Manual

TracRac Inc. 994 Jefferson St. Fall River, MA 02721 l 800-501-1578
Instruction Manual
These instructions will guide you through the 3 main component assemblies:
Upright units1.
Cross bars2.
Clamp units 3.
Please reference the drawing below for a general overview.
Tool you will need:
3/16” Allen Key•
7/32” Allen Key•
Tape Measure•
9/16” Socket and Socket Wrench•
Recommended: •
Torque Wrench
7/32” Allen Drive Bit
Non-Impact Drill
Installation Instructions
A
B