Operation Manual

EN-25
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
Ex.: In Camera Mode
Adjusting the Exposure (EV Compensation)
You can manually adjust the exposure determined by the digital camera. Use this mode
when the proper exposure cannot be obtained, for example, when the contrast (different
between light and dark) between the subject and the background is extremely large.
The EV compensation value can be set in the range from –2.0EV to +2.0EV.
1. Slide the lens cover open until it clicks to turn
on the camera.
2. Press the  / MODE button to enter the [ ]
Movie mode.
3. Press the  / MENU button.


 The [Capture] or [Video Output] menu is
displayed.
4. Select [EV] with the  /  buttons, then press
the OK button.
5. Use  or  to set the range of EV compensation
value from -2.0EV to +2.0EV, then press the
OK button.
6. To exit from the menu, press the  button.
Setting White Balance
This feature lets you make adjustments to compensate for different lighting types
according to your shooting conditions.
1. Slide the lens cover open until it clicks to turn
on the camera.
2. Press the  / MODE button to enter the [ ]
Movie mode.
3. Press the  / MENU button.


 The [Capture] or [Video Output] menu is
displayed.
4. Select [White Balance] with the  /  buttons,
then press the OK button.
5. Select the desired setting with the  / 
buttons, then press the OK button.
6. To exit from the menu, press the  button.
EV
0.3
Ex.: In Camera Mode