Operation Manual

Page 33
English Español
Section
4
Push bobbin in the direction
of arrow .
Press down foot controller to
wind bobbin. When the bob-
bin is wiound as shown ,
stop the machine and push
the bobbin to the left as
shown to remove bobbin.
The bobbin will stop when ful-
ly wound.
Take bobbin off the spindle
and cut the thread.
Move the declutch knob in the
handwheel into the direc-
tion.
INSERTING BOBBIN
Place the bobbin in its case
with the thread running in
direction of arrow (clockwise).
Mover el carrete se indica en
la flecha .
Presionar el pedal para deva-
nar. Cuando el carrete está
como se indica en la figura
, Pare la máquina y mueva e
carrete hacia la izquierda
como se indic en la figura
para desparenderlo.
Nota: Al devanar cuide que el
volumen del hllo no
exceda la capacidad
del carrete.
Quitar el carrete del eje y cor-
tar el hilo.
Mover el botón del volante en
dirección a la aguja.( )
COLOCACIÓN DEL
CARRETE EN LA BOBINA
Colocar el carrete dentro de
al bobbin con el hilo en direc-
ción a la flecha.
b
a
c