Operation Manual

Special specifications

Hold the thread set in the hook guide to the right

side and insert in the needle threader groove.

While raising the needle threader lever, remove

your hand from the thread. The thread is pulled

by the hook and is passed through the eye of the

needle as shown in the diagram.

Pull out the loop of the upper thread to the rear.

Note 1 : If the needle is not set correctly, it is not

possible to pass the thread through the

needle with the needle threader.

Refer to P.23 [Changing the needle].

Note 2 : Needle No. 65/9 cannot be used with this

needle threader.