Item Brochure

96
WARNING: This product can expose you
to chemicals including nickel which is known
to the State of California to cause cancer,
and chromium, which is known to the State
of California to cause birth defects and/or
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
!
WARNING: This product can expose you
to chemicals including nickel which is known
to the State of California to cause cancer,
and chromium, which is known to the State
of California to cause birth defects and/or
reproductive harm. For more information go
to www.P65Warnings.ca.gov.
!
Product Specications
CABINET & CONSTRUCTION: Shall be constructed of 20 gauge
rigid steel with baked on epoxy powder coat paint for durability.
Made in U.S.A.
DISCHARGE VANES: Shall extend the entire width of the unit and
be adjustable for optimum performance of air ow.
BLOWERS: Shall be forward curved centrifugal type, DWDI with
corrosion resistance scroll and wheel.
MOTORS: Shall be heavy duty, PSC, direct drive high efciency and
designed for use with SCR
controllers. Motors shall be
permanently lubricated for
long life and have thermal
over load protection. Motor
shall have double insulation
protection for quieter
operation. Quick disconnects
shall be supplied to
accommodate easy installation
and service of motor.
SCR SPEED CONTROLLER:
Supplied on all units
compatible with the motor
with low end adjustment for
air volume control and savings
in power consumption.
ELECTRIC HEAT (OPTIONAL):
Electric heater available as
eld installed option. Electric
heater shall be steel sheath
Air Curtain with
Heater Module
NOTE: All heating sections
are constructed of totally
enclosed n tubular
elements for safety and
longer operating life. With
heating section installed,
unit becomes a 24 Volt
control unit and can utilize
a low voltage thermostat for
control of heating.
NOTE: For 72” through
120” units, order
multiple heater modules
corresponding to the actual
air curtain models
CF-C Series TPI Commercial Air Curtains
CF & CFH Series Variable Speed Air Curtains
• Super thin body, full metal housing
• Cross ow, 2-speed fans
• Adjustable air deector
• Mechanical control
• Units are 120V at 60Hz
Features
Standard Models
element with helical wound
steel ns for maximum heat
transfer and safety.
EXAMPLE
Use the example shown (left) to order unit
with heat section by specication
Model # Unit Width KW Volts Phase
CFHTR 36 10.0 208 3
| | | | |
MFG
MODEL
HEATER
WIDTH
KW VOLTS PHASE
HEATER
AMPS
MINIMUM CIRCUIT
AMPS
MAXIMUM
FUSE AMPS
BTU/H
75°C WIRE
AWG
LIST
3
208
3
8.3 10.4 15
10,239
14
240 7.2 9.0 15 14
480 3.6 4.5 15 14
277
1
10.8 13.5 15 14
208 14.4 18.0 20 12
240 12.5 15.6 20 12
5
208
3
13.8 17.25 20
17,075
12
240 12.0 15.0 20 12
480 6.0 7.5 15 14
277
1
18.0 22.5 25 10
208 24.0 30.0 35 8
240 20.8 26.6 30 10
7.5
208
3
20.8 26.0 30
25,597
10
240 18.0 22.5 25 10
480 9.0 11.3 15 14
277
1
27.0 33.8 40 8
208 36.0 45.0 50 6
240 31.2 39.0 45 8
10
208
3
27.7 34.4 40
34,130
8
240 24.0 30.1 35 8
480 12.0 15.0 20 12
277
1
36.1 45.1 50 6
240 41.6 52.0 60 6
12
208
3
33.3 41.6 45
40,956
8
240 28.8 36.0 40 8
480 14.4 18.0 20 12
277 1 43.3 54.1 60 6
15
208
3
41.6 52.0 60
51,195
6
240 36.0 36.0 55 6
480 18.0 18.0 30 10
MFG
CATALOG
NUMBER
SIZE
(in)
MFG
MODEL
NUMBER
FT. / MIN.
HI - LOW
NOZZLE
CFM
VOLTS
RPM
HI - LOW
AMPS
HI - LOW
WATTS
HI - LOW
WT.
(LBS)
LIST
STANDARD UNITS: 1/2 HP MODELS - UP TO 10’ HIGH DOORWAYS - WITHOUT HEAT SECTION
06712002 36 CF36 3288/455 2672/333
120
1659/620 3.9/3.4 472/154 74
1861
06712102 48 CF48 4168/786 4515/766 1606/583 4.4/3.6 519/189 82
2017
06712202 60 CF60 4168/764 6544/931 1636/562 4.4/3.8 509/199 90
2176
72 2 EA: CF36 3288/455 5344/666 1659/620 7.8/6.8 944/308 148
3614
96 2 EA: CF48 4168/786 9030/1532 1606/583 8.8/7.2 1038/378 164
3917
108 3 EA: CF36 3288/455 8016/999 1659/620 11.7/10.2 1416/462 222
5422
120
1 EA: CF48 4168/786
9859/1432
1606/583
12.2/10.4 1982/497 230
5572
2 EA:CF36 2672/333 1659/620
HEAVY DUTY UNITS: 3/4 HP MODELS - UP TO 12’ HIGH DOORWAYS - WITHOUT HEAT SECTION
06712302 36 CFHD36 3288/1120 2672/819
120
1689/603 4.4/4.3 603/192 77
1959
06712402 48 CFHD48 4256/929 4611/906 1662/500 5.9/4.8 586/168 85
2116
06712502 60 CFHD60 4256/924 5763/1126 1652/509 5.2/4.4 708/172 93
2278
72 2 EA: CFHD36 3288/1120 5344/1638 1689/603 8.8/8.6 1206/384 154
3804
96 2 EA: CFHD48 4256/929 9222/1812 1662/500 11.8/9.6 1172/336 170
4108
108 3 EA: CFHD36 3288/1120 8016/2457 1689/603 13.2/12.9 1809/576 231
5705
120
1 EA: CFHD48 4256/929
9955/2544
1662/500
14.7/13.4 2981/552 239
5856
2 EA: CFHD36 3288/1120 1689/603
MFG
CATALOG
NUMBER
MFG
MODEL
NUMBER
WATT S
CFM FPM NOISE LEVEL (dB) DIMENSIONS
WT.
(LBS)
LIST
HIGH LOW HIGH LOW HIGH LOW “L” “W” “H”
08764402 CF35-C 300 1177 942 2560 1968 67 65 35”
8
3
⁄4” 10
1
⁄4”
33.1
432
08764502 CF47-C 350 1648 1295 2560 1968 69 67 47” 43
501
08764602 CF59-C 400 2119 1648 2560 1968 71 69 59” 48.5
599
36” - 1424
48” - 1571
60” - 1627
CFHTR
36, 48, or
60 Inch
Width
NOTE:
12KW
maximum
on 36”
width units