Quick Start Guide

*Images may dier from your actual product.
©2022 TP-Link 7106509765 REV1.0.0
03 /
Set Up Hub
and Camera
1. Get the Tapo app from the App Store or
Google Play.
1. Twist anti-clockwise and then pull to remove
the cover of the camera. Insert the battery.
Note:
1. Charge the battery before use. It will take about 5~6 hours.
2. If you want to use the camera while charging the battery, we
recommend purchasing another battery for your convenience.
2. Align the indicator line on the cover with the
arrow icon on the camera body.
Press and rotate clockwise to the lock position
to replace the cover.
2. Follow the instructions in the Tapo app to set
up your hub.
3. Follow the instructions in the Tapo app to set
up your camera.
OR
05 /
Mount
to the Wall
04 /
Installation
Options
Stick the mounting template
to the desired mounting
place. Drill 3 holes according
to the template.
1. Drill HolesOption 1. Set on a Table
Install
Option 2. Mount to the Wall
01 /
Charge the
Battery
Method 2: Battery Inside Camera
*Check the battery status in the Tapo app after setup.
02 /
Insert the
Battery
2. Install the Bracket
Insert three anchors into
the holes and use the
screws to ax the bracket
over the anchors.
3. Install the Camera
Install the camera on the
mounting bracket, and
adjust the camera angle.
Rotate to secure
the bracket
Rotate after installing
Rotate to secure
the bracket
Rotate after installing
Install
5V USB Charger
RES
SYNC
ET
/
Solid amber
Solid green
Method 1: Battery
5V USB Charger
Charging:
Fully charged:
Closed
Open
Smart Wire-Free Security
Camera System
Quick Start Guide
1
2
Tapo C400