clamp on the other end of the positive cable to the positive (+) battery terminal on the second vehicle. 3 Connect a negative cable clamp to the negative (-) battery termi- nal on the second vehicle.
8-2. Steps to take in an emergency 559 ■ Starting the engine when the battery is discharged (vehicles with an automatic transmission) The engine cannot be started by push-starting. ■ To prevent battery discharge ● Turn off the headlights and the audio system while the engine is off. ● Turn off any unnecessary electrical components when the vehicle is running at a low speed for an extended period, such as in heavy traffic.
8-2. Steps to take in an emergency WARNING ■ Avoiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flammable gas that may be emitted from the battery: ● Make sure each jumper cable is connected to the correct terminal and that it is not unintentionally in contact with any other than the intended terminal.
8-2. Steps to take in an emergency 561 If your vehicle overheats The following may indicate that your vehicle is overheating: ● The needle of the engine coolant temperature gauge (P. 88) enters the red zone or a loss of engine power is experienced. (For example, the vehicle speed does not increase.) ● “High Engine Coolant Temperature” is shown on the multi-information display. (if equipped) ● Steam comes out from under the hood.
8-2. Steps to take in an emergency 5 Add coolant if necessary. Water can be used in an emergency if coolant is unavailable. 6 Start the engine to check that the radiator cooling fan operates and to check for coolant leaks from the radiator or hoses. 7 If the fan is not operating: Stop the engine immediately and contact your Toyota dealer. If the fan is operating: Have the vehicle inspected at the nearest Toyota dealer.
8-2. Steps to take in an emergency 563 If the vehicle becomes stuck Carry out the following procedures if the tires spin or the vehicle becomes stuck in mud, dirt or snow: 1 Stop the engine. Set the parking brake and shift the shift lever to P (automatic transmission) or N (manual transmission). 2 Remove the mud, snow or sand from around the rear wheels. 3 Place wood, stones or some other material to help provide traction under the rear wheels. 4 Restart the engine.
8-2. Steps to take in an emergency NOTICE ■ To avoid damage to the transmission and other components ● Avoid spinning the rear wheels and depressing the accelerator pedal more than necessary. ● If the vehicle remains stuck even after these procedures are performed, the vehicle may require towing to be freed.
Vehicle specifications 9 9-1. Specifications Maintenance data (fuel, oil level, etc.) .......... 566 Fuel information ................ 579 Tire information ................. 582 9-2. Customization Customizable features ...... 592 9-3. Items to initialize Items to initialize ...............
9-1. Specifications Maintenance data (fuel, oil level, etc.) Dimensions Cab type Access Cab Overall length 212.3 in. (5392.3 mm) Overall width 74.4 in. (1890.5 mm) Overall height* 70.6 in. (1792.2 mm) Wheelbase 127.8 in. (3247 mm) Front tread 63.0 in. (1599 mm) 63.3 in. (1609 mm)*2 Rear tread 63.2 in. (1606 mm) 63.6 in. (1616 mm)*2 1 Double Cab Cab type With short deck With long deck Overall length 212.3 in. (5392.3 mm) 225.5 in. (5727.3 mm) Overall width 74.4 in. (1890.5 mm) 75.
9-1. Specifications 567 Vehicle capacity weight Access Cab models Model code* 1 Engine TRN265L-CRTSKA TRN245L-CRMSKA Driving Deck type system GRN325L-CRTSHA GRN305L-CRTSHA 2WD 2GR-FKS engine 1350 lb. (610 kg) 4WD TRN245L-CRTSKA GRN305L-CRFSHA 1500 lb. (680 kg) 2WD 2TR-FE engine 4WD Vehicle capacity weight (Occupants + luggage)*2 Long deck 1300 lb. (585 kg) 1400 lb. (635 kg) 1100 lb. (495 kg) 1150 lb. (520 kg) *1: The model code is indicated on the Certification Label. (P.
9-1. Specifications Double Cab models Model code* Engine TRN265L-PRTSKA 2TR-FE engine 1 Driving Deck type system 1400 lb. (635 kg) Short deck GRN325L-PRTSHA GRN330L-PRTSHA Long deck GRN330L-PRTLHA GRN305L-PRFSHA GRN310L-PRTSHA GRN310L-PRTLHA 1200 lb. (540 kg) 1200 lb. (540 kg) 950 lb. (430 kg) 2GR-FKS engine Short deck GRN305L-PRTSHA GRN305L-PRTLHA 1200 lb. (540 kg) 1250 lb. (565 kg) 2WD GRN325L-PRTLHA Vehicle capacity weight (Occupants + luggage)*2 1000 lb. (450 kg) 1000 lb.
