Operation Manual

– 14 –
– 15 –
EN
Mode: FM radio
Switch to the "fm
r A d i o " mode.
Note: Always connect your earphone or headphone to the headphone jack of the blaxx since the earphone / head-
phone cable serves as an antenna for the internal radio.
To invoke the FM radio menu, hold the
B button for approximately 1 second. Press the R or Q button
to select the desired menu item, and confirm by pressing the
D button. Exit the FM radio menu by press-
ing the
B button.
Switching between manual station selection and memory mode•
Briefly press the
D button to switch between manual station selection "sc A n " and the memory mode
"s
t A t i o n ".
Automatic memory assignment / automatic station scan•
To start the automatic station scan, select "A
u t o s c A n " in the FM radio menu and confirm the subsequent
inquiry. The blaxx now automatically searches for the radio stations with the strongest reception and
saves them in 20 memory locations.
Switching between saved stations•
In memory mode "s
t A t i o n ", you can switch between the existing memories by briefly pressing the O
or
P button.
Manual frequency change / manual search•
In manual station mode "s
c A n ", briefly press the O or P button to change the reception frequency
by 0.05 MHz. Hold down the
O or P button for the blaxx to automatically scan the upper and lower
frequencies for stations with strong reception.
Saving individual stations•
Change to manual station selection "s
c A n ". Choose the desired frequency and select "sA V e s t A t i o n " from
the FM radio menu. Press the
R or Q button to select the desired memory and confirm by briefly
pressing the
D button.
Setting the FM radio region•
In the radio menu, select "fm
r e g i o n " to create regional radio settings.
Recording FM radio•
Select "fm
r e c o r d " in the FM radio menu in order to start an FM radio recording. To pause the current
recording, briefly press the
D button. To restart the current recording, briefly press the D button
again. Briefly press the
B button to stop recording.
Note: All radio recordings are saved in the "fm" folder of the blaxx.
Mode: Record
Switch to "r
e c o r d " mode.
In this mode, you can execute voice recordings and line-in recordings.
You can execute voice recordings using the integrated microphone.
You can connect an external device to the line-in jack (such as a CD player) and directly record from it.
Connect the included line-in cable to the USB/line-in jack of the blaxx.
Note: By default, the blaxx performs a voice recording. If the line-in cable is connected, you can only perform
line-in recordings.
A voice/line-in recording is started automatically during the opening of "r
e c o r d " mode. To pause the cur-
rent recording, briefly press the
D button. To resume the current recording, briefly press the D button
again. Briefly press the
B button to stop recording and exit the mode.
Note: All voice recordings are saved in the "Voice" folder and all line-in recordings in the "line-in" folder of the blaxx.