Operation Manual

26
Sewing
侀
Thread cutter on the needle bar
侀
* The thread cutter may differ from model to model.
Line up two threads and cut with the thread cutter on
the needle bar.
侀
Thread cutter on the face cover
侀
* The thread cutter may differ from model to model.
Line up two threads and cut with the thread cutter on
the face cover.
侀
Reverse sewing
侀
Reverse sewing is performed at the beginning and
end of sewing to prevent the thread from unraveling.
Reverse sewing is performed while lowering the
reverse sewing lever.
Stitch 1 to 2 cm from the edge
of the fabric to prevent unravel-
ing at the start of sewing.
Sew 3 to 4 reverse stitches at
the end of sewing.
Note : Remove your finger from
the reverse sewing lever
to return to forward direc-
tion sewing.