9-1. Specifications 569 Vehicle identification ■ Vehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle. This number is stamped on the top left of the instrument panel. This number is also on the Certification Label. Access Cab models Double Cab models ■ Engine number The engine number is stamped on the engine block as shown.
9-1. Specifications Engine 2TR-FE engine Model 2TR-FE Type 4-cylinder in line, 4-cycle, gasoline Bore and stroke 3.74 3.74 in. (95.0 95.0 mm) Displacement 164.3 cu.in. (2694 cm3) Drive belt tension Automatic adjustment Valve clearance (engine cold) Automatic adjustment 2GR-FKS engine Model 2GR-FKS Type 6-cylinder V type, 4-cycle, gasoline Bore and stroke 3.70 x 3.28 in. (94.0 x 83.0 mm) Displacement 210.9 cu.in.
9-1. Specifications 571 Lubrication system Oil capacity (Drain and refill—reference*) 2TR-FE engine 2GR-FKS engine With filter Without filter 6.2 qt. (5.9 L, 5.2 Imp.qt.) without towing 6.1 qt. package (5.8 L, 5.1 Imp.qt.) with towing 6.2 qt. package (5.9 L, 5.2 Imp.qt.) 5.8 qt. (5.5 L, 4.8 Imp.qt.) 5.9 qt. (5.6 L, 4.9 Imp.qt.) *: The engine oil capacity is a reference quantity to be used when changing the engine oil.
9-1. Specifications Oil viscosity (0W-20 is explained here as an example): • The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather. • The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature.
9-1. Specifications 573 Cooling system Vehicles with an automatic transmission 2TR-FE engine 9.1 qt. (8.6 L, 7.6 Imp.qt.) Vehicles with a manual transmission 9.2 qt. (8.7 L, 7.7 Imp.qt.) Vehicles with an automatic transmission Capacity 2GR-FKS engine Coolant type Without towing package: 10.5 qt. (9.9 L, 8.7 Imp.qt.) With towing package: 11.1 qt. (10.5 L, 9.2 Imp.qt.) Vehicles with a manual transmission Without towing package: 10.1 qt. (9.6 L, 8.4 Imp.qt.) With towing package: 10.8 qt. (10.
9-1. Specifications Electrical system Battery Open voltage at 68F 12.6 12.8 V Fully charged (20C): 12.2 12.4 V Half charged 11.8 12.0 V Discharged (Voltage is checked 20 minutes after the engine and all lights are turned off.) Charging rates 5 A max. Differential Front (4WD models) 1.6 qt. (1.5 L, 1.3 Imp.qt.) Vehicles with an automatic trans- Oil capacity (Reference) Rear Oil type and viscosity*1 mission 3.1 qt. (2.9 L, 2.6 Imp.qt.)*2 3.22 qt. (3.05 L, 2.68 Imp.qt.)*3 4.0 qt. (3.
9-1. Specifications 575 Automatic transmission 2TR-FE engine Fluid capacity* 9.1 qt. (8.6 L, 7.6 Imp.qt.) Vehicles without towing package: 2GR-FKS engine 10.5 qt. (9.9 L, 8.7 Imp.qt.) Vehicles with towing package: 10.7 qt. (10.1 L, 8.9 Imp.qt.) Fluid type Toyota Genuine ATF WS *: The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer.
9-1. Specifications Transfer (4WD models) Oil capacity 1.1 qt. (1.0 L, 0.9 Imp.qt.) Oil type* Toyota Genuine Transfer gear oil LF or equivalent Recommended oil viscosity SAE 75W *: Your Toyota vehicle is filled with “Toyota Genuine Transfer Gear oil LF” at the factory. Use Toyota approved “Toyota Genuine Transfer Gear oil LF” or an equivalent of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
9-1. Specifications 577 Tires and wheels Type A Tire size P245/75R16 109S Front tires: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Tire inflation pressure Rear tires: (Recommended cold 32 psi (220 kPa, 2.2 kgf/cm2 or bar) tire inflation pressure) Spare tire: 32 psi (220 kPa, 2.2 kgf/cm2 or bar) Wheel size 16 7 J, 16 7 JJ Wheel nut torque 83 ft·lbf (113 N·m, 11.5 kgf·m) Type B Tire size 265/70R16 112T Front tires: 30 psi (210 kPa, 2.
