- Wireless Ethernet Bridge USER MANUALTrangoLINK-45

Appendix A
Trango Broadband Wireless — TrangoLINK-45 page 45
Reboot: Reboot the unit.
Close All Telnet Sessions: Close all the active telnet sessions.
Configuration Screen
All user configurable parameters can be entered from the Configuration Screen and this is the only screen used to
provision a wireless link between the two radios.
Configuration Screen – Minimum Required Settings to Establish a Wireless Link
To configure a wireless link, user must (at a minimum) enter the following information:
Unit Type: Set one radio as the MU and one radio as the RU. Click on “Change Unit Type” to save the
setting.