Operation Manual

– 10 – – 11 –
EN
OPERATING INSTRUCTIONS
Note: Please charge the TrekStor blaxx as described in these operating instructions for at least 3 to 4 hours
before initial use.
1) Controls for the TrekStor blaxx
Loop for neck strapA)
TFT displayB)
C)
t switch (key lock)
D)
B button
E)
O button
USB/line-in jackF)
G)
R button
Earphone jackH)
I)
P button
J)
y button
K)
9 button (Play / Pause / On / Off )
L)
D button
M)
Q button
Note: To reset, carefully press the
y button with a pointed object (such as an unbent paperclip). The reset
button is recessed deeply in the housing.
2) Connecting the TrekStor blaxx to a PC
Note for Windows® 98 users: First install the driver from the accompanying CD before connecting the blaxx to your
PC.
Use the included USB cable to connect the blaxx to a USB port in your PC. Your operating system will
automatically recognize the blaxx and will add a "d
e V i c e W i t h re m o V A b l e st o r A g e " under "my co m p u t e r ".
3) Load the TrekStor blaxx
The blaxx starts charging as soon as you connect it to a PC. The battery is charged after a maximum of 3 to
4 hours; charging automatically stops to prevent overcharging.
Note: The maximum battery life is reached only after approximately 10 charging cycles.
4) Exchanging data with the TrekStor blaxx
Files that are not copy-protected
a) Select the desired files (such as MP3) with the mouse. Copy these files by clicking them with your right
mouse button ("c
o p y ").
b) Under "m
y co m p u t e r ", select the device with removable storage, "tr e K st o r b l A x x ".
c) Click it with your right mouse button, and select "p
A s t e " to start copying. After copying has been completed,
the data will be available on the blaxx.
RESET
HOLD
#
"
$
%
&
' ( )
*
+
,
-
.