Operation Manual

EN-17
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Slide the lens cover open until it clicks to turn
on the camera.


 The camera mode (default preview) is
displayed.
2. Press the  / MENU button to enter [Setup] in
any mode.
3. Select [Date/Time] with the  /  buttons,
then press the OK button.


 The Date/Time setting screen will be displayed.
4. Select the item’s field with the  /  buttons
and adjust the value for the date and time with
the  /  buttons.


 The date and time is set in the order year-
month-day-hour-minute.


 The time is displayed in 24-hours format.
5. After confirming all settings are correct, press
the OK button.
6. To exit from the menu, press continuously the
 button.
Choosing the Screen Language
Follow the steps below to choose the desired language.
1. Slide the lens cover open until it clicks to turn
on the camera.


 The camera mode (default preview) is
displayed.
2. Press the  / MENU button to enter [Setup] in
any mode.
3. Select [Language] with the  /  buttons,
then press the OK button.


 The Language setting screen will be displayed.
4. Select the displayed language with the  / 
buttons, then press the OK button.


 The setting will be stored.
5. To exit from the menu, press continuously the
 button.
Ex.: In Camera Mode
Ex.: In Camera Mode