Owner's Manual

SECTION B:

SPECIFICATIONS

Model: BS-35(F)

Type: Combustion Type Pressure Vapor

Flue Pipe Forced Exhaust

Heating Supply System Instantaneous

Ignition: High Voltage Discharge Spark

Fuel: Kerosene only

Efficiency: 85.7%

(1)

Hot Water Output: 35.2 kW (120,000 BTU/h)

Fuel Consumption: 4.0 lit/h

Capacity of Heat Exchanger: 8.8 lit.

Fuel system: External tank

(2)

Dimensions (W x H x D): 260 x 700 x 510 mm

Weight: 25 kg (Empty)

Diameter of Required Exhaust Pipe:

106 mm

Maximum Length of Exhaust Pipe: 3 m, 3 bends or less

Electrical Rating: 220 Volts AC, 50 Hz

Ignition - 117W

Burning - 97W

Packaged Accessories: Pressure relief valve (0.19 MPa)

Pressure reducing valve (0.17 MPa)

Exhaust pipe top, Metal fuel pipe (Copper

pipe), Remote control, Aluminum tape,

Extension cord for remote control (8m)

Silenser, Exhaust pipe elbow,

Fuel pipe joint

Safety Device: Over-heat protector, Ignition safety

device, Empty burning safety device,

Heat exchanger bi-metal switch,

Tip-over switch

Exhaust Air Temperature: less than 260ºC

Nozzle: Quantity of Vapor 1.0 GPH

Spraying Angle 60º

(1) Heat and vaporized water are produced by the combustion process of this water heater.

This rating takes into account heat loss due to condensation of water vapor.

(2) External tank to be purchased from local suppliers.