Operation Manual

32
Sewing
5. Blind hem stitching
In this sewing method the stitch cannot be seen on the right side of the fabric.
Fold back the fabric so that the folded area
protrudes by about 5 to 7mm.
Iron and tack by hand.
Position the fabric so that the needle slightly
catches the fold when the needle moves to the
left.
Lower the presser foot and start sewing.
The part of the stitch that catches the fold will be
visible from the right side of the fabric.
Sew the stitch evenly so that the part of the stitch
that catches the fold is not too large or too small.
After sewing, pull out the tacking, open out the
fabric.