Operation Manual

EN-47
After Sales Support TEL: [phone] WEB: www.traveler-service.com/au
CONNECTING TO A PICTBRIDGE COMPLIANT
PRINTER
If a printer that supports PictBridge is available, images can be printed by connecting
the digital still camera directly to the PictBridge-compatible printer without using a
computer.
Connecting the camera to the printer
1. Connect the USB port on the camera and the USB
jack on the printer with the supplied USB cable,
then turn on your camera and the printer.
 The screen for selecting the USB mode is
displayed.
2. Select [PRINTER] and press the OK button.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the PictBridge
menu is displayed on the monitor.
1. Select the item you want to configure with the /
buttons, and press the OK button.
 [Images]: Select whether you want to print
specific image or all images. You may also select
printing number for specific image.
 [Date Print]: According to the printer type, select
whether you want to print the image with date
imprint or not.
 [Paper Size]: Select the desired paper size
according to the printer type.
 [Layout]: Select the desired printing layout
according to the printer type.
 [Print]: After all settings are configured, select
this item to start printing.
2. If you select [Images] in the previous step, the
figure shown on the right hand side will appear.
Select [Select] or [All] with the / buttons, and
press the OK button.
 [Select]: Select to print multi images simultaneously.
 [All]: Select to print all images.
 [Exit]: Exit from Images option.