Operation Manual

Page 79
English Español
Section
5
One Step Buttonhole
sewing
1. Set pattern selection dial
to 8 ( ).
2. Pull down automatic but-
tonhole lever and push
lever towards the back as
shown.
3. Hold thread lightly then
start machine.
4. Buttonhole sewing is done
in order, 1-4 as shown.
The front bar tack is sewn
first.
5. Stop machine when the
sewing comes back to
starting point. Then but-
tonhole sewing is com-
pleted.
It is recommended to make
a sample buttonhole on a
scrap piece of fabric
before making it on your
garment.
CAUTION:
DO NOT TOUCH METAL
PART OF BUTTONHOLE
LEVER
Confección de ojales
automáticos
1. Ajustar el punto al número
8 ( ) con la rueda de
selección.
2. Tirar hasta abajo de la
palanca de ojal
automático y empujarla
brevemente hasta atrás
como esta indicado.
3. Sujetar el hilo y empezar a
coser.
4. El ojal se hace en el orden
1-4 como esta sefialacdo.
El hilván delantero esta
cosido en primero.
5. Parar la máquuina cuando
llega al punto de partida.
Entonces, el ojale esta
cosido.
Esta recomendado hacer
una prueba sobre una
muestra antes de coser
su tejido.
ATENCIÓN:
NO TOCAR LA PARTE
METÁLICA DE LA
PALANCA DEL OJAL
c
1
3
4
2