Operation Manual

– 16 –
EN
– 17 –
Mode: Play recordings
Switch to "p
l A y r e c o r d i n g s " mode.
You can play voice recordings, line-in recordings, and FM radio recordings in this mode.
The operation in this mode is analogous to the operation in the "m
u s i c " mode.
Note: Recordings can only be played if they are located in the corresponding recording folder.
Mode: Videos
Switch to "V
i d e o s " mode.
You can watch movie files (*.smv) in "Videos" mode. To create movie files in SMV format, please use the
"t
r A n s c o d e r " on the accompanying CD.
The operation in this mode is analogous to the operation in the "m
u s i c " mode.
Note: No submenu is available in "V
i D e o s " mode.
Note: The blaxx can only show movie files when they are saved in the "ViDeo" folder.
Mode: Pictures
Switch to "p
i c t u r e s " mode.
You can view picture files (*.jpeg / *.bmp) in "Pictures" mode.
Note: All pictures must be in JPEG or BMP format. The blaxx can only display pictures when they are saved in the
"picture" folder. Large pictures are automatically displayed in a reduced size, which can lengthen the loading
time.
Slide show•
To start a slide show, briefly press the
9 button. Briefly press the R or Q button from the menu
that appears to select the desired picture display time and confirm by briefly pressing the
D button.
Briefly press the
9 button again to stop the slide show.
Zoom mode•
You can enlarge your pictures in this mode. Press the
B button for approximately 1 second to enlarge
the displayed picture. By pressing the
O / P / Q or R button, you can change the position of
the enlarged picture on the display.
Press the
D button in order to display the complete view of the picture.
Mode: Settings
Switch to "s
e t t i n g s " mode.
Here you can set various play modes under "p
l A y m o d e ", audio settings under "Au d i o ", display settings under
"d
i s p l A y ", time settings under "ti m e r ", recording settings under "re c o r d ", as well as general system settings
under "s
y s t e m ".
Press the
R or Q button to select the desired setting, and confirm by pressing the D button.
Exit the settings by pressing the
B button.