Stand-Alone Devices Installation Operation

14
SSDTF10xx-10x
4. Is data transfer failing?
YES
• Verify the local copper connection by starting a local copper loop-back
(hardware mode: set the loop-back switch on the local device to “CL”,
software mode: enter the local copper loop-back command) and then use a
bit error test unit to run a bit error test.
• Verify the local fiber connection by starting a remote fiber loop-back
(hardware mode: set the loop-back switch on the remote device to “FL”,
software mode: enter the remote fiber loop-back command) and then use a
bit error test unit to run a bit error test.
• Verify the remote copper connection by starting a remote copper loop-back
(hardware mode: set the loop-back switch on the remote device to “CL”,
software mode: enter the remote copper loop-back command) and then use
a bit error test unit to run a bit error test.
• Verify the remote fiber connection by starting a local copper loop-back
(hardware mode: set the loop-back switch on the local device to “FL”,
software mode: enter the local fiber loop-back command) and then use a bit
error test unit to run a bit error test.
• Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
NO
• Contact Tech Support: 1-800-260-1312, Int’l: 00-1-952-941-7600.
reppoCrebiFreppoC
Local
Device
Remote
Device
Bit Error
Test Unit
Remote
Device
reppoCrebiFreppoC
Bit Error
Test Unit
Local
Device
Remote
Device
Local
Device
reppoCrebiFreppoC
Bit Error
Test Unit
Local
Device
Remote
Device
Local
Device
reppoCrebiFreppoC
Bit Error
Test Unit
Local
Device
Local
Device
Remote
Device
15
Contact Us
Technical support
Technical support is available 24 hours a day:
U.S.A. and Canada: 1-800-260-1312
International: 00-1-952-941-7600
Transition now
Chat live via the Web with Transition Networks Technical Support.
Log onto www.transition.com and click the Transition Now link.
Web-based seminars
Transition Networks provides seminars via live web-based training.
Log onto www.transition.com and click the Learning Center link.
E-Mail
Ask a question anytime by sending an e-mail to our technical support staff.
[e-mail]
Address
Transition Networks
10900 Red Circle Drive
Minnetonka, MN 55343, U.S.A.
Telephone: [phone]
Toll free: 800-526-9267
Fax: [phone]
Declaration of Conformity
Name of Mfg: Transition Networks
10900 Red Circle Drive, Minnetonka MN 55343 U.S.A.
Model: SSDTF10xx-10x SeriesDevice
Part Number: SSDTF1011-105, SSDTF1012-105, SSDTF1013-105,
SSDTF1014-105, SSDTF1015-105, SSDTF1016-105,
SSDTF1017-105, SSDTF1018-105, SSDTF1022-105,
SSDTF1025-105, SSDTF1027-105, SSDTF1029-105,
SSDTF1029-106, SSDTF1029-107, SSDTF1029-108
Regulation: EMC Directive 89/336/EEC
Purpose: To declare that the SSDTF10xx-10x to which this declaration refers is in
conformity with the following standards.
CISPR 22:1993; EN 55022:1994+A1:1995+A2:1997 Class A; EN 55024:1998; FCC Part 15
Subpart B; EN 61000-3-2:1995+A14:2000; 61000-3-3:1995; CFR 21 subpart J
I, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s) and Standard(s).
September 2008
Stephen Anderson, Vice-President of Engineering Date