Operation Manual

EN-38
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
USING THE DIGITAL CAMERA AS A PC CAMERA
Your digital camera can act as a PC camera, which allows you to videoconference with
business associates, or have a real-time conversation with friends or family. To use the digital
camera for videoconferencing, your computer system must include the items as below:
 Microphone
 Sound card
 Speakers or headphones
 Network or Internet connection
 Video conferencing (or video editing) software is not included with the digital camera.
 This mode is not supported for Mac.
Step 1: Install the PC camera driver
The PC-camera driver included in the CD-ROM is exclusively for Windows. The PC
camera function is not supported for Mac platforms.
1. Insert the enclosed CD-ROM into your CD-ROM drive.
2. When the welcome screen appears, click “DRIVER For PC CAM” . Follow the on-
screen instructions to complete the installation.
3. After the driver installation is completed, restart your computer.
Step 2: Connect the digital camera to your computer
1. Slide the lens cover open until it clicks to turn
on the camera.
2. Connect one end of the USB cable to an
available USB port on your computer.
 The USB screen appears on the screen.
3. Use  /  to select [PC Camera], then press
the OK button.
4. Position the digital camera steadily on top of
your computer monitor or use a tripod.
 When using this digital camera as a PC camera, it is necessary to install the battery into the
digital camera.