9-1. Specifications Light bulbs Light Bulbs Bulb No.
9-1. Specifications 579 Fuel information You must only use unleaded gasoline. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A..
9-1. Specifications ■ Non-recommendation of the use of blended gasoline ● Use only gasoline containing up to 15% ethanol. DO NOT use any flex-fuel or gasoline that could contain more than 15% ethanol, including from any pump labeled E30, E50, E85 (which are only some examples of fuel containing more than 15% ethanol). DO NOT use gasoline containing more than 15% ethanol.
9-1. Specifications 581 NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction. ● Do not use gasohol other than the type previously stated. Other gasohol may cause fuel system damage or vehicle performance problems.
9-1. Specifications Tire information Typical tire symbols 1 Tire size (P. 583) 2 DOT and Tire Identification Number (TIN) (P. 583) 3 Location of treadwear indicators (P. 462) 4 Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. 5 Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. 6 Load limit at maximum cold tire inflation pressure (P.
9-1. Specifications 583 Typical DOT and Tire Identification Number (TIN) 1 DOT symbol* 2 Tire Identification Number (TIN) 3 Tire manufacturer’s identifica- tion mark 4 Tire size code 5 Manufacturer’s optional type code (3 or 4 letters) tire 6 Manufacturing week 7 Manufacturing year *: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards. Tire size ■ Typical tire size information The illustration indicates typical tire size.
9-1.
9-1. Specifications 585 Uniform Tire Quality Grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information.
9-1. Specifications ■ Temperature A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
9-1. Specifications 587 Glossary of tire terminology Tire related term Meaning Tire pressure when the vehicle has been Cold tire inflation pres- parked for three hours or more, or has not been driven more than 1 mile or 1.
9-1. Specifications Tire related term Meaning Rim A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Rim diameter (Wheel diameter) Nominal diameter of the bead seat Rim size designation Rim diameter and width Rim type designation The industry manufacturer’s designation for a rim by style or code Rim width Nominal distance between rim flanges Vehicle capacity The rated cargo and luggage load plus 150 lb.
9-1.
9-1.
9-1.
9-2. Customization Customizable features Your vehicle includes a variety of electronic features that can be personalized to your preferences. The settings of these features can be changed using the multi-information display, the multimedia system, or at your Toyota dealer. Customizing vehicle features ■ Changing by using the multimedia system 1 Press the “APPS” button. Entune Audio Plus Entune Premium Audio 2 Select “Setup” on the “Apps” screen. 3 Select “Vehicle” on the “Setup” screen.
9-2. Customization 6 Select the setting to be changed. Change each setting. For items that can be enabled/disabled, and for items with an operating time that can be changed, select “On” or “Off”, or select the desired operating time. For items with sensor sensitivity that can be changed, select “+” or “-” to choose the desired level, then select “OK”. 7 A message indicating that the settings are being saved will appear. Do not perform any other operations while this message is displayed.
9-2. Customization Function*2 Drive information 1 Default setting Customized setting Digital speedometer 1 2 3 O — O O — O O — O O — O O O O O — O O — O Distance to empty Drive information 2 Average fuel economy (after reset) Current fuel economy Drive information 3 6 of the following items: P.
9-2. Customization ■ Door lock (P.
9-2. Customization ■ Smart key system* (P. 109, 121) Function Smart key system Number of permissible times of continuous smart lock Default setting Customized setting 1 2 3 On Off — — O Twice Unlimited — — O Default setting Customized setting 1 2 3 On Off — — O Driver’s door unlocked in one step, all doors unlocked in two steps All doors unlocked in one step — O O On Off — — O — O O *: If equipped ■ Wireless remote control* (P.
9-2. Customization ■ Automatic light off system* (P. 203) Function Light sensor sensitivity Time elapsed before headlights automatically turn off after doors are closed Default setting Customized setting 1 2 3 Level 3 Level 1 to 5 — O O — O O 1 2 3 — O O 0 seconds 30 seconds 60 seconds 90 seconds *: If equipped ■ Illumination (P.
9-2. Customization ■ Seat Belt Reminder Buzzer (P. 512) Function Default setting Customized setting 1 2 3 Vehicle speed linked seat belt reminder buzzer On Off — — O ■ Vehicle customization ● When the speed-detecting automatic door lock function and shift position linked door locking function (shifting gears to a position other than P locks all doors) are both on, the door lock operates as follows. • When shifting the shift lever to any position other than P, all the doors will be locked.
