Operation Manual
– 10 –
– 11 –
Switch to "fm
r A d i o " mode.
Note:Alwaysconnectyourearphonestothe
i.Beat cebrax
FM
since the earphone cable serves as
an antenna for the internal radio.
Briefly press the button to open a menu. You can now start the automatic station search, save
stations and delete them. To leave FM radio mode, hold the button for about 1 second, and the
main menu will appear.
To start the automatic station search, switch in the menu to "A
u t o s c A n ", and confirm by
pressing the button. The i.Beat cebrax
FM
now automatically searches for
the radio stations with the strongest reception and saves them in 20 memory locations.
Briefly press the button to switch between manual station selection "m
A n u A l " and memory
mode "s
t A t i o n ".
In "s
t A t i o n " mode, you can switch between available presets by briefly pressing the joystick to the
left or to the right .
In "m
A n u A l " mode, briefly push the joystick to the left or right to change the
reception frequency by 0.1 MHz. Hold down the joystick to the left or right
for the i.Beat cebrax
FM
to automatically scan the upper and lower frequencies
for stations with the strongest reception.
Change to manual station selection "m
A n u A l ". Choose the desired frequency, and select "sA v e
s t A t i o n " from the menu. Select a memory by moving the joystick to the left or right
and press the button to save the station.
Select "d
e l e t e s t A t i o n " from the menu. Then select a saved station by moving the joystick to the
left or right and confirm the deletion by pressing the button.
Briefly press the button to start recording the radio. Briefly press the button again to
stop recording.
Note:Allradiorecordingsaresavedinthe"FM"folderofthei.Beat cebrax
FM
.
EN