Operation Manual

Page 39
English Español
Section
4
CHANGING NEEDLE
Set the needle in the highest
position by turning the hand-
wheel towards you.
Loosen needle clamp screw
and take out needle.
With the flat side away from
you, insert a new needle into
the needle bar.
Push needle into clamp until it
reaches stop and tighten
needle clamp screw firmly.
CAMBIO DE LA AGUJA
Colocar la aguja en la posi-
ción más alta girando el
volance hacia Ud.
Aflojar el tornillo de presión
de la aguja y quitarla.
Con la parte plana hacia
atrás, inserte la nueva aguja
dentro de la cavidad.
Empujar la aguja hacia arriba
hasta el tope figuro y apri-
ete el tornillo de presión
firmemente.
a