9-3. Items to initialize 599 Items to initialize The following items must be initialized for normal system operation after such cases as the battery being reconnected, or maintenance being performed on the vehicle: Item When to initialize Reference • After reconnecting or changing the battery • After changing a fuse P.
9-3.
For owners 10 Reporting safety defects for U.S. owners........................ 602 Seat belt instructions for Canadian owners (in French) ............................... 603 SRS airbag instructions for Canadian owners (in French) .............................. 605 Camper information ...................
Reporting safety defects for U.S. owners If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., Inc. (Toll-free: 1-800-331-4331). If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign.
Seat belt instructions for Canadian owners (in French) The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation adéquate des ceintures de sécurité ● Tirez sur la ceinture épaulière jusqu’à ce qu’elle recouvre entièrement l’épaule; elle ne doit cependant pas toucher le cou ni glisser de l’épaule.
ATTENTION ■ Dommages et usure de la ceinture de sécurité Inspectez les ceintures de sécurité périodiquement. Contrôlez qu’elles ne sont pas entaillées, effilochées, et que leurs ancrages ne sont pas desserrés. Ne pas utiliser une ceinture de sécurité défectueuse avant qu’elle ne soit remplacée. Une ceinture de sécurité défectueuse n’apporte aucune garantie de protection de l’occupant contre des blessures graves, voire mortelles.
SRS airbag instructions for Canadian owners (in French) The following is a French explanation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instructions in English.
◆ Coussins gonflables SRS frontaux 1 Coussins gonflables SRS conducteur/passager avant Participent à la protection de la tête et du thorax du conducteur et du passager avant contre les chocs avec les éléments de l’habitacle 2 Coussins gonflables SRS de genoux Participent à la protection du conducteur et du passager avant ◆ Coussins gonflables SRS latéraux et rideau 3 Coussins gonflables SRS latéraux Participent à la protection du haut du corps des occupants des sièges avant 4 Coussins gonflables SR
1 Prétensionneurs de ceintures 10 Capteur de position du siège de sécurité 2 Coussins 9 Coussin gonflable conducteur gonflables de genoux 3 Témoins indicateurs “AIR BAG ON” et “AIR BAG OFF” 4 Coussin gonflable passager avant 5 Coussins gonflables rideau 6 Coussins gonflables latéraux (sièges avant) 7 Système de classification d’occupant du siège passager avant (ECU et capteurs) 8 Témoin d’alerte SRS conducteur 11 Capteurs d’impact latéral d’impact latéral (arrière) 12 Capteurs (avant)
ATTENTION ■ Précautions avec les coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflables SRS. À défaut, des blessures graves, voire mortelles, pourraient s’ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité correctement. Les coussins gonflables SRS sont des dispositifs de protection complémentaires aux ceintures de sécurité.
ATTENTION ■ Précautions avec les coussins gonflables SRS ● Si vous attachez une rallonge de ceinture de sécurité aux boucles des ceintures de sièges avant, mais pas au pêne de la ceinture de sécurité proprement dite, les coussins gonflables SRS frontaux déterminent que le conducteur et le passager avant portent leur ceinture de sécurité, alors même qu’elle n’est pas attachée.
ATTENTION ■ Précautions avec les coussins gonflables SRS ● Ne pas s’asseoir sur le bord du siège et ne pas s’appuyer contre la planche de bord. ● Ne laissez pas un enfant debout face au coussin gonflable SRS passager avant ni assis sur les genoux d’un passager avant. ● Ne pas laisser les occupants des sièges avant voyager avec un objet sur les genoux. ● Ne pas s’appuyer contre la porte, contre le rail latéral de toit ou contre les montants avant, latéraux et arrière.
ATTENTION ■ Précautions avec les coussins gonflables SRS ● Ne rien fixer sur les parties telles que les portes, la vitre de pare-brise, les vitres latérales, les montants avant et arrière, les rails latéraux de toit et les poignées de maintien. ● Ne pas attacher à la clé des objets lourds, pointus ou très durs, comme d’autres clés par exemple.
ATTENTION ■ Précautions avec les coussins gonflables SRS ● Si les parties renfermant les coussins gonflables SRS, telles que la garniture centrale du volant de direction et les garnitures de montants avant et arrière, apparaissent abîmées ou craquelées, faites-les remplacer par votre concessionnaire Toyota. ● Ne placez aucun objet, par exemple un coussin, sur le siège du passager avant.
Camper information This information has been prepared in accordance with regulation issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/ or prospective purchasers of Toyota vehicles with information on truck-camper loading. Your Toyota dealer will help answer any questions you may have as you read this information.
Cargo weight rating and proper matching When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the manufacturer’s camper weight figure, the weight of installed additional camper equipment not included in the manufacturer’s camper weight figure, the weight of camper cargo, and the weight of passengers in the camper.
■ Cargo weight rating Trans NO. Engine missi Drive on Cab Bed Cargo Weig Pass V.C.
Gross axle and vehicle weight ratings Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the truck camper is loaded, drive to a scale and weigh on the front and on the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the Gross Axle Weight Ratings (GAWR). The total of the axle loads should not exceed the Gross Vehicle Weight Rating (GVWR).
■ GAWR and GVWR Model code* GAWR Front Except GRN310L-PRTSHA/ GRN310L-PRTLHA 2910 lb. (1320 kg) GRN310L-PRTSHA/ GRN310L-PRTLHA 3040 lb. (1380 kg) Rear 3280 lb. (1490 kg) GVWR 5600 lb. (2545 kg) *: The model code is indicated on the Certification Label. (P.
Index What to do if... (Troubleshooting) .................... 620 Alphabetical index ..................... 624 For vehicles with Entune Audio Plus or Entune Premium Audio, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S MANUAL” for information regarding the multimedia system. Audio system types: P.
What to do if... (Troubleshooting) What to do if... (Troubleshooting) If you have a problem, check the following before contacting your Toyota dealer. The doors cannot be locked, unlocked, opened or closed You lose your keys ● If you lose your keys or mechanical keys, new genuine mechanical keys can be made by your Toyota dealer. (P. 105) ● If you lose your keys or electronic keys, the risk of vehicle theft increases significantly. Contact your Toyota dealer immediately. (P.
What to do if... (Troubleshooting) 621 If you think something is wrong The engine does not start (vehicles without a smart key system) ● Vehicles with an automatic transmission: Is the shift lever in P? (P. 187) ● Vehicles with a manual transmission: Do you turn the key with the clutch pedal depressed firmly? (P. 187) ● Is the battery discharged? (P. 557) The engine does not start (vehicles with a smart key system) ● Did you press the engine switch while firmly depressing the brake pedal? (P.
What to do if... (Troubleshooting) The steering wheel cannot be turned after the engine is stopped ● Vehicles without a smart key system: It is locked to prevent theft of the vehicle if the key is removed from the engine switch. (P. 188) ● Vehicles with a smart key system: It is locked automatically to prevent theft of the vehicle. (P.
What to do if... (Troubleshooting) 623 An alarm is activated and the horn sounds (vehicles with an alarm) ● Did anyone inside the vehicle open a door during setting the alarm? The sensor detects it and the alarm sounds. (P. 78) ● Vehicles without a smart key system: To stop the alarm, turn the engine switch to the “ON” position or start the engine. ● Vehicles with a smart key system: To stop the alarm, turn the engine switch to IGNITION ON mode or start the engine.
Alphabetical index Alphabetical index A A/C .................................... 370, 376 Air conditioning filter ............. 478 Automatic air conditioning system ................................ 376 Manual air conditioning system ................................ 370 ABS (Anti-lock Brake System) .................................. 264 Function ................................ 264 Warning light......................... 511 Warning message................. 521 Active head restraints .............
Alphabetical index Automatic transmission Automatic transmission......... 195 If the shift lever cannot be shifted from P ..................... 553 S mode ................................. 197 Power mode switch............... 196 AUX port ................................... 285 Auxiliary boxes ........................ 397 B Back window............................ 148 Back-up lights Replacing light bulbs............. 495 Wattage ................................ 578 Battery .................................
Alphabetical index Child safety ................................ 50 Airbag precautions.................. 37 Battery precautions............... 560 Child restraint system ............. 51 How your child should wear the seat belt ................. 30 Installing child restraints ......... 55 Moon roof precautions .......... 152 Power window lock switch .... 145 Power window precautions ... 147 Rear door child-protector ...... 113 Removed wireless remote control/electronic key battery precautions.........
Alphabetical index E EDR (Event data recorder)........ 10 Electronic key .......................... 102 Battery-saving function ......... 123 If the electronic key does not operate properly ........... 555 Replacing the battery............ 481 Emergency, in case of If the electronic key does not operate properly ........... 555 If the engine will not start ...... 551 If the shift lever cannot be shifted from P .... 553 If the vehicle battery is discharged..........................
Alphabetical index F Flat tire...................................... 536 Floor mats .................................. 24 Fluid Automatic transmission......... 575 Brake .................................... 576 Power steering...................... 576 Washer ................................. 461 Fog lights ................................. 207 Replacing light bulbs............. 493 Switch ................................... 207 Wattage ................................ 578 Four-wheel drive system .....
Alphabetical index H Hands-free system (for cellular phone)* ..... 314, 329 Head restraints ........................ 134 Headlights ................................ 203 Light switch ........................... 203 Replacing light bulbs..... 489, 490 Wattage ................................ 578 Heaters Automatic air conditioning system ................................ 376 Manual air conditioning system ................................ 370 Seat heaters .........................
Alphabetical index J Jack Positioning the jack............... 543 Vehicle-equipped jack........... 537 Jack handle .............................. 541 Jam protection function Moon roof.............................. 150 Power windows..................... 146 K Keyless entry Smart key system ................. 110 Wireless remote control ........ 109 Keys .......................................... 102 Battery-saving function ......... 123 Electronic key ....................... 102 Engine switch..........
Alphabetical index M Maintenance Do-it-yourself maintenance... 446 General maintenance ........... 442 Maintenance data ................. 566 Maintenance requirements ... 440 Resetting the maintenance required remainder light or message........................ 441 Malfunction indicator lamp..... 510 Manual air conditioning system.................................... 370 Manual transmission............... 199 Master warning light........ 513, 519 Meter Indicators ................................
Alphabetical index P Parking assist sensors (intuitive parking assist)....... 220 Parking brake........................... 202 Operation .............................. 202 Parking brake engaged warning buzzer ................... 512 Parking brake engaged warning message ............... 525 Parking lights........................... 203 Light switch ........................... 203 Replacing light bulbs..... 492, 497 Wattage ................................ 578 Personal lights.........................
Alphabetical index Replacing Electronic key battery ........... 481 Fuses .................................... 484 Light bulbs ............................ 487 Tires...................................... 536 Wireless remote control battery ................................ 481 Reporting safety defects for U.S. owners...................... 602 Resetting the remainder light or message indicating maintenance is required....... 441 S Seat belt reminder light........... 512 Seat belts...........................
Alphabetical index Side marker lights ................... 203 Light switch ........................... 203 Replacing light bulbs..... 491, 495 Wattage ................................ 578 Side mirrors ............................. 143 Adjusting and folding ............ 143 BSM (Blind spot monitor)...... 236 Side turn signal lights ............. 201 Replacing light bulbs............. 497 Turn signal lever ................... 201 Smart key system .................... 121 Antenna location ...............
Alphabetical index Headlight switch.................... 203 Ignition switch ............... 187, 190 Intuitive parking assist .......... 220 Light switches ....................... 203 Moon roof switches............... 149 Multi-terrain Select switches.............................. 255 Outside rear view mirror defoggers switch ........ 372, 379 Outside rear view mirror switches.............................. 143 Power door lock switch ......... 111 Power mode switch...............
Alphabetical index Tires .......................................... 462 Chains................................... 271 Checking............................... 462 If you have a flat tire ............. 536 Inflation pressure .................. 577 Information............................ 582 Replacing.............................. 536 Rotating tires......................... 462 Size....................................... 577 Snow tires ............................. 272 Spare tire ........................
Alphabetical index W Warning buzzers Brake Override System ....................... 513, 522 Brake system ................ 510, 519 BSM (Blind Spot Monitor) ..... 236 Crawl Control ........................ 261 Downshifting ......................... 198 Four-wheel drive control ....... 244 Intuitive parking assist .......... 221 Key reminder ........................ 188 Light reminder....................... 206 Open door..................... 512, 524 Open moon roof............ 151, 527 Parking brake.........
Alphabetical index Warning messages.................. 519 Washer...................................... 208 Checking............................... 461 Low windshield washer fluid warning light ...................... 513 Low windshield washer fluid warning message ............... 523 Preparing and checking before winter....................... 270 Switch ................................... 208 Washing and waxing ............... 434 Weight Cargo capacity...................... 167 Cargo weight rating.....
Alphabetical index 639
GAS STATION INFORMATION Auxiliary catch lever Fuel filler door P. 448 P. 213 Hood lock release lever Tire inflation pressure P. 448 P. 577 Fuel tank capacity (Reference) Fuel type 21.1 gal. (80.0 L, 17.6 Imp.gal.) P. 570, 579 Cold tire inflation pressure P. 577 Engine oil capacity (Drain and refill — reference) P. 571 Engine oil type P.