Owner's Manual

SECTION ONE: ASSEMBLY INSTRUCTIONS
MOUNTING LEGS AND WHEELS:
1. Insert Leg Left Front (64) onto Grill Frame Assembly (1) so the holes align and insert 2
each 1/4-20 x knob screws (72) into front hole. Insert 1 each 1/4-20 knurled screw (75)
onto the side.
2. Insert Leg Left Rear (65) onto Grill Frame Assembly (1) so the holes align and insert 2
each 1/4-20 x knob screws (72) into back hole. Insert 1 each 1/4-20 knurled screw (75)
onto the side.
3. Insert Leg Right Front (67) onto Grill Frame Assembly (1) so the holes align and insert 2
each 1/4-20 x knob screws (72) into front hole. Insert 1 each 1/4-20 knurled screw (75)
onto the side.
4. Insert Leg Right Rear (66) onto Grill Frame Assembly (1) so the holes align and insert 2
each 1/4-20 x knob screws (72) into back hole. Insert 1 each 1/4-20 knurled screw (75)
onto the side.
5. Insert Axle rod (68) into holes provided on both right legs (66, 67). Insert Wheel (69)
onto Axle (68) then insert Washer (70) and Nut (71) onto Axle and tighten. Repeat the
process on the other side of the Axle (68).
6. Stand the grill up on its legs and then tighten the leg bolts. Do not over tighten the
Screws.