Operation Manual

EN-33
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
1. Press the  / MODE button twice to enter [ ]
Playback mode.
2. Select the image that you want to set DPOF with
the  /  buttons.
3. Press the  / MENU button.
J The playback menu is displayed.
4. Select [DPOF] with the  /  buttons, and
press the OK button.
J The DPOF setting screen is displayed.
5. Select [Single] or [All] with the  /  buttons, and
press the OK button.
J Single: Sets DPOF for each individual
image.
J All: Sets DPOF for all images at once.
6. Select [Print Num.] with the  /  buttons, and
press the OK button.
J This displays the number of prints setting
screen.
7. Set the number of prints with the  / buttons,
and press the OK button.
J You can set up to 9 prints for each image.
8. Select [Date] with the  /  buttons, and
press the OK button.
J The date setting screen appears
9. Select date to [On] or [Off] with the  / 
buttons, and press the OK button.
J On: The date of the photograph will also
be printed.
J Off: The date of the photograph will not be
printed.
Setting the DPOF
DPOF (Digital Print Order Format) allows you to embed printing information on your memory
card. By using DPOF, you can select an image to be printed and then specify how many
prints or which image you would like. Take your memory card to a DPOF enabled printer that
accepts memory cards. The DPOF/card-compatible printer will read the embedded information
on the memory card and print your images as specified.