Operation Manual

– 10 –

– 11 –

Mode:Settings

Switch to the "s

e t t i n g s " mode.

This mode allows you to set the equalizer, the different playback functions, the duration of the

display, the contrast, the energy-saving mode and the sleep timer.

Push the joystick to the left  or the right  to select the desired setting, and confirm by

pressing the  button.

Mode: System

Switch to the "s

y s t e m " mode.

In this mode, you can display the current firmware version, the entire memory and free memory

of the

i.Beat cebrax RS. You can also set or load the language and the default settings.

Push the joystick to the left  or the right  to select the desired information or setting, and

confirm by pressing the  button.

Note:

• ThisMP3playerisoptimizedfortheprovidedearphones(32Ohmimpedance).Usingotherearphoneswithalowerimpedance

 candamagetheMP3playerorearphone,especiallyMP3playerswith2earphonejacks.

• Exposing the unit to an electrostatic discharge, among other things, may interrupt the data transfer between the unit and the

computer. If this occurs, the unit should be unplugged from the USB port and then plugged in again.

• Note:Thisdevicecanproducehighvolumes.Topreventhearingloss,donotlistentohighvolumesforlongperiods.Ifyounoticea

ringing noise in your ears, lower the volume immediately or stop using the MP3 player. Please keep in mind that using earphones or

headphones at loud volumes may result in permanent hearing loss. While you become accustomed to higher volumes over time, so

that they may seem normal to you, your sense of hearing can still be impaired. The higher you adjust the volume, the faster your

sense of hearing can be damaged.

• Note:Usingearphoneswhiledrivingamotorvehicleisnotrecommendedandisprohibitedinsomecountries.Alwaysdrivecarefully

and with full concentration. Stop using your MP3 player if you become distracted or interrupted by it when driving a motor vehicle or

 duringotheractivitiesthatrequireyourfullattention.

• DonotuseUSBcableslongerthan3meters.

The manufacturer retains the right to continuously improve the product. These changes may be made without being directly

described in these quick guides. For this reason, the information provided in these quick guides may not reflect the current

state of the art.

The manufacturer only guarantees suitability for the product’s intended purpose. In addition, the manufacturer is not

responsible for damages or loss of data and subsequent consequences.

brand names of the respective owner.