Operation Manual

EN-32
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
To cancel the protection
To cancel protection for only one image, display the image that you want to remove the
image protection.
1. Select [Protect] with the  /  buttons from the playback menu, then press the OK
button.
2. Select [Single] or [All] with the  /  buttons, then press the OK button.
3. Select [Cancel] with the  /  buttons, then press the OK button.
J Press continuously the  button to return to the playback mode. The removal of
image protection has been executed.
Protecting Images/Video Clips
Set the data to read-only to prevent images from being erased by mistake.
Protecting Images
1. Press the  / MODE button twice to enter [
] Playback mode.
J The last recorded image appears on the
LCD monitor.
2. Select the image that you want to protect with
the  /  buttons.
3. Press the  / MENU button.
J The playback menu is displayed.
4. Select [Protect] with the  /  buttons, then
press the OK button.
5. Select [Single] or [All] with the  /  buttons,
then press the OK button.
6. Select [Set] with the  /  buttons, then press
the OK button.
J Press continuously the  button to return
to the playback mode.
The protect icon [ ] is displayed with the
selected image.
J When [All] has been selected, [ ] is displayed
with all